Added libary files. Improved latency read from adc. (8ms instead of 16ms delay, but joystick read speed are now at 41/2 = 20 samples per second ).

Controller/Controller.ino

@@ -117,6 +117,8 @@ void mpu6050setup(){
     }
 }
 
+u_long lasttime;
+int count;
 void loop(void){
   //wait for interupt from mpu6050, in the mean time pol udp server for new data
   while (!mpuInterrupt && fifoCount < packetSize) {
@@ -149,19 +151,27 @@ void loop(void){
   //We are out of the while loop, so mpu interupt fired;
   readFifoMpu6050(&mpu6050data);  
 
-  readSwitches(&switchdata);
-
   readJoystick(&joystickdata);
-  
+
+  readSwitches(&switchdata);  
   //Send new data  
   joystickdata.button = 0;
 
   sendUdpMessage(&joystickdata, &mpu6050data, &switchdata); 
-}
+
+  if(millis() - lasttime > 1000){
+    printf("Samples per second: %d \n\r", count);
+    count = 0;
+    lasttime = millis();
+  }else{
+    count++;
+  }
+}  
 
 void readJoystick(struct JoystickData *joystickdata){
-  joystickdata->x = ads.readADC_SingleEnded(0) - joystickoffset_x;
+  joystickdata->x = ads.readADC_SingleEnded(1) - joystickoffset_x;
-  joystickdata->y = ads.readADC_SingleEnded(1) - joystickoffset_y;
+  delay(8);
+  joystickdata->y = ads.readADC_SingleEnded(0) - joystickoffset_y;
 }
 
 void readFifoMpu6050(struct MPU6050Data *mpu6050data){
@@ -196,6 +206,7 @@ void readFifoMpu6050(struct MPU6050Data *mpu6050data){
     mpu6050data->yaw = ypr[0] * 18000/M_PI;
     mpu6050data->pitch = ypr[1] * 18000/M_PI;
     mpu6050data->roll = ypr[2] * 18000/M_PI;  
+    printf("ypr: %d | %d | %d \n\r", mpu6050data->yaw, mpu6050data->pitch, mpu6050data->roll);
   }
 }
 

libraries/Adafruit_ADS1X15/Adafruit_ADS1015.cpp

@@ -0,0 +1,371 @@
+/**************************************************************************/
+/*!
+    @file     Adafruit_ADS1015.cpp
+    @author   K.Townsend (Adafruit Industries)
+    @license  BSD (see license.txt)
+
+    Driver for the ADS1015/ADS1115 ADC
+
+    This is a library for the Adafruit MPL115A2 breakout
+    ----> https://www.adafruit.com/products/???
+
+    Adafruit invests time and resources providing this open source code,
+    please support Adafruit and open-source hardware by purchasing
+    products from Adafruit!
+
+    @section  HISTORY
+
+    v1.0 - First release
+*/
+/**************************************************************************/
+#if ARDUINO >= 100
+ #include "Arduino.h"
+#else
+ #include "WProgram.h"
+#endif
+
+#include <Wire.h>
+
+#include "Adafruit_ADS1015.h"
+
+/**************************************************************************/
+/*!
+    @brief  Abstract away platform differences in Arduino wire library
+*/
+/**************************************************************************/
+static uint8_t i2cread(void) {
+  #if ARDUINO >= 100
+  return Wire.read();
+  #else
+  return Wire.receive();
+  #endif
+}
+
+/**************************************************************************/
+/*!
+    @brief  Abstract away platform differences in Arduino wire library
+*/
+/**************************************************************************/
+static void i2cwrite(uint8_t x) {
+  #if ARDUINO >= 100
+  Wire.write((uint8_t)x);
+  #else
+  Wire.send(x);
+  #endif
+}
+
+/**************************************************************************/
+/*!
+    @brief  Writes 16-bits to the specified destination register
+*/
+/**************************************************************************/
+static void writeRegister(uint8_t i2cAddress, uint8_t reg, uint16_t value) {
+  Wire.beginTransmission(i2cAddress);
+  i2cwrite((uint8_t)reg);
+  i2cwrite((uint8_t)(value>>8));
+  i2cwrite((uint8_t)(value & 0xFF));
+  Wire.endTransmission();
+}
+
+/**************************************************************************/
+/*!
+    @brief  Writes 16-bits to the specified destination register
+*/
+/**************************************************************************/
+static uint16_t readRegister(uint8_t i2cAddress, uint8_t reg) {
+  Wire.beginTransmission(i2cAddress);
+  i2cwrite(ADS1015_REG_POINTER_CONVERT);
+  Wire.endTransmission();
+  Wire.requestFrom(i2cAddress, (uint8_t)2);
+  return ((i2cread() << 8) | i2cread());  
+}
+
+/**************************************************************************/
+/*!
+    @brief  Instantiates a new ADS1015 class w/appropriate properties
+*/
+/**************************************************************************/
+Adafruit_ADS1015::Adafruit_ADS1015(uint8_t i2cAddress) 
+{
+   m_i2cAddress = i2cAddress;
+   m_conversionDelay = ADS1015_CONVERSIONDELAY;
+   m_bitShift = 4;
+   m_gain = GAIN_TWOTHIRDS; /* +/- 6.144V range (limited to VDD +0.3V max!) */
+}
+
+/**************************************************************************/
+/*!
+    @brief  Instantiates a new ADS1115 class w/appropriate properties
+*/
+/**************************************************************************/
+Adafruit_ADS1115::Adafruit_ADS1115(uint8_t i2cAddress)
+{
+   m_i2cAddress = i2cAddress;
+   m_conversionDelay = ADS1115_CONVERSIONDELAY;
+   m_bitShift = 0;
+   m_gain = GAIN_TWOTHIRDS; /* +/- 6.144V range (limited to VDD +0.3V max!) */
+}
+
+/**************************************************************************/
+/*!
+    @brief  Sets up the HW (reads coefficients values, etc.)
+*/
+/**************************************************************************/
+void Adafruit_ADS1015::begin() {
+  Wire.begin();
+}
+
+/**************************************************************************/
+/*!
+    @brief  Sets the gain and input voltage range
+*/
+/**************************************************************************/
+void Adafruit_ADS1015::setGain(adsGain_t gain)
+{
+  m_gain = gain;
+}
+
+/**************************************************************************/
+/*!
+    @brief  Gets a gain and input voltage range
+*/
+/**************************************************************************/
+adsGain_t Adafruit_ADS1015::getGain()
+{
+  return m_gain;
+}
+
+/**************************************************************************/
+/*!
+    @brief  Gets a single-ended ADC reading from the specified channel
+*/
+/**************************************************************************/
+uint16_t Adafruit_ADS1015::readADC_SingleEnded(uint8_t channel) {
+  if (channel > 3)
+  {
+    return 0;
+  }
+  
+  // Start with default values
+  uint16_t config = ADS1015_REG_CONFIG_CQUE_NONE    | // Disable the comparator (default val)
+                    ADS1015_REG_CONFIG_CLAT_NONLAT  | // Non-latching (default val)
+                    ADS1015_REG_CONFIG_CPOL_ACTVLOW | // Alert/Rdy active low   (default val)
+                    ADS1015_REG_CONFIG_CMODE_TRAD   | // Traditional comparator (default val)
+                    ADS1015_REG_CONFIG_DR_1600SPS   | // 1600 samples per second (default)
+                    ADS1015_REG_CONFIG_MODE_SINGLE;   // Single-shot mode (default)
+
+  // Set PGA/voltage range
+  config |= m_gain;
+
+  // Set single-ended input channel
+  switch (channel)
+  {
+    case (0):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_0;
+      break;
+    case (1):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_1;
+      break;
+    case (2):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_2;
+      break;
+    case (3):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_3;
+      break;
+  }
+
+  // Set 'start single-conversion' bit
+  config |= ADS1015_REG_CONFIG_OS_SINGLE;
+
+  // Write config register to the ADC
+  writeRegister(m_i2cAddress, ADS1015_REG_POINTER_CONFIG, config);
+
+  // Wait for the conversion to complete
+  //delay(m_conversionDelay);
+
+  // Read the conversion results
+  // Shift 12-bit results right 4 bits for the ADS1015
+  return readRegister(m_i2cAddress, ADS1015_REG_POINTER_CONVERT) >> m_bitShift;  
+}
+
+/**************************************************************************/
+/*! 
+    @brief  Reads the conversion results, measuring the voltage
+            difference between the P (AIN0) and N (AIN1) input.  Generates
+            a signed value since the difference can be either
+            positive or negative.
+*/
+/**************************************************************************/
+int16_t Adafruit_ADS1015::readADC_Differential_0_1() {
+  // Start with default values
+  uint16_t config = ADS1015_REG_CONFIG_CQUE_NONE    | // Disable the comparator (default val)
+                    ADS1015_REG_CONFIG_CLAT_NONLAT  | // Non-latching (default val)
+                    ADS1015_REG_CONFIG_CPOL_ACTVLOW | // Alert/Rdy active low   (default val)
+                    ADS1015_REG_CONFIG_CMODE_TRAD   | // Traditional comparator (default val)
+                    ADS1015_REG_CONFIG_DR_1600SPS   | // 1600 samples per second (default)
+                    ADS1015_REG_CONFIG_MODE_SINGLE;   // Single-shot mode (default)
+
+  // Set PGA/voltage range
+  config |= m_gain;
+                    
+  // Set channels
+  config |= ADS1015_REG_CONFIG_MUX_DIFF_0_1;          // AIN0 = P, AIN1 = N
+
+  // Set 'start single-conversion' bit
+  config |= ADS1015_REG_CONFIG_OS_SINGLE;
+
+  // Write config register to the ADC
+  writeRegister(m_i2cAddress, ADS1015_REG_POINTER_CONFIG, config);
+
+  // Wait for the conversion to complete
+  delay(m_conversionDelay);
+
+  // Read the conversion results
+  uint16_t res = readRegister(m_i2cAddress, ADS1015_REG_POINTER_CONVERT) >> m_bitShift;
+  if (m_bitShift == 0)
+  {
+    return (int16_t)res;
+  }
+  else
+  {
+    // Shift 12-bit results right 4 bits for the ADS1015,
+    // making sure we keep the sign bit intact
+    if (res > 0x07FF)
+    {
+      // negative number - extend the sign to 16th bit
+      res |= 0xF000;
+    }
+    return (int16_t)res;
+  }
+}
+
+/**************************************************************************/
+/*! 
+    @brief  Reads the conversion results, measuring the voltage
+            difference between the P (AIN2) and N (AIN3) input.  Generates
+            a signed value since the difference can be either
+            positive or negative.
+*/
+/**************************************************************************/
+int16_t Adafruit_ADS1015::readADC_Differential_2_3() {
+  // Start with default values
+  uint16_t config = ADS1015_REG_CONFIG_CQUE_NONE    | // Disable the comparator (default val)
+                    ADS1015_REG_CONFIG_CLAT_NONLAT  | // Non-latching (default val)
+                    ADS1015_REG_CONFIG_CPOL_ACTVLOW | // Alert/Rdy active low   (default val)
+                    ADS1015_REG_CONFIG_CMODE_TRAD   | // Traditional comparator (default val)
+                    ADS1015_REG_CONFIG_DR_1600SPS   | // 1600 samples per second (default)
+                    ADS1015_REG_CONFIG_MODE_SINGLE;   // Single-shot mode (default)
+
+  // Set PGA/voltage range
+  config |= m_gain;
+
+  // Set channels
+  config |= ADS1015_REG_CONFIG_MUX_DIFF_2_3;          // AIN2 = P, AIN3 = N
+
+  // Set 'start single-conversion' bit
+  config |= ADS1015_REG_CONFIG_OS_SINGLE;
+
+  // Write config register to the ADC
+  writeRegister(m_i2cAddress, ADS1015_REG_POINTER_CONFIG, config);
+
+  // Wait for the conversion to complete
+  delay(m_conversionDelay);
+
+  // Read the conversion results
+  uint16_t res = readRegister(m_i2cAddress, ADS1015_REG_POINTER_CONVERT) >> m_bitShift;
+  if (m_bitShift == 0)
+  {
+    return (int16_t)res;
+  }
+  else
+  {
+    // Shift 12-bit results right 4 bits for the ADS1015,
+    // making sure we keep the sign bit intact
+    if (res > 0x07FF)
+    {
+      // negative number - extend the sign to 16th bit
+      res |= 0xF000;
+    }
+    return (int16_t)res;
+  }
+}
+
+/**************************************************************************/
+/*!
+    @brief  Sets up the comparator to operate in basic mode, causing the
+            ALERT/RDY pin to assert (go from high to low) when the ADC
+            value exceeds the specified threshold.
+
+            This will also set the ADC in continuous conversion mode.
+*/
+/**************************************************************************/
+void Adafruit_ADS1015::startComparator_SingleEnded(uint8_t channel, int16_t threshold)
+{
+  // Start with default values
+  uint16_t config = ADS1015_REG_CONFIG_CQUE_1CONV   | // Comparator enabled and asserts on 1 match
+                    ADS1015_REG_CONFIG_CLAT_LATCH   | // Latching mode
+                    ADS1015_REG_CONFIG_CPOL_ACTVLOW | // Alert/Rdy active low   (default val)
+                    ADS1015_REG_CONFIG_CMODE_TRAD   | // Traditional comparator (default val)
+                    ADS1015_REG_CONFIG_DR_1600SPS   | // 1600 samples per second (default)
+                    ADS1015_REG_CONFIG_MODE_CONTIN  | // Continuous conversion mode
+                    ADS1015_REG_CONFIG_MODE_CONTIN;   // Continuous conversion mode
+
+  // Set PGA/voltage range
+  config |= m_gain;
+                    
+  // Set single-ended input channel
+  switch (channel)
+  {
+    case (0):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_0;
+      break;
+    case (1):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_1;
+      break;
+    case (2):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_2;
+      break;
+    case (3):
+      config |= ADS1015_REG_CONFIG_MUX_SINGLE_3;
+      break;
+  }
+
+  // Set the high threshold register
+  // Shift 12-bit results left 4 bits for the ADS1015
+  writeRegister(m_i2cAddress, ADS1015_REG_POINTER_HITHRESH, threshold << m_bitShift);
+
+  // Write config register to the ADC
+  writeRegister(m_i2cAddress, ADS1015_REG_POINTER_CONFIG, config);
+}
+
+/**************************************************************************/
+/*!
+    @brief  In order to clear the comparator, we need to read the
+            conversion results.  This function reads the last conversion
+            results without changing the config value.
+*/
+/**************************************************************************/
+int16_t Adafruit_ADS1015::getLastConversionResults()
+{
+  // Wait for the conversion to complete
+  delay(m_conversionDelay);
+
+  // Read the conversion results
+  uint16_t res = readRegister(m_i2cAddress, ADS1015_REG_POINTER_CONVERT) >> m_bitShift;
+  if (m_bitShift == 0)
+  {
+    return (int16_t)res;
+  }
+  else
+  {
+    // Shift 12-bit results right 4 bits for the ADS1015,
+    // making sure we keep the sign bit intact
+    if (res > 0x07FF)
+    {
+      // negative number - extend the sign to 16th bit
+      res |= 0xF000;
+    }
+    return (int16_t)res;
+  }
+}
+

libraries/Adafruit_ADS1X15/Adafruit_ADS1015.h

@@ -0,0 +1,150 @@
+/**************************************************************************/
+/*!
+    @file     Adafruit_ADS1015.h
+    @author   K. Townsend (Adafruit Industries)
+    @license  BSD (see license.txt)
+
+    This is a library for the Adafruit ADS1015 breakout board
+    ----> https://www.adafruit.com/products/???
+
+    Adafruit invests time and resources providing this open source code,
+    please support Adafruit and open-source hardware by purchasing
+    products from Adafruit!
+
+    @section  HISTORY
+
+    v1.0  - First release
+    v1.1  - Added ADS1115 support - W. Earl
+*/
+/**************************************************************************/
+
+#if ARDUINO >= 100
+ #include "Arduino.h"
+#else
+ #include "WProgram.h"
+#endif
+
+#include <Wire.h>
+
+/*=========================================================================
+    I2C ADDRESS/BITS
+    -----------------------------------------------------------------------*/
+    #define ADS1015_ADDRESS                 (0x48)    // 1001 000 (ADDR = GND)
+/*=========================================================================*/
+
+/*=========================================================================
+    CONVERSION DELAY (in mS)
+    -----------------------------------------------------------------------*/
+    #define ADS1015_CONVERSIONDELAY         (1)
+    #define ADS1115_CONVERSIONDELAY         (8)
+/*=========================================================================*/
+
+/*=========================================================================
+    POINTER REGISTER
+    -----------------------------------------------------------------------*/
+    #define ADS1015_REG_POINTER_MASK        (0x03)
+    #define ADS1015_REG_POINTER_CONVERT     (0x00)
+    #define ADS1015_REG_POINTER_CONFIG      (0x01)
+    #define ADS1015_REG_POINTER_LOWTHRESH   (0x02)
+    #define ADS1015_REG_POINTER_HITHRESH    (0x03)
+/*=========================================================================*/
+
+/*=========================================================================
+    CONFIG REGISTER
+    -----------------------------------------------------------------------*/
+    #define ADS1015_REG_CONFIG_OS_MASK      (0x8000)
+    #define ADS1015_REG_CONFIG_OS_SINGLE    (0x8000)  // Write: Set to start a single-conversion
+    #define ADS1015_REG_CONFIG_OS_BUSY      (0x0000)  // Read: Bit = 0 when conversion is in progress
+    #define ADS1015_REG_CONFIG_OS_NOTBUSY   (0x8000)  // Read: Bit = 1 when device is not performing a conversion
+
+    #define ADS1015_REG_CONFIG_MUX_MASK     (0x7000)
+    #define ADS1015_REG_CONFIG_MUX_DIFF_0_1 (0x0000)  // Differential P = AIN0, N = AIN1 (default)
+    #define ADS1015_REG_CONFIG_MUX_DIFF_0_3 (0x1000)  // Differential P = AIN0, N = AIN3
+    #define ADS1015_REG_CONFIG_MUX_DIFF_1_3 (0x2000)  // Differential P = AIN1, N = AIN3
+    #define ADS1015_REG_CONFIG_MUX_DIFF_2_3 (0x3000)  // Differential P = AIN2, N = AIN3
+    #define ADS1015_REG_CONFIG_MUX_SINGLE_0 (0x4000)  // Single-ended AIN0
+    #define ADS1015_REG_CONFIG_MUX_SINGLE_1 (0x5000)  // Single-ended AIN1
+    #define ADS1015_REG_CONFIG_MUX_SINGLE_2 (0x6000)  // Single-ended AIN2
+    #define ADS1015_REG_CONFIG_MUX_SINGLE_3 (0x7000)  // Single-ended AIN3
+
+    #define ADS1015_REG_CONFIG_PGA_MASK     (0x0E00)
+    #define ADS1015_REG_CONFIG_PGA_6_144V   (0x0000)  // +/-6.144V range = Gain 2/3
+    #define ADS1015_REG_CONFIG_PGA_4_096V   (0x0200)  // +/-4.096V range = Gain 1
+    #define ADS1015_REG_CONFIG_PGA_2_048V   (0x0400)  // +/-2.048V range = Gain 2 (default)
+    #define ADS1015_REG_CONFIG_PGA_1_024V   (0x0600)  // +/-1.024V range = Gain 4
+    #define ADS1015_REG_CONFIG_PGA_0_512V   (0x0800)  // +/-0.512V range = Gain 8
+    #define ADS1015_REG_CONFIG_PGA_0_256V   (0x0A00)  // +/-0.256V range = Gain 16
+
+    #define ADS1015_REG_CONFIG_MODE_MASK    (0x0100)
+    #define ADS1015_REG_CONFIG_MODE_CONTIN  (0x0000)  // Continuous conversion mode
+    #define ADS1015_REG_CONFIG_MODE_SINGLE  (0x0100)  // Power-down single-shot mode (default)
+
+    #define ADS1015_REG_CONFIG_DR_MASK      (0x00E0)  
+    #define ADS1015_REG_CONFIG_DR_128SPS    (0x0000)  // 128 samples per second
+    #define ADS1015_REG_CONFIG_DR_250SPS    (0x0020)  // 250 samples per second
+    #define ADS1015_REG_CONFIG_DR_490SPS    (0x0040)  // 490 samples per second
+    #define ADS1015_REG_CONFIG_DR_920SPS    (0x0060)  // 920 samples per second
+    #define ADS1015_REG_CONFIG_DR_1600SPS   (0x0080)  // 1600 samples per second (default)
+    #define ADS1015_REG_CONFIG_DR_2400SPS   (0x00A0)  // 2400 samples per second
+    #define ADS1015_REG_CONFIG_DR_3300SPS   (0x00C0)  // 3300 samples per second
+
+    #define ADS1015_REG_CONFIG_CMODE_MASK   (0x0010)
+    #define ADS1015_REG_CONFIG_CMODE_TRAD   (0x0000)  // Traditional comparator with hysteresis (default)
+    #define ADS1015_REG_CONFIG_CMODE_WINDOW (0x0010)  // Window comparator
+
+    #define ADS1015_REG_CONFIG_CPOL_MASK    (0x0008)
+    #define ADS1015_REG_CONFIG_CPOL_ACTVLOW (0x0000)  // ALERT/RDY pin is low when active (default)
+    #define ADS1015_REG_CONFIG_CPOL_ACTVHI  (0x0008)  // ALERT/RDY pin is high when active
+
+    #define ADS1015_REG_CONFIG_CLAT_MASK    (0x0004)  // Determines if ALERT/RDY pin latches once asserted
+    #define ADS1015_REG_CONFIG_CLAT_NONLAT  (0x0000)  // Non-latching comparator (default)
+    #define ADS1015_REG_CONFIG_CLAT_LATCH   (0x0004)  // Latching comparator
+
+    #define ADS1015_REG_CONFIG_CQUE_MASK    (0x0003)
+    #define ADS1015_REG_CONFIG_CQUE_1CONV   (0x0000)  // Assert ALERT/RDY after one conversions
+    #define ADS1015_REG_CONFIG_CQUE_2CONV   (0x0001)  // Assert ALERT/RDY after two conversions
+    #define ADS1015_REG_CONFIG_CQUE_4CONV   (0x0002)  // Assert ALERT/RDY after four conversions
+    #define ADS1015_REG_CONFIG_CQUE_NONE    (0x0003)  // Disable the comparator and put ALERT/RDY in high state (default)
+/*=========================================================================*/
+
+typedef enum
+{
+  GAIN_TWOTHIRDS    = ADS1015_REG_CONFIG_PGA_6_144V,
+  GAIN_ONE          = ADS1015_REG_CONFIG_PGA_4_096V,
+  GAIN_TWO          = ADS1015_REG_CONFIG_PGA_2_048V,
+  GAIN_FOUR         = ADS1015_REG_CONFIG_PGA_1_024V,
+  GAIN_EIGHT        = ADS1015_REG_CONFIG_PGA_0_512V,
+  GAIN_SIXTEEN      = ADS1015_REG_CONFIG_PGA_0_256V
+} adsGain_t;
+
+class Adafruit_ADS1015
+{
+protected:
+   // Instance-specific properties
+   uint8_t   m_i2cAddress;
+   uint8_t   m_conversionDelay;
+   uint8_t   m_bitShift;
+   adsGain_t m_gain;
+
+ public:
+  Adafruit_ADS1015(uint8_t i2cAddress = ADS1015_ADDRESS);
+  void begin(void);
+  uint16_t  readADC_SingleEnded(uint8_t channel);
+  int16_t   readADC_Differential_0_1(void);
+  int16_t   readADC_Differential_2_3(void);
+  void      startComparator_SingleEnded(uint8_t channel, int16_t threshold);
+  int16_t   getLastConversionResults();
+  void      setGain(adsGain_t gain);
+  adsGain_t getGain(void);
+
+ private:
+};
+
+// Derive from ADS1105 & override construction to set properties
+class Adafruit_ADS1115 : public Adafruit_ADS1015
+{
+ public:
+  Adafruit_ADS1115(uint8_t i2cAddress = ADS1015_ADDRESS);
+
+ private:
+};

libraries/Adafruit_ADS1X15/README.md

@@ -0,0 +1,4 @@
+Adafruit_ADS1015
+================
+
+Driver for TI's ADS1015: 12-bit Differential or Single-Ended ADC with PGA and Comparator

libraries/Adafruit_ADS1X15/examples/comparator/comparator.pde

@@ -0,0 +1,44 @@
+#include <Wire.h>
+#include <Adafruit_ADS1015.h>
+
+// Adafruit_ADS1115 ads;  /* Use this for the 16-bit version */
+Adafruit_ADS1015 ads;     /* Use thi for the 12-bit version */
+
+void setup(void) 
+{
+  Serial.begin(9600);
+  Serial.println("Hello!");
+  
+  Serial.println("Single-ended readings from AIN0 with >3.0V comparator");
+  Serial.println("ADC Range: +/- 6.144V (1 bit = 3mV/ADS1015, 0.1875mV/ADS1115)");
+  Serial.println("Comparator Threshold: 1000 (3.000V)");
+  
+  // The ADC input range (or gain) can be changed via the following
+  // functions, but be careful never to exceed VDD +0.3V max, or to
+  // exceed the upper and lower limits if you adjust the input range!
+  // Setting these values incorrectly may destroy your ADC!
+  //                                                                ADS1015  ADS1115
+  //                                                                -------  -------
+  // ads.setGain(GAIN_TWOTHIRDS);  // 2/3x gain +/- 6.144V  1 bit = 3mV      0.1875mV (default)
+  // ads.setGain(GAIN_ONE);        // 1x gain   +/- 4.096V  1 bit = 2mV      0.125mV
+  // ads.setGain(GAIN_TWO);        // 2x gain   +/- 2.048V  1 bit = 1mV      0.0625mV
+  // ads.setGain(GAIN_FOUR);       // 4x gain   +/- 1.024V  1 bit = 0.5mV    0.03125mV
+  // ads.setGain(GAIN_EIGHT);      // 8x gain   +/- 0.512V  1 bit = 0.25mV   0.015625mV
+  // ads.setGain(GAIN_SIXTEEN);    // 16x gain  +/- 0.256V  1 bit = 0.125mV  0.0078125mV
+  
+  ads.begin();
+  
+  // Setup 3V comparator on channel 0
+  ads.startComparator_SingleEnded(0, 1000);
+}
+
+void loop(void) 
+{
+  int16_t adc0;
+
+  // Comparator will only de-assert after a read
+  adc0 = ads.getLastConversionResults();
+  Serial.print("AIN0: "); Serial.println(adc0);
+  
+  delay(100);
+}

libraries/Adafruit_ADS1X15/examples/differential/differential.pde

@@ -0,0 +1,44 @@
+#include <Wire.h>
+#include <Adafruit_ADS1015.h>
+
+// Adafruit_ADS1115 ads;  /* Use this for the 16-bit version */
+Adafruit_ADS1015 ads;     /* Use thi for the 12-bit version */
+
+void setup(void)
+{
+  Serial.begin(9600);
+  Serial.println("Hello!");
+  
+  Serial.println("Getting differential reading from AIN0 (P) and AIN1 (N)");
+  Serial.println("ADC Range: +/- 6.144V (1 bit = 3mV/ADS1015, 0.1875mV/ADS1115)");
+  
+  // The ADC input range (or gain) can be changed via the following
+  // functions, but be careful never to exceed VDD +0.3V max, or to
+  // exceed the upper and lower limits if you adjust the input range!
+  // Setting these values incorrectly may destroy your ADC!
+  //                                                                ADS1015  ADS1115
+  //                                                                -------  -------
+  // ads.setGain(GAIN_TWOTHIRDS);  // 2/3x gain +/- 6.144V  1 bit = 3mV      0.1875mV (default)
+  // ads.setGain(GAIN_ONE);        // 1x gain   +/- 4.096V  1 bit = 2mV      0.125mV
+  // ads.setGain(GAIN_TWO);        // 2x gain   +/- 2.048V  1 bit = 1mV      0.0625mV
+  // ads.setGain(GAIN_FOUR);       // 4x gain   +/- 1.024V  1 bit = 0.5mV    0.03125mV
+  // ads.setGain(GAIN_EIGHT);      // 8x gain   +/- 0.512V  1 bit = 0.25mV   0.015625mV
+  // ads.setGain(GAIN_SIXTEEN);    // 16x gain  +/- 0.256V  1 bit = 0.125mV  0.0078125mV
+  
+  ads.begin();
+}
+
+void loop(void)
+{
+  int16_t results;
+  
+  /* Be sure to update this value based on the IC and the gain settings! */
+  float   multiplier = 3.0F;    /* ADS1015 @ +/- 6.144V gain (12-bit results) */
+  //float multiplier = 0.1875F; /* ADS1115  @ +/- 6.144V gain (16-bit results) */
+
+  results = ads.readADC_Differential_0_1();  
+    
+  Serial.print("Differential: "); Serial.print(results); Serial.print("("); Serial.print(results * multiplier); Serial.println("mV)");
+
+  delay(1000);
+}

libraries/Adafruit_ADS1X15/examples/singleended/singleended.pde

@@ -0,0 +1,46 @@
+#include <Wire.h>
+#include <Adafruit_ADS1015.h>
+
+// Adafruit_ADS1115 ads;  /* Use this for the 16-bit version */
+Adafruit_ADS1015 ads;     /* Use thi for the 12-bit version */
+
+void setup(void) 
+{
+  Serial.begin(9600);
+  Serial.println("Hello!");
+  
+  Serial.println("Getting single-ended readings from AIN0..3");
+  Serial.println("ADC Range: +/- 6.144V (1 bit = 3mV/ADS1015, 0.1875mV/ADS1115)");
+  
+  // The ADC input range (or gain) can be changed via the following
+  // functions, but be careful never to exceed VDD +0.3V max, or to
+  // exceed the upper and lower limits if you adjust the input range!
+  // Setting these values incorrectly may destroy your ADC!
+  //                                                                ADS1015  ADS1115
+  //                                                                -------  -------
+  // ads.setGain(GAIN_TWOTHIRDS);  // 2/3x gain +/- 6.144V  1 bit = 3mV      0.1875mV (default)
+  // ads.setGain(GAIN_ONE);        // 1x gain   +/- 4.096V  1 bit = 2mV      0.125mV
+  // ads.setGain(GAIN_TWO);        // 2x gain   +/- 2.048V  1 bit = 1mV      0.0625mV
+  // ads.setGain(GAIN_FOUR);       // 4x gain   +/- 1.024V  1 bit = 0.5mV    0.03125mV
+  // ads.setGain(GAIN_EIGHT);      // 8x gain   +/- 0.512V  1 bit = 0.25mV   0.015625mV
+  // ads.setGain(GAIN_SIXTEEN);    // 16x gain  +/- 0.256V  1 bit = 0.125mV  0.0078125mV
+  
+  ads.begin();
+}
+
+void loop(void) 
+{
+  int16_t adc0, adc1, adc2, adc3;
+
+  adc0 = ads.readADC_SingleEnded(0);
+  adc1 = ads.readADC_SingleEnded(1);
+  adc2 = ads.readADC_SingleEnded(2);
+  adc3 = ads.readADC_SingleEnded(3);
+  Serial.print("AIN0: "); Serial.println(adc0);
+  Serial.print("AIN1: "); Serial.println(adc1);
+  Serial.print("AIN2: "); Serial.println(adc2);
+  Serial.print("AIN3: "); Serial.println(adc3);
+  Serial.println(" ");
+  
+  delay(1000);
+}

libraries/Adafruit_ADS1X15/library.properties

@@ -0,0 +1,9 @@
+name=Adafruit ADS1X15
+version=1.0.0
+author=Adafruit
+maintainer=Adafruit <info@adafruit.com>
+sentence=Driver for TI's ADS1015: 12-bit Differential or Single-Ended ADC with PGA and Comparator
+paragraph=Driver for TI's ADS1015: 12-bit Differential or Single-Ended ADC with PGA and Comparator
+category=Signal Input/Output
+url=https://github.com/adafruit/Adafruit_ADS1X15
+architectures=*

libraries/Adafruit_ADS1X15/license.txt

@@ -0,0 +1,26 @@
+Software License Agreement (BSD License)
+
+Copyright (c) 2012, Adafruit Industries
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+1. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+3. Neither the name of the copyright holders nor the
+names of its contributors may be used to endorse or promote products
+derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

libraries/I2Cdev/I2Cdev.h

@@ -0,0 +1,269 @@
+// I2Cdev library collection - Main I2C device class header file
+// Abstracts bit and byte I2C R/W functions into a convenient class
+// 6/9/2012 by Jeff Rowberg <jeff@rowberg.net>
+//
+// Changelog:
+//      2013-05-06 - add Francesco Ferrara's Fastwire v0.24 implementation with small modifications
+//      2013-05-05 - fix issue with writing bit values to words (Sasquatch/Farzanegan)
+//      2012-06-09 - fix major issue with reading > 32 bytes at a time with Arduino Wire
+//                 - add compiler warnings when using outdated or IDE or limited I2Cdev implementation
+//      2011-11-01 - fix write*Bits mask calculation (thanks sasquatch @ Arduino forums)
+//      2011-10-03 - added automatic Arduino version detection for ease of use
+//      2011-10-02 - added Gene Knight's NBWire TwoWire class implementation with small modifications
+//      2011-08-31 - added support for Arduino 1.0 Wire library (methods are different from 0.x)
+//      2011-08-03 - added optional timeout parameter to read* methods to easily change from default
+//      2011-08-02 - added support for 16-bit registers
+//                 - fixed incorrect Doxygen comments on some methods
+//                 - added timeout value for read operations (thanks mem @ Arduino forums)
+//      2011-07-30 - changed read/write function structures to return success or byte counts
+//                 - made all methods static for multi-device memory savings
+//      2011-07-28 - initial release
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2013 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+#ifndef _I2CDEV_H_
+#define _I2CDEV_H_
+
+// -----------------------------------------------------------------------------
+// I2C interface implementation setting
+// -----------------------------------------------------------------------------
+#define I2CDEV_IMPLEMENTATION       I2CDEV_ARDUINO_WIRE
+//#define I2CDEV_IMPLEMENTATION       I2CDEV_BUILTIN_FASTWIRE
+
+// comment this out if you are using a non-optimal IDE/implementation setting
+// but want the compiler to shut up about it
+#define I2CDEV_IMPLEMENTATION_WARNINGS
+
+// -----------------------------------------------------------------------------
+// I2C interface implementation options
+// -----------------------------------------------------------------------------
+#define I2CDEV_ARDUINO_WIRE         1 // Wire object from Arduino
+#define I2CDEV_BUILTIN_NBWIRE       2 // Tweaked Wire object from Gene Knight's NBWire project
+                                      // ^^^ NBWire implementation is still buggy w/some interrupts!
+#define I2CDEV_BUILTIN_FASTWIRE     3 // FastWire object from Francesco Ferrara's project
+#define I2CDEV_I2CMASTER_LIBRARY    4 // I2C object from DSSCircuits I2C-Master Library at https://github.com/DSSCircuits/I2C-Master-Library
+
+// -----------------------------------------------------------------------------
+// Arduino-style "Serial.print" debug constant (uncomment to enable)
+// -----------------------------------------------------------------------------
+//#define I2CDEV_SERIAL_DEBUG
+
+#ifdef ARDUINO
+    #if ARDUINO < 100
+        #include "WProgram.h"
+    #else
+        #include "Arduino.h"
+    #endif
+    #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
+        #include <Wire.h>
+    #endif
+    #if I2CDEV_IMPLEMENTATION == I2CDEV_I2CMASTER_LIBRARY
+        #include <I2C.h>
+    #endif
+#endif
+
+// 1000ms default read timeout (modify with "I2Cdev::readTimeout = [ms];")
+#define I2CDEV_DEFAULT_READ_TIMEOUT     1000
+
+class I2Cdev {
+    public:
+        I2Cdev();
+        
+        static int8_t readBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readBitW(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readBitsW(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint16_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readByte(uint8_t devAddr, uint8_t regAddr, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readWord(uint8_t devAddr, uint8_t regAddr, uint16_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readBytes(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8_t *data, uint16_t timeout=I2Cdev::readTimeout);
+        static int8_t readWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint16_t *data, uint16_t timeout=I2Cdev::readTimeout);
+
+        static bool writeBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint8_t data);
+        static bool writeBitW(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t data);
+        static bool writeBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint8_t data);
+        static bool writeBitsW(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint16_t data);
+        static bool writeByte(uint8_t devAddr, uint8_t regAddr, uint8_t data);
+        static bool writeWord(uint8_t devAddr, uint8_t regAddr, uint16_t data);
+        static bool writeBytes(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8_t *data);
+        static bool writeWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint16_t *data);
+
+        static uint16_t readTimeout;
+};
+
+#if I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE
+    //////////////////////
+    // FastWire 0.24
+    // This is a library to help faster programs to read I2C devices.
+    // Copyright(C) 2012
+    // Francesco Ferrara
+    //////////////////////
+    
+    /* Master */
+    #define TW_START                0x08
+    #define TW_REP_START            0x10
+
+    /* Master Transmitter */
+    #define TW_MT_SLA_ACK           0x18
+    #define TW_MT_SLA_NACK          0x20
+    #define TW_MT_DATA_ACK          0x28
+    #define TW_MT_DATA_NACK         0x30
+    #define TW_MT_ARB_LOST          0x38
+
+    /* Master Receiver */
+    #define TW_MR_ARB_LOST          0x38
+    #define TW_MR_SLA_ACK           0x40
+    #define TW_MR_SLA_NACK          0x48
+    #define TW_MR_DATA_ACK          0x50
+    #define TW_MR_DATA_NACK         0x58
+
+    #define TW_OK                   0
+    #define TW_ERROR                1
+
+    class Fastwire {
+        private:
+            static boolean waitInt();
+
+        public:
+            static void setup(int khz, boolean pullup);
+            static byte beginTransmission(byte device);
+            static byte write(byte value);
+            static byte writeBuf(byte device, byte address, byte *data, byte num);
+            static byte readBuf(byte device, byte address, byte *data, byte num);
+            static void reset();
+            static byte stop();
+    };
+#endif
+
+#if I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE
+    // NBWire implementation based heavily on code by Gene Knight <Gene@Telobot.com>
+    // Originally posted on the Arduino forum at http://arduino.cc/forum/index.php/topic,70705.0.html
+    // Originally offered to the i2cdevlib project at http://arduino.cc/forum/index.php/topic,68210.30.html
+
+    #define NBWIRE_BUFFER_LENGTH 32
+    
+    class TwoWire {
+        private:
+            static uint8_t rxBuffer[];
+            static uint8_t rxBufferIndex;
+            static uint8_t rxBufferLength;
+        
+            static uint8_t txAddress;
+            static uint8_t txBuffer[];
+            static uint8_t txBufferIndex;
+            static uint8_t txBufferLength;
+        
+            // static uint8_t transmitting;
+            static void (*user_onRequest)(void);
+            static void (*user_onReceive)(int);
+            static void onRequestService(void);
+            static void onReceiveService(uint8_t*, int);
+    
+        public:
+            TwoWire();
+            void begin();
+            void begin(uint8_t);
+            void begin(int);
+            void beginTransmission(uint8_t);
+            //void beginTransmission(int);
+            uint8_t endTransmission(uint16_t timeout=0);
+            void nbendTransmission(void (*function)(int)) ;
+            uint8_t requestFrom(uint8_t, int, uint16_t timeout=0);
+            //uint8_t requestFrom(int, int);
+            void nbrequestFrom(uint8_t, int, void (*function)(int));
+            void send(uint8_t);
+            void send(uint8_t*, uint8_t);
+            //void send(int);
+            void send(char*);
+            uint8_t available(void);
+            uint8_t receive(void);
+            void onReceive(void (*)(int));
+            void onRequest(void (*)(void));
+    };
+    
+    #define TWI_READY   0
+    #define TWI_MRX     1
+    #define TWI_MTX     2
+    #define TWI_SRX     3
+    #define TWI_STX     4
+    
+    #define TW_WRITE    0
+    #define TW_READ     1
+    
+    #define TW_MT_SLA_NACK      0x20
+    #define TW_MT_DATA_NACK     0x30
+    
+    #define CPU_FREQ            16000000L
+    #define TWI_FREQ            100000L
+    #define TWI_BUFFER_LENGTH   32
+    
+    /* TWI Status is in TWSR, in the top 5 bits: TWS7 - TWS3 */
+    
+    #define TW_STATUS_MASK              (_BV(TWS7)|_BV(TWS6)|_BV(TWS5)|_BV(TWS4)|_BV(TWS3))
+    #define TW_STATUS                   (TWSR & TW_STATUS_MASK)
+    #define TW_START                    0x08
+    #define TW_REP_START                0x10
+    #define TW_MT_SLA_ACK               0x18
+    #define TW_MT_SLA_NACK              0x20
+    #define TW_MT_DATA_ACK              0x28
+    #define TW_MT_DATA_NACK             0x30
+    #define TW_MT_ARB_LOST              0x38
+    #define TW_MR_ARB_LOST              0x38
+    #define TW_MR_SLA_ACK               0x40
+    #define TW_MR_SLA_NACK              0x48
+    #define TW_MR_DATA_ACK              0x50
+    #define TW_MR_DATA_NACK             0x58
+    #define TW_ST_SLA_ACK               0xA8
+    #define TW_ST_ARB_LOST_SLA_ACK      0xB0
+    #define TW_ST_DATA_ACK              0xB8
+    #define TW_ST_DATA_NACK             0xC0
+    #define TW_ST_LAST_DATA             0xC8
+    #define TW_SR_SLA_ACK               0x60
+    #define TW_SR_ARB_LOST_SLA_ACK      0x68
+    #define TW_SR_GCALL_ACK             0x70
+    #define TW_SR_ARB_LOST_GCALL_ACK    0x78
+    #define TW_SR_DATA_ACK              0x80
+    #define TW_SR_DATA_NACK             0x88
+    #define TW_SR_GCALL_DATA_ACK        0x90
+    #define TW_SR_GCALL_DATA_NACK       0x98
+    #define TW_SR_STOP                  0xA0
+    #define TW_NO_INFO                  0xF8
+    #define TW_BUS_ERROR                0x00
+    
+    //#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
+    //#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr))
+    
+    #ifndef sbi // set bit
+        #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+    #endif // sbi
+    
+    #ifndef cbi // clear bit
+        #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+    #endif // cbi
+    
+    extern TwoWire Wire;
+
+#endif // I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE
+
+#endif /* _I2CDEV_H_ */

libraries/I2Cdev/keywords.txt

@@ -0,0 +1,38 @@
+#######################################
+# Syntax Coloring Map For I2Cdev
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+I2Cdev	KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+readBit	KEYWORD2
+readBitW	KEYWORD2
+readBits	KEYWORD2
+readBitsW	KEYWORD2
+readByte	KEYWORD2
+readBytes	KEYWORD2
+readWord	KEYWORD2
+readWords	KEYWORD2
+writeBit	KEYWORD2
+writeBitW	KEYWORD2
+writeBits	KEYWORD2
+writeBitsW	KEYWORD2
+writeByte	KEYWORD2
+writeBytes	KEYWORD2
+writeWord	KEYWORD2
+writeWords	KEYWORD2
+
+#######################################
+# Instances (KEYWORD2)
+#######################################
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+

libraries/I2Cdev/library.json

@@ -0,0 +1,13 @@
+{
+  "name": "I2Cdevlib-Core",
+  "keywords": "i2cdevlib, i2c",
+  "description": "The I2C Device Library (I2Cdevlib) is a collection of uniform and well-documented classes to provide simple and intuitive interfaces to I2C devices.",
+  "include": "Arduino/I2Cdev",
+  "repository":
+  {
+    "type": "git",
+    "url": "https://github.com/jrowberg/i2cdevlib.git"
+  },
+  "frameworks": "arduino",
+  "platforms": "atmelavr"
+}

libraries/MPU6050/Examples/MPU6050_DMP6/MPU6050_DMP6.ino

@@ -0,0 +1,372 @@
+// I2C device class (I2Cdev) demonstration Arduino sketch for MPU6050 class using DMP (MotionApps v2.0)
+// 6/21/2012 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//      2013-05-08 - added seamless Fastwire support
+//                 - added note about gyro calibration
+//      2012-06-21 - added note about Arduino 1.0.1 + Leonardo compatibility error
+//      2012-06-20 - improved FIFO overflow handling and simplified read process
+//      2012-06-19 - completely rearranged DMP initialization code and simplification
+//      2012-06-13 - pull gyro and accel data from FIFO packet instead of reading directly
+//      2012-06-09 - fix broken FIFO read sequence and change interrupt detection to RISING
+//      2012-06-05 - add gravity-compensated initial reference frame acceleration output
+//                 - add 3D math helper file to DMP6 example sketch
+//                 - add Euler output and Yaw/Pitch/Roll output formats
+//      2012-06-04 - remove accel offset clearing for better results (thanks Sungon Lee)
+//      2012-06-01 - fixed gyro sensitivity to be 2000 deg/sec instead of 250
+//      2012-05-30 - basic DMP initialization working
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2012 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+// I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files
+// for both classes must be in the include path of your project
+#include "I2Cdev.h"
+
+#include "MPU6050_6Axis_MotionApps20.h"
+//#include "MPU6050.h" // not necessary if using MotionApps include file
+
+// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation
+// is used in I2Cdev.h
+#if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
+    #include "Wire.h"
+#endif
+
+// class default I2C address is 0x68
+// specific I2C addresses may be passed as a parameter here
+// AD0 low = 0x68 (default for SparkFun breakout and InvenSense evaluation board)
+// AD0 high = 0x69
+MPU6050 mpu;
+//MPU6050 mpu(0x69); // <-- use for AD0 high
+
+/* =========================================================================
+   NOTE: In addition to connection 3.3v, GND, SDA, and SCL, this sketch
+   depends on the MPU-6050's INT pin being connected to the Arduino's
+   external interrupt #0 pin. On the Arduino Uno and Mega 2560, this is
+   digital I/O pin 2.
+ * ========================================================================= */
+
+/* =========================================================================
+   NOTE: Arduino v1.0.1 with the Leonardo board generates a compile error
+   when using Serial.write(buf, len). The Teapot output uses this method.
+   The solution requires a modification to the Arduino USBAPI.h file, which
+   is fortunately simple, but annoying. This will be fixed in the next IDE
+   release. For more info, see these links:
+
+   http://arduino.cc/forum/index.php/topic,109987.0.html
+   http://code.google.com/p/arduino/issues/detail?id=958
+ * ========================================================================= */
+
+
+
+// uncomment "OUTPUT_READABLE_QUATERNION" if you want to see the actual
+// quaternion components in a [w, x, y, z] format (not best for parsing
+// on a remote host such as Processing or something though)
+//#define OUTPUT_READABLE_QUATERNION
+
+// uncomment "OUTPUT_READABLE_EULER" if you want to see Euler angles
+// (in degrees) calculated from the quaternions coming from the FIFO.
+// Note that Euler angles suffer from gimbal lock (for more info, see
+// http://en.wikipedia.org/wiki/Gimbal_lock)
+//#define OUTPUT_READABLE_EULER
+
+// uncomment "OUTPUT_READABLE_YAWPITCHROLL" if you want to see the yaw/
+// pitch/roll angles (in degrees) calculated from the quaternions coming
+// from the FIFO. Note this also requires gravity vector calculations.
+// Also note that yaw/pitch/roll angles suffer from gimbal lock (for
+// more info, see: http://en.wikipedia.org/wiki/Gimbal_lock)
+#define OUTPUT_READABLE_YAWPITCHROLL
+
+// uncomment "OUTPUT_READABLE_REALACCEL" if you want to see acceleration
+// components with gravity removed. This acceleration reference frame is
+// not compensated for orientation, so +X is always +X according to the
+// sensor, just without the effects of gravity. If you want acceleration
+// compensated for orientation, us OUTPUT_READABLE_WORLDACCEL instead.
+//#define OUTPUT_READABLE_REALACCEL
+
+// uncomment "OUTPUT_READABLE_WORLDACCEL" if you want to see acceleration
+// components with gravity removed and adjusted for the world frame of
+// reference (yaw is relative to initial orientation, since no magnetometer
+// is present in this case). Could be quite handy in some cases.
+//#define OUTPUT_READABLE_WORLDACCEL
+
+// uncomment "OUTPUT_TEAPOT" if you want output that matches the
+// format used for the InvenSense teapot demo
+//#define OUTPUT_TEAPOT
+
+
+
+#define LED_PIN 13 // (Arduino is 13, Teensy is 11, Teensy++ is 6)
+bool blinkState = false;
+
+// MPU control/status vars
+bool dmpReady = false;  // set true if DMP init was successful
+uint8_t mpuIntStatus;   // holds actual interrupt status byte from MPU
+uint8_t devStatus;      // return status after each device operation (0 = success, !0 = error)
+uint16_t packetSize;    // expected DMP packet size (default is 42 bytes)
+uint16_t fifoCount;     // count of all bytes currently in FIFO
+uint8_t fifoBuffer[64]; // FIFO storage buffer
+
+// orientation/motion vars
+Quaternion q;           // [w, x, y, z]         quaternion container
+VectorInt16 aa;         // [x, y, z]            accel sensor measurements
+VectorInt16 aaReal;     // [x, y, z]            gravity-free accel sensor measurements
+VectorInt16 aaWorld;    // [x, y, z]            world-frame accel sensor measurements
+VectorFloat gravity;    // [x, y, z]            gravity vector
+float euler[3];         // [psi, theta, phi]    Euler angle container
+float ypr[3];           // [yaw, pitch, roll]   yaw/pitch/roll container and gravity vector
+
+// packet structure for InvenSense teapot demo
+uint8_t teapotPacket[14] = { '$', 0x02, 0,0, 0,0, 0,0, 0,0, 0x00, 0x00, '\r', '\n' };
+
+
+
+// ================================================================
+// ===               INTERRUPT DETECTION ROUTINE                ===
+// ================================================================
+
+volatile bool mpuInterrupt = false;     // indicates whether MPU interrupt pin has gone high
+void dmpDataReady() {
+    mpuInterrupt = true;
+}
+
+
+
+// ================================================================
+// ===                      INITIAL SETUP                       ===
+// ================================================================
+
+void setup() {
+    // join I2C bus (I2Cdev library doesn't do this automatically)
+    #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
+        Wire.begin();
+        TWBR = 24; // 400kHz I2C clock (200kHz if CPU is 8MHz)
+    #elif I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE
+        Fastwire::setup(400, true);
+    #endif
+
+    // initialize serial communication
+    // (115200 chosen because it is required for Teapot Demo output, but it's
+    // really up to you depending on your project)
+    Serial.begin(115200);
+    while (!Serial); // wait for Leonardo enumeration, others continue immediately
+
+    // NOTE: 8MHz or slower host processors, like the Teensy @ 3.3v or Ardunio
+    // Pro Mini running at 3.3v, cannot handle this baud rate reliably due to
+    // the baud timing being too misaligned with processor ticks. You must use
+    // 38400 or slower in these cases, or use some kind of external separate
+    // crystal solution for the UART timer.
+
+    // initialize device
+    Serial.println(F("Initializing I2C devices..."));
+    mpu.initialize();
+
+    // verify connection
+    Serial.println(F("Testing device connections..."));
+    Serial.println(mpu.testConnection() ? F("MPU6050 connection successful") : F("MPU6050 connection failed"));
+
+    // wait for ready
+    Serial.println(F("\nSend any character to begin DMP programming and demo: "));
+    while (Serial.available() && Serial.read()); // empty buffer
+    while (!Serial.available());                 // wait for data
+    while (Serial.available() && Serial.read()); // empty buffer again
+
+    // load and configure the DMP
+    Serial.println(F("Initializing DMP..."));
+    devStatus = mpu.dmpInitialize();
+
+    // supply your own gyro offsets here, scaled for min sensitivity
+    mpu.setXGyroOffset(220);
+    mpu.setYGyroOffset(76);
+    mpu.setZGyroOffset(-85);
+    mpu.setZAccelOffset(1788); // 1688 factory default for my test chip
+
+    // make sure it worked (returns 0 if so)
+    if (devStatus == 0) {
+        // turn on the DMP, now that it's ready
+        Serial.println(F("Enabling DMP..."));
+        mpu.setDMPEnabled(true);
+
+        // enable Arduino interrupt detection
+        Serial.println(F("Enabling interrupt detection (Arduino external interrupt 0)..."));
+        attachInterrupt(0, dmpDataReady, RISING);
+        mpuIntStatus = mpu.getIntStatus();
+
+        // set our DMP Ready flag so the main loop() function knows it's okay to use it
+        Serial.println(F("DMP ready! Waiting for first interrupt..."));
+        dmpReady = true;
+
+        // get expected DMP packet size for later comparison
+        packetSize = mpu.dmpGetFIFOPacketSize();
+    } else {
+        // ERROR!
+        // 1 = initial memory load failed
+        // 2 = DMP configuration updates failed
+        // (if it's going to break, usually the code will be 1)
+        Serial.print(F("DMP Initialization failed (code "));
+        Serial.print(devStatus);
+        Serial.println(F(")"));
+    }
+
+    // configure LED for output
+    pinMode(LED_PIN, OUTPUT);
+}
+
+
+
+// ================================================================
+// ===                    MAIN PROGRAM LOOP                     ===
+// ================================================================
+
+void loop() {
+    // if programming failed, don't try to do anything
+    if (!dmpReady) return;
+
+    // wait for MPU interrupt or extra packet(s) available
+    while (!mpuInterrupt && fifoCount < packetSize) {
+        // other program behavior stuff here
+        // .
+        // .
+        // .
+        // if you are really paranoid you can frequently test in between other
+        // stuff to see if mpuInterrupt is true, and if so, "break;" from the
+        // while() loop to immediately process the MPU data
+        // .
+        // .
+        // .
+    }
+
+    // reset interrupt flag and get INT_STATUS byte
+    mpuInterrupt = false;
+    mpuIntStatus = mpu.getIntStatus();
+
+    // get current FIFO count
+    fifoCount = mpu.getFIFOCount();
+
+    // check for overflow (this should never happen unless our code is too inefficient)
+    if ((mpuIntStatus & 0x10) || fifoCount == 1024) {
+        // reset so we can continue cleanly
+        mpu.resetFIFO();
+        Serial.println(F("FIFO overflow!"));
+
+    // otherwise, check for DMP data ready interrupt (this should happen frequently)
+    } else if (mpuIntStatus & 0x02) {
+        // wait for correct available data length, should be a VERY short wait
+        while (fifoCount < packetSize) fifoCount = mpu.getFIFOCount();
+
+        // read a packet from FIFO
+        mpu.getFIFOBytes(fifoBuffer, packetSize);
+        
+        // track FIFO count here in case there is > 1 packet available
+        // (this lets us immediately read more without waiting for an interrupt)
+        fifoCount -= packetSize;
+
+        #ifdef OUTPUT_READABLE_QUATERNION
+            // display quaternion values in easy matrix form: w x y z
+            mpu.dmpGetQuaternion(&q, fifoBuffer);
+            Serial.print("quat\t");
+            Serial.print(q.w);
+            Serial.print("\t");
+            Serial.print(q.x);
+            Serial.print("\t");
+            Serial.print(q.y);
+            Serial.print("\t");
+            Serial.println(q.z);
+        #endif
+
+        #ifdef OUTPUT_READABLE_EULER
+            // display Euler angles in degrees
+            mpu.dmpGetQuaternion(&q, fifoBuffer);
+            mpu.dmpGetEuler(euler, &q);
+            Serial.print("euler\t");
+            Serial.print(euler[0] * 180/M_PI);
+            Serial.print("\t");
+            Serial.print(euler[1] * 180/M_PI);
+            Serial.print("\t");
+            Serial.println(euler[2] * 180/M_PI);
+        #endif
+
+        #ifdef OUTPUT_READABLE_YAWPITCHROLL
+            // display Euler angles in degrees
+            mpu.dmpGetQuaternion(&q, fifoBuffer);
+            mpu.dmpGetGravity(&gravity, &q);
+            mpu.dmpGetYawPitchRoll(ypr, &q, &gravity);
+            Serial.print("ypr\t");
+            Serial.print(ypr[0] * 180/M_PI);
+            Serial.print("\t");
+            Serial.print(ypr[1] * 180/M_PI);
+            Serial.print("\t");
+            Serial.println(ypr[2] * 180/M_PI);
+        #endif
+
+        #ifdef OUTPUT_READABLE_REALACCEL
+            // display real acceleration, adjusted to remove gravity
+            mpu.dmpGetQuaternion(&q, fifoBuffer);
+            mpu.dmpGetAccel(&aa, fifoBuffer);
+            mpu.dmpGetGravity(&gravity, &q);
+            mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
+            Serial.print("areal\t");
+            Serial.print(aaReal.x);
+            Serial.print("\t");
+            Serial.print(aaReal.y);
+            Serial.print("\t");
+            Serial.println(aaReal.z);
+        #endif
+
+        #ifdef OUTPUT_READABLE_WORLDACCEL
+            // display initial world-frame acceleration, adjusted to remove gravity
+            // and rotated based on known orientation from quaternion
+            mpu.dmpGetQuaternion(&q, fifoBuffer);
+            mpu.dmpGetAccel(&aa, fifoBuffer);
+            mpu.dmpGetGravity(&gravity, &q);
+            mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
+            mpu.dmpGetLinearAccelInWorld(&aaWorld, &aaReal, &q);
+            Serial.print("aworld\t");
+            Serial.print(aaWorld.x);
+            Serial.print("\t");
+            Serial.print(aaWorld.y);
+            Serial.print("\t");
+            Serial.println(aaWorld.z);
+        #endif
+    
+        #ifdef OUTPUT_TEAPOT
+            // display quaternion values in InvenSense Teapot demo format:
+            teapotPacket[2] = fifoBuffer[0];
+            teapotPacket[3] = fifoBuffer[1];
+            teapotPacket[4] = fifoBuffer[4];
+            teapotPacket[5] = fifoBuffer[5];
+            teapotPacket[6] = fifoBuffer[8];
+            teapotPacket[7] = fifoBuffer[9];
+            teapotPacket[8] = fifoBuffer[12];
+            teapotPacket[9] = fifoBuffer[13];
+            Serial.write(teapotPacket, 14);
+            teapotPacket[11]++; // packetCount, loops at 0xFF on purpose
+        #endif
+
+        // blink LED to indicate activity
+        blinkState = !blinkState;
+        digitalWrite(LED_PIN, blinkState);
+    }
+}

libraries/MPU6050/Examples/MPU6050_DMP6/Processing/MPUTeapot/MPUTeapot.pde

@@ -0,0 +1,247 @@
+// I2C device class (I2Cdev) demonstration Processing sketch for MPU6050 DMP output
+// 6/20/2012 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//     2012-06-20 - initial release
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2012 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+import processing.serial.*;
+import processing.opengl.*;
+import toxi.geom.*;
+import toxi.processing.*;
+
+// NOTE: requires ToxicLibs to be installed in order to run properly.
+// 1. Download from http://toxiclibs.org/downloads
+// 2. Extract into [userdir]/Processing/libraries
+//    (location may be different on Mac/Linux)
+// 3. Run and bask in awesomeness
+
+ToxiclibsSupport gfx;
+
+Serial port;                         // The serial port
+char[] teapotPacket = new char[14];  // InvenSense Teapot packet
+int serialCount = 0;                 // current packet byte position
+int aligned = 0;
+int interval = 0;
+
+float[] q = new float[4];
+Quaternion quat = new Quaternion(1, 0, 0, 0);
+
+float[] gravity = new float[3];
+float[] euler = new float[3];
+float[] ypr = new float[3];
+
+void setup() {
+    // 300px square viewport using OpenGL rendering
+    size(300, 300, OPENGL);
+    gfx = new ToxiclibsSupport(this);
+
+    // setup lights and antialiasing
+    lights();
+    smooth();
+  
+    // display serial port list for debugging/clarity
+    println(Serial.list());
+
+    // get the first available port (use EITHER this OR the specific port code below)
+    String portName = "/dev/ttyUSB1";
+    
+    // get a specific serial port (use EITHER this OR the first-available code above)
+    //String portName = "COM4";
+    
+    // open the serial port
+    port = new Serial(this, portName, 115200);
+    
+    // send single character to trigger DMP init/start
+    // (expected by MPU6050_DMP6 example Arduino sketch)
+    port.write('r');
+}
+
+void draw() {
+    if (millis() - interval > 1000) {
+        // resend single character to trigger DMP init/start
+        // in case the MPU is halted/reset while applet is running
+        port.write('r');
+        interval = millis();
+    }
+    
+    // black background
+    background(0);
+    
+    // translate everything to the middle of the viewport
+    pushMatrix();
+    translate(width / 2, height / 2);
+
+    // 3-step rotation from yaw/pitch/roll angles (gimbal lock!)
+    // ...and other weirdness I haven't figured out yet
+    //rotateY(-ypr[0]);
+    //rotateZ(-ypr[1]);
+    //rotateX(-ypr[2]);
+
+    // toxiclibs direct angle/axis rotation from quaternion (NO gimbal lock!)
+    // (axis order [1, 3, 2] and inversion [-1, +1, +1] is a consequence of
+    // different coordinate system orientation assumptions between Processing
+    // and InvenSense DMP)
+    float[] axis = quat.toAxisAngle();
+    rotate(axis[0], -axis[1], axis[3], axis[2]);
+
+    // draw main body in red
+    fill(255, 0, 0, 200);
+    box(10, 10, 200);
+    
+    // draw front-facing tip in blue
+    fill(0, 0, 255, 200);
+    pushMatrix();
+    translate(0, 0, -120);
+    rotateX(PI/2);
+    drawCylinder(0, 20, 20, 8);
+    popMatrix();
+    
+    // draw wings and tail fin in green
+    fill(0, 255, 0, 200);
+    beginShape(TRIANGLES);
+    vertex(-100,  2, 30); vertex(0,  2, -80); vertex(100,  2, 30);  // wing top layer
+    vertex(-100, -2, 30); vertex(0, -2, -80); vertex(100, -2, 30);  // wing bottom layer
+    vertex(-2, 0, 98); vertex(-2, -30, 98); vertex(-2, 0, 70);  // tail left layer
+    vertex( 2, 0, 98); vertex( 2, -30, 98); vertex( 2, 0, 70);  // tail right layer
+    endShape();
+    beginShape(QUADS);
+    vertex(-100, 2, 30); vertex(-100, -2, 30); vertex(  0, -2, -80); vertex(  0, 2, -80);
+    vertex( 100, 2, 30); vertex( 100, -2, 30); vertex(  0, -2, -80); vertex(  0, 2, -80);
+    vertex(-100, 2, 30); vertex(-100, -2, 30); vertex(100, -2,  30); vertex(100, 2,  30);
+    vertex(-2,   0, 98); vertex(2,   0, 98); vertex(2, -30, 98); vertex(-2, -30, 98);
+    vertex(-2,   0, 98); vertex(2,   0, 98); vertex(2,   0, 70); vertex(-2,   0, 70);
+    vertex(-2, -30, 98); vertex(2, -30, 98); vertex(2,   0, 70); vertex(-2,   0, 70);
+    endShape();
+    
+    popMatrix();
+}
+
+void serialEvent(Serial port) {
+    interval = millis();
+    while (port.available() > 0) {
+        int ch = port.read();
+        print((char)ch);
+        if (ch == '$') {serialCount = 0;} // this will help with alignment
+        if (aligned < 4) {
+            // make sure we are properly aligned on a 14-byte packet
+            if (serialCount == 0) {
+                if (ch == '$') aligned++; else aligned = 0;
+            } else if (serialCount == 1) {
+                if (ch == 2) aligned++; else aligned = 0;
+            } else if (serialCount == 12) {
+                if (ch == '\r') aligned++; else aligned = 0;
+            } else if (serialCount == 13) {
+                if (ch == '\n') aligned++; else aligned = 0;
+            }
+            //println(ch + " " + aligned + " " + serialCount);
+            serialCount++;
+            if (serialCount == 14) serialCount = 0;
+        } else {
+            if (serialCount > 0 || ch == '$') {
+                teapotPacket[serialCount++] = (char)ch;
+                if (serialCount == 14) {
+                    serialCount = 0; // restart packet byte position
+                    
+                    // get quaternion from data packet
+                    q[0] = ((teapotPacket[2] << 8) | teapotPacket[3]) / 16384.0f;
+                    q[1] = ((teapotPacket[4] << 8) | teapotPacket[5]) / 16384.0f;
+                    q[2] = ((teapotPacket[6] << 8) | teapotPacket[7]) / 16384.0f;
+                    q[3] = ((teapotPacket[8] << 8) | teapotPacket[9]) / 16384.0f;
+                    for (int i = 0; i < 4; i++) if (q[i] >= 2) q[i] = -4 + q[i];
+                    
+                    // set our toxilibs quaternion to new data
+                    quat.set(q[0], q[1], q[2], q[3]);
+
+                    /*
+                    // below calculations unnecessary for orientation only using toxilibs
+                    
+                    // calculate gravity vector
+                    gravity[0] = 2 * (q[1]*q[3] - q[0]*q[2]);
+                    gravity[1] = 2 * (q[0]*q[1] + q[2]*q[3]);
+                    gravity[2] = q[0]*q[0] - q[1]*q[1] - q[2]*q[2] + q[3]*q[3];
+        
+                    // calculate Euler angles
+                    euler[0] = atan2(2*q[1]*q[2] - 2*q[0]*q[3], 2*q[0]*q[0] + 2*q[1]*q[1] - 1);
+                    euler[1] = -asin(2*q[1]*q[3] + 2*q[0]*q[2]);
+                    euler[2] = atan2(2*q[2]*q[3] - 2*q[0]*q[1], 2*q[0]*q[0] + 2*q[3]*q[3] - 1);
+        
+                    // calculate yaw/pitch/roll angles
+                    ypr[0] = atan2(2*q[1]*q[2] - 2*q[0]*q[3], 2*q[0]*q[0] + 2*q[1]*q[1] - 1);
+                    ypr[1] = atan(gravity[0] / sqrt(gravity[1]*gravity[1] + gravity[2]*gravity[2]));
+                    ypr[2] = atan(gravity[1] / sqrt(gravity[0]*gravity[0] + gravity[2]*gravity[2]));
+        
+                    // output various components for debugging
+                    //println("q:\t" + round(q[0]*100.0f)/100.0f + "\t" + round(q[1]*100.0f)/100.0f + "\t" + round(q[2]*100.0f)/100.0f + "\t" + round(q[3]*100.0f)/100.0f);
+                    //println("euler:\t" + euler[0]*180.0f/PI + "\t" + euler[1]*180.0f/PI + "\t" + euler[2]*180.0f/PI);
+                    //println("ypr:\t" + ypr[0]*180.0f/PI + "\t" + ypr[1]*180.0f/PI + "\t" + ypr[2]*180.0f/PI);
+                    */
+                }
+            }
+        }
+    }
+}
+
+void drawCylinder(float topRadius, float bottomRadius, float tall, int sides) {
+    float angle = 0;
+    float angleIncrement = TWO_PI / sides;
+    beginShape(QUAD_STRIP);
+    for (int i = 0; i < sides + 1; ++i) {
+        vertex(topRadius*cos(angle), 0, topRadius*sin(angle));
+        vertex(bottomRadius*cos(angle), tall, bottomRadius*sin(angle));
+        angle += angleIncrement;
+    }
+    endShape();
+    
+    // If it is not a cone, draw the circular top cap
+    if (topRadius != 0) {
+        angle = 0;
+        beginShape(TRIANGLE_FAN);
+        
+        // Center point
+        vertex(0, 0, 0);
+        for (int i = 0; i < sides + 1; i++) {
+            vertex(topRadius * cos(angle), 0, topRadius * sin(angle));
+            angle += angleIncrement;
+        }
+        endShape();
+    }
+  
+    // If it is not a cone, draw the circular bottom cap
+    if (bottomRadius != 0) {
+        angle = 0;
+        beginShape(TRIANGLE_FAN);
+    
+        // Center point
+        vertex(0, tall, 0);
+        for (int i = 0; i < sides + 1; i++) {
+            vertex(bottomRadius * cos(angle), tall, bottomRadius * sin(angle));
+            angle += angleIncrement;
+        }
+        endShape();
+    }
+}

libraries/MPU6050/Examples/MPU6050_raw/MPU6050_raw.ino

@@ -0,0 +1,151 @@
+// I2C device class (I2Cdev) demonstration Arduino sketch for MPU6050 class
+// 10/7/2011 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//      2013-05-08 - added multiple output formats
+//                 - added seamless Fastwire support
+//      2011-10-07 - initial release
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2011 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+// I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files
+// for both classes must be in the include path of your project
+#include "I2Cdev.h"
+#include "MPU6050.h"
+
+// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation
+// is used in I2Cdev.h
+#if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
+    #include "Wire.h"
+#endif
+
+// class default I2C address is 0x68
+// specific I2C addresses may be passed as a parameter here
+// AD0 low = 0x68 (default for InvenSense evaluation board)
+// AD0 high = 0x69
+MPU6050 accelgyro;
+//MPU6050 accelgyro(0x69); // <-- use for AD0 high
+
+int16_t ax, ay, az;
+int16_t gx, gy, gz;
+
+
+
+// uncomment "OUTPUT_READABLE_ACCELGYRO" if you want to see a tab-separated
+// list of the accel X/Y/Z and then gyro X/Y/Z values in decimal. Easy to read,
+// not so easy to parse, and slow(er) over UART.
+#define OUTPUT_READABLE_ACCELGYRO
+
+// uncomment "OUTPUT_BINARY_ACCELGYRO" to send all 6 axes of data as 16-bit
+// binary, one right after the other. This is very fast (as fast as possible
+// without compression or data loss), and easy to parse, but impossible to read
+// for a human.
+//#define OUTPUT_BINARY_ACCELGYRO
+
+
+#define LED_PIN 13
+bool blinkState = false;
+
+void setup() {
+    // join I2C bus (I2Cdev library doesn't do this automatically)
+    #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
+        Wire.begin();
+    #elif I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE
+        Fastwire::setup(400, true);
+    #endif
+
+    // initialize serial communication
+    // (38400 chosen because it works as well at 8MHz as it does at 16MHz, but
+    // it's really up to you depending on your project)
+    Serial.begin(38400);
+
+    // initialize device
+    Serial.println("Initializing I2C devices...");
+    accelgyro.initialize();
+
+    // verify connection
+    Serial.println("Testing device connections...");
+    Serial.println(accelgyro.testConnection() ? "MPU6050 connection successful" : "MPU6050 connection failed");
+
+    // use the code below to change accel/gyro offset values
+    /*
+    Serial.println("Updating internal sensor offsets...");
+    // -76	-2359	1688	0	0	0
+    Serial.print(accelgyro.getXAccelOffset()); Serial.print("\t"); // -76
+    Serial.print(accelgyro.getYAccelOffset()); Serial.print("\t"); // -2359
+    Serial.print(accelgyro.getZAccelOffset()); Serial.print("\t"); // 1688
+    Serial.print(accelgyro.getXGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getYGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getZGyroOffset()); Serial.print("\t"); // 0
+    Serial.print("\n");
+    accelgyro.setXGyroOffset(220);
+    accelgyro.setYGyroOffset(76);
+    accelgyro.setZGyroOffset(-85);
+    Serial.print(accelgyro.getXAccelOffset()); Serial.print("\t"); // -76
+    Serial.print(accelgyro.getYAccelOffset()); Serial.print("\t"); // -2359
+    Serial.print(accelgyro.getZAccelOffset()); Serial.print("\t"); // 1688
+    Serial.print(accelgyro.getXGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getYGyroOffset()); Serial.print("\t"); // 0
+    Serial.print(accelgyro.getZGyroOffset()); Serial.print("\t"); // 0
+    Serial.print("\n");
+    */
+
+    // configure Arduino LED for
+    pinMode(LED_PIN, OUTPUT);
+}
+
+void loop() {
+    // read raw accel/gyro measurements from device
+    accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);
+
+    // these methods (and a few others) are also available
+    //accelgyro.getAcceleration(&ax, &ay, &az);
+    //accelgyro.getRotation(&gx, &gy, &gz);
+
+    #ifdef OUTPUT_READABLE_ACCELGYRO
+        // display tab-separated accel/gyro x/y/z values
+        Serial.print("a/g:\t");
+        Serial.print(ax); Serial.print("\t");
+        Serial.print(ay); Serial.print("\t");
+        Serial.print(az); Serial.print("\t");
+        Serial.print(gx); Serial.print("\t");
+        Serial.print(gy); Serial.print("\t");
+        Serial.println(gz);
+    #endif
+
+    #ifdef OUTPUT_BINARY_ACCELGYRO
+        Serial.write((uint8_t)(ax >> 8)); Serial.write((uint8_t)(ax & 0xFF));
+        Serial.write((uint8_t)(ay >> 8)); Serial.write((uint8_t)(ay & 0xFF));
+        Serial.write((uint8_t)(az >> 8)); Serial.write((uint8_t)(az & 0xFF));
+        Serial.write((uint8_t)(gx >> 8)); Serial.write((uint8_t)(gx & 0xFF));
+        Serial.write((uint8_t)(gy >> 8)); Serial.write((uint8_t)(gy & 0xFF));
+        Serial.write((uint8_t)(gz >> 8)); Serial.write((uint8_t)(gz & 0xFF));
+    #endif
+
+    // blink LED to indicate activity
+    blinkState = !blinkState;
+    digitalWrite(LED_PIN, blinkState);
+}

libraries/MPU6050/MPU6050.h

@@ -0,0 +1,987 @@
+// I2Cdev library collection - MPU6050 I2C device class
+// Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00)
+// 10/3/2011 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//     ... - ongoing debug release
+
+// NOTE: THIS IS ONLY A PARIAL RELEASE. THIS DEVICE CLASS IS CURRENTLY UNDERGOING ACTIVE
+// DEVELOPMENT AND IS STILL MISSING SOME IMPORTANT FEATURES. PLEASE KEEP THIS IN MIND IF
+// YOU DECIDE TO USE THIS PARTICULAR CODE FOR ANYTHING.
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2012 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+#ifndef _MPU6050_H_
+#define _MPU6050_H_
+
+#include "I2Cdev.h"
+//#include <avr/pgmspace.h>
+
+
+
+#define MPU6050_ADDRESS_AD0_LOW     0x68 // address pin low (GND), default for InvenSense evaluation board
+#define MPU6050_ADDRESS_AD0_HIGH    0x69 // address pin high (VCC)
+#define MPU6050_DEFAULT_ADDRESS     MPU6050_ADDRESS_AD0_LOW
+
+#define MPU6050_RA_XG_OFFS_TC       0x00 //[7] PWR_MODE, [6:1] XG_OFFS_TC, [0] OTP_BNK_VLD
+#define MPU6050_RA_YG_OFFS_TC       0x01 //[7] PWR_MODE, [6:1] YG_OFFS_TC, [0] OTP_BNK_VLD
+#define MPU6050_RA_ZG_OFFS_TC       0x02 //[7] PWR_MODE, [6:1] ZG_OFFS_TC, [0] OTP_BNK_VLD
+#define MPU6050_RA_X_FINE_GAIN      0x03 //[7:0] X_FINE_GAIN
+#define MPU6050_RA_Y_FINE_GAIN      0x04 //[7:0] Y_FINE_GAIN
+#define MPU6050_RA_Z_FINE_GAIN      0x05 //[7:0] Z_FINE_GAIN
+#define MPU6050_RA_XA_OFFS_H        0x06 //[15:0] XA_OFFS
+#define MPU6050_RA_XA_OFFS_L_TC     0x07
+#define MPU6050_RA_YA_OFFS_H        0x08 //[15:0] YA_OFFS
+#define MPU6050_RA_YA_OFFS_L_TC     0x09
+#define MPU6050_RA_ZA_OFFS_H        0x0A //[15:0] ZA_OFFS
+#define MPU6050_RA_ZA_OFFS_L_TC     0x0B
+#define MPU6050_RA_XG_OFFS_USRH     0x13 //[15:0] XG_OFFS_USR
+#define MPU6050_RA_XG_OFFS_USRL     0x14
+#define MPU6050_RA_YG_OFFS_USRH     0x15 //[15:0] YG_OFFS_USR
+#define MPU6050_RA_YG_OFFS_USRL     0x16
+#define MPU6050_RA_ZG_OFFS_USRH     0x17 //[15:0] ZG_OFFS_USR
+#define MPU6050_RA_ZG_OFFS_USRL     0x18
+#define MPU6050_RA_SMPLRT_DIV       0x19
+#define MPU6050_RA_CONFIG           0x1A
+#define MPU6050_RA_GYRO_CONFIG      0x1B
+#define MPU6050_RA_ACCEL_CONFIG     0x1C
+#define MPU6050_RA_FF_THR           0x1D
+#define MPU6050_RA_FF_DUR           0x1E
+#define MPU6050_RA_MOT_THR          0x1F
+#define MPU6050_RA_MOT_DUR          0x20
+#define MPU6050_RA_ZRMOT_THR        0x21
+#define MPU6050_RA_ZRMOT_DUR        0x22
+#define MPU6050_RA_FIFO_EN          0x23
+#define MPU6050_RA_I2C_MST_CTRL     0x24
+#define MPU6050_RA_I2C_SLV0_ADDR    0x25
+#define MPU6050_RA_I2C_SLV0_REG     0x26
+#define MPU6050_RA_I2C_SLV0_CTRL    0x27
+#define MPU6050_RA_I2C_SLV1_ADDR    0x28
+#define MPU6050_RA_I2C_SLV1_REG     0x29
+#define MPU6050_RA_I2C_SLV1_CTRL    0x2A
+#define MPU6050_RA_I2C_SLV2_ADDR    0x2B
+#define MPU6050_RA_I2C_SLV2_REG     0x2C
+#define MPU6050_RA_I2C_SLV2_CTRL    0x2D
+#define MPU6050_RA_I2C_SLV3_ADDR    0x2E
+#define MPU6050_RA_I2C_SLV3_REG     0x2F
+#define MPU6050_RA_I2C_SLV3_CTRL    0x30
+#define MPU6050_RA_I2C_SLV4_ADDR    0x31
+#define MPU6050_RA_I2C_SLV4_REG     0x32
+#define MPU6050_RA_I2C_SLV4_DO      0x33
+#define MPU6050_RA_I2C_SLV4_CTRL    0x34
+#define MPU6050_RA_I2C_SLV4_DI      0x35
+#define MPU6050_RA_I2C_MST_STATUS   0x36
+#define MPU6050_RA_INT_PIN_CFG      0x37
+#define MPU6050_RA_INT_ENABLE       0x38
+#define MPU6050_RA_DMP_INT_STATUS   0x39
+#define MPU6050_RA_INT_STATUS       0x3A
+#define MPU6050_RA_ACCEL_XOUT_H     0x3B
+#define MPU6050_RA_ACCEL_XOUT_L     0x3C
+#define MPU6050_RA_ACCEL_YOUT_H     0x3D
+#define MPU6050_RA_ACCEL_YOUT_L     0x3E
+#define MPU6050_RA_ACCEL_ZOUT_H     0x3F
+#define MPU6050_RA_ACCEL_ZOUT_L     0x40
+#define MPU6050_RA_TEMP_OUT_H       0x41
+#define MPU6050_RA_TEMP_OUT_L       0x42
+#define MPU6050_RA_GYRO_XOUT_H      0x43
+#define MPU6050_RA_GYRO_XOUT_L      0x44
+#define MPU6050_RA_GYRO_YOUT_H      0x45
+#define MPU6050_RA_GYRO_YOUT_L      0x46
+#define MPU6050_RA_GYRO_ZOUT_H      0x47
+#define MPU6050_RA_GYRO_ZOUT_L      0x48
+#define MPU6050_RA_EXT_SENS_DATA_00 0x49
+#define MPU6050_RA_EXT_SENS_DATA_01 0x4A
+#define MPU6050_RA_EXT_SENS_DATA_02 0x4B
+#define MPU6050_RA_EXT_SENS_DATA_03 0x4C
+#define MPU6050_RA_EXT_SENS_DATA_04 0x4D
+#define MPU6050_RA_EXT_SENS_DATA_05 0x4E
+#define MPU6050_RA_EXT_SENS_DATA_06 0x4F
+#define MPU6050_RA_EXT_SENS_DATA_07 0x50
+#define MPU6050_RA_EXT_SENS_DATA_08 0x51
+#define MPU6050_RA_EXT_SENS_DATA_09 0x52
+#define MPU6050_RA_EXT_SENS_DATA_10 0x53
+#define MPU6050_RA_EXT_SENS_DATA_11 0x54
+#define MPU6050_RA_EXT_SENS_DATA_12 0x55
+#define MPU6050_RA_EXT_SENS_DATA_13 0x56
+#define MPU6050_RA_EXT_SENS_DATA_14 0x57
+#define MPU6050_RA_EXT_SENS_DATA_15 0x58
+#define MPU6050_RA_EXT_SENS_DATA_16 0x59
+#define MPU6050_RA_EXT_SENS_DATA_17 0x5A
+#define MPU6050_RA_EXT_SENS_DATA_18 0x5B
+#define MPU6050_RA_EXT_SENS_DATA_19 0x5C
+#define MPU6050_RA_EXT_SENS_DATA_20 0x5D
+#define MPU6050_RA_EXT_SENS_DATA_21 0x5E
+#define MPU6050_RA_EXT_SENS_DATA_22 0x5F
+#define MPU6050_RA_EXT_SENS_DATA_23 0x60
+#define MPU6050_RA_MOT_DETECT_STATUS    0x61
+#define MPU6050_RA_I2C_SLV0_DO      0x63
+#define MPU6050_RA_I2C_SLV1_DO      0x64
+#define MPU6050_RA_I2C_SLV2_DO      0x65
+#define MPU6050_RA_I2C_SLV3_DO      0x66
+#define MPU6050_RA_I2C_MST_DELAY_CTRL   0x67
+#define MPU6050_RA_SIGNAL_PATH_RESET    0x68
+#define MPU6050_RA_MOT_DETECT_CTRL      0x69
+#define MPU6050_RA_USER_CTRL        0x6A
+#define MPU6050_RA_PWR_MGMT_1       0x6B
+#define MPU6050_RA_PWR_MGMT_2       0x6C
+#define MPU6050_RA_BANK_SEL         0x6D
+#define MPU6050_RA_MEM_START_ADDR   0x6E
+#define MPU6050_RA_MEM_R_W          0x6F
+#define MPU6050_RA_DMP_CFG_1        0x70
+#define MPU6050_RA_DMP_CFG_2        0x71
+#define MPU6050_RA_FIFO_COUNTH      0x72
+#define MPU6050_RA_FIFO_COUNTL      0x73
+#define MPU6050_RA_FIFO_R_W         0x74
+#define MPU6050_RA_WHO_AM_I         0x75
+
+#define MPU6050_TC_PWR_MODE_BIT     7
+#define MPU6050_TC_OFFSET_BIT       6
+#define MPU6050_TC_OFFSET_LENGTH    6
+#define MPU6050_TC_OTP_BNK_VLD_BIT  0
+
+#define MPU6050_VDDIO_LEVEL_VLOGIC  0
+#define MPU6050_VDDIO_LEVEL_VDD     1
+
+#define MPU6050_CFG_EXT_SYNC_SET_BIT    5
+#define MPU6050_CFG_EXT_SYNC_SET_LENGTH 3
+#define MPU6050_CFG_DLPF_CFG_BIT    2
+#define MPU6050_CFG_DLPF_CFG_LENGTH 3
+
+#define MPU6050_EXT_SYNC_DISABLED       0x0
+#define MPU6050_EXT_SYNC_TEMP_OUT_L     0x1
+#define MPU6050_EXT_SYNC_GYRO_XOUT_L    0x2
+#define MPU6050_EXT_SYNC_GYRO_YOUT_L    0x3
+#define MPU6050_EXT_SYNC_GYRO_ZOUT_L    0x4
+#define MPU6050_EXT_SYNC_ACCEL_XOUT_L   0x5
+#define MPU6050_EXT_SYNC_ACCEL_YOUT_L   0x6
+#define MPU6050_EXT_SYNC_ACCEL_ZOUT_L   0x7
+
+#define MPU6050_DLPF_BW_256         0x00
+#define MPU6050_DLPF_BW_188         0x01
+#define MPU6050_DLPF_BW_98          0x02
+#define MPU6050_DLPF_BW_42          0x03
+#define MPU6050_DLPF_BW_20          0x04
+#define MPU6050_DLPF_BW_10          0x05
+#define MPU6050_DLPF_BW_5           0x06
+
+#define MPU6050_GCONFIG_FS_SEL_BIT      4
+#define MPU6050_GCONFIG_FS_SEL_LENGTH   2
+
+#define MPU6050_GYRO_FS_250         0x00
+#define MPU6050_GYRO_FS_500         0x01
+#define MPU6050_GYRO_FS_1000        0x02
+#define MPU6050_GYRO_FS_2000        0x03
+
+#define MPU6050_ACONFIG_XA_ST_BIT           7
+#define MPU6050_ACONFIG_YA_ST_BIT           6
+#define MPU6050_ACONFIG_ZA_ST_BIT           5
+#define MPU6050_ACONFIG_AFS_SEL_BIT         4
+#define MPU6050_ACONFIG_AFS_SEL_LENGTH      2
+#define MPU6050_ACONFIG_ACCEL_HPF_BIT       2
+#define MPU6050_ACONFIG_ACCEL_HPF_LENGTH    3
+
+#define MPU6050_ACCEL_FS_2          0x00
+#define MPU6050_ACCEL_FS_4          0x01
+#define MPU6050_ACCEL_FS_8          0x02
+#define MPU6050_ACCEL_FS_16         0x03
+
+#define MPU6050_DHPF_RESET          0x00
+#define MPU6050_DHPF_5              0x01
+#define MPU6050_DHPF_2P5            0x02
+#define MPU6050_DHPF_1P25           0x03
+#define MPU6050_DHPF_0P63           0x04
+#define MPU6050_DHPF_HOLD           0x07
+
+#define MPU6050_TEMP_FIFO_EN_BIT    7
+#define MPU6050_XG_FIFO_EN_BIT      6
+#define MPU6050_YG_FIFO_EN_BIT      5
+#define MPU6050_ZG_FIFO_EN_BIT      4
+#define MPU6050_ACCEL_FIFO_EN_BIT   3
+#define MPU6050_SLV2_FIFO_EN_BIT    2
+#define MPU6050_SLV1_FIFO_EN_BIT    1
+#define MPU6050_SLV0_FIFO_EN_BIT    0
+
+#define MPU6050_MULT_MST_EN_BIT     7
+#define MPU6050_WAIT_FOR_ES_BIT     6
+#define MPU6050_SLV_3_FIFO_EN_BIT   5
+#define MPU6050_I2C_MST_P_NSR_BIT   4
+#define MPU6050_I2C_MST_CLK_BIT     3
+#define MPU6050_I2C_MST_CLK_LENGTH  4
+
+#define MPU6050_CLOCK_DIV_348       0x0
+#define MPU6050_CLOCK_DIV_333       0x1
+#define MPU6050_CLOCK_DIV_320       0x2
+#define MPU6050_CLOCK_DIV_308       0x3
+#define MPU6050_CLOCK_DIV_296       0x4
+#define MPU6050_CLOCK_DIV_286       0x5
+#define MPU6050_CLOCK_DIV_276       0x6
+#define MPU6050_CLOCK_DIV_267       0x7
+#define MPU6050_CLOCK_DIV_258       0x8
+#define MPU6050_CLOCK_DIV_500       0x9
+#define MPU6050_CLOCK_DIV_471       0xA
+#define MPU6050_CLOCK_DIV_444       0xB
+#define MPU6050_CLOCK_DIV_421       0xC
+#define MPU6050_CLOCK_DIV_400       0xD
+#define MPU6050_CLOCK_DIV_381       0xE
+#define MPU6050_CLOCK_DIV_364       0xF
+
+#define MPU6050_I2C_SLV_RW_BIT      7
+#define MPU6050_I2C_SLV_ADDR_BIT    6
+#define MPU6050_I2C_SLV_ADDR_LENGTH 7
+#define MPU6050_I2C_SLV_EN_BIT      7
+#define MPU6050_I2C_SLV_BYTE_SW_BIT 6
+#define MPU6050_I2C_SLV_REG_DIS_BIT 5
+#define MPU6050_I2C_SLV_GRP_BIT     4
+#define MPU6050_I2C_SLV_LEN_BIT     3
+#define MPU6050_I2C_SLV_LEN_LENGTH  4
+
+#define MPU6050_I2C_SLV4_RW_BIT         7
+#define MPU6050_I2C_SLV4_ADDR_BIT       6
+#define MPU6050_I2C_SLV4_ADDR_LENGTH    7
+#define MPU6050_I2C_SLV4_EN_BIT         7
+#define MPU6050_I2C_SLV4_INT_EN_BIT     6
+#define MPU6050_I2C_SLV4_REG_DIS_BIT    5
+#define MPU6050_I2C_SLV4_MST_DLY_BIT    4
+#define MPU6050_I2C_SLV4_MST_DLY_LENGTH 5
+
+#define MPU6050_MST_PASS_THROUGH_BIT    7
+#define MPU6050_MST_I2C_SLV4_DONE_BIT   6
+#define MPU6050_MST_I2C_LOST_ARB_BIT    5
+#define MPU6050_MST_I2C_SLV4_NACK_BIT   4
+#define MPU6050_MST_I2C_SLV3_NACK_BIT   3
+#define MPU6050_MST_I2C_SLV2_NACK_BIT   2
+#define MPU6050_MST_I2C_SLV1_NACK_BIT   1
+#define MPU6050_MST_I2C_SLV0_NACK_BIT   0
+
+#define MPU6050_INTCFG_INT_LEVEL_BIT        7
+#define MPU6050_INTCFG_INT_OPEN_BIT         6
+#define MPU6050_INTCFG_LATCH_INT_EN_BIT     5
+#define MPU6050_INTCFG_INT_RD_CLEAR_BIT     4
+#define MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT  3
+#define MPU6050_INTCFG_FSYNC_INT_EN_BIT     2
+#define MPU6050_INTCFG_I2C_BYPASS_EN_BIT    1
+#define MPU6050_INTCFG_CLKOUT_EN_BIT        0
+
+#define MPU6050_INTMODE_ACTIVEHIGH  0x00
+#define MPU6050_INTMODE_ACTIVELOW   0x01
+
+#define MPU6050_INTDRV_PUSHPULL     0x00
+#define MPU6050_INTDRV_OPENDRAIN    0x01
+
+#define MPU6050_INTLATCH_50USPULSE  0x00
+#define MPU6050_INTLATCH_WAITCLEAR  0x01
+
+#define MPU6050_INTCLEAR_STATUSREAD 0x00
+#define MPU6050_INTCLEAR_ANYREAD    0x01
+
+#define MPU6050_INTERRUPT_FF_BIT            7
+#define MPU6050_INTERRUPT_MOT_BIT           6
+#define MPU6050_INTERRUPT_ZMOT_BIT          5
+#define MPU6050_INTERRUPT_FIFO_OFLOW_BIT    4
+#define MPU6050_INTERRUPT_I2C_MST_INT_BIT   3
+#define MPU6050_INTERRUPT_PLL_RDY_INT_BIT   2
+#define MPU6050_INTERRUPT_DMP_INT_BIT       1
+#define MPU6050_INTERRUPT_DATA_RDY_BIT      0
+
+// TODO: figure out what these actually do
+// UMPL source code is not very obivous
+#define MPU6050_DMPINT_5_BIT            5
+#define MPU6050_DMPINT_4_BIT            4
+#define MPU6050_DMPINT_3_BIT            3
+#define MPU6050_DMPINT_2_BIT            2
+#define MPU6050_DMPINT_1_BIT            1
+#define MPU6050_DMPINT_0_BIT            0
+
+#define MPU6050_MOTION_MOT_XNEG_BIT     7
+#define MPU6050_MOTION_MOT_XPOS_BIT     6
+#define MPU6050_MOTION_MOT_YNEG_BIT     5
+#define MPU6050_MOTION_MOT_YPOS_BIT     4
+#define MPU6050_MOTION_MOT_ZNEG_BIT     3
+#define MPU6050_MOTION_MOT_ZPOS_BIT     2
+#define MPU6050_MOTION_MOT_ZRMOT_BIT    0
+
+#define MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT   7
+#define MPU6050_DELAYCTRL_I2C_SLV4_DLY_EN_BIT   4
+#define MPU6050_DELAYCTRL_I2C_SLV3_DLY_EN_BIT   3
+#define MPU6050_DELAYCTRL_I2C_SLV2_DLY_EN_BIT   2
+#define MPU6050_DELAYCTRL_I2C_SLV1_DLY_EN_BIT   1
+#define MPU6050_DELAYCTRL_I2C_SLV0_DLY_EN_BIT   0
+
+#define MPU6050_PATHRESET_GYRO_RESET_BIT    2
+#define MPU6050_PATHRESET_ACCEL_RESET_BIT   1
+#define MPU6050_PATHRESET_TEMP_RESET_BIT    0
+
+#define MPU6050_DETECT_ACCEL_ON_DELAY_BIT       5
+#define MPU6050_DETECT_ACCEL_ON_DELAY_LENGTH    2
+#define MPU6050_DETECT_FF_COUNT_BIT             3
+#define MPU6050_DETECT_FF_COUNT_LENGTH          2
+#define MPU6050_DETECT_MOT_COUNT_BIT            1
+#define MPU6050_DETECT_MOT_COUNT_LENGTH         2
+
+#define MPU6050_DETECT_DECREMENT_RESET  0x0
+#define MPU6050_DETECT_DECREMENT_1      0x1
+#define MPU6050_DETECT_DECREMENT_2      0x2
+#define MPU6050_DETECT_DECREMENT_4      0x3
+
+#define MPU6050_USERCTRL_DMP_EN_BIT             7
+#define MPU6050_USERCTRL_FIFO_EN_BIT            6
+#define MPU6050_USERCTRL_I2C_MST_EN_BIT         5
+#define MPU6050_USERCTRL_I2C_IF_DIS_BIT         4
+#define MPU6050_USERCTRL_DMP_RESET_BIT          3
+#define MPU6050_USERCTRL_FIFO_RESET_BIT         2
+#define MPU6050_USERCTRL_I2C_MST_RESET_BIT      1
+#define MPU6050_USERCTRL_SIG_COND_RESET_BIT     0
+
+#define MPU6050_PWR1_DEVICE_RESET_BIT   7
+#define MPU6050_PWR1_SLEEP_BIT          6
+#define MPU6050_PWR1_CYCLE_BIT          5
+#define MPU6050_PWR1_TEMP_DIS_BIT       3
+#define MPU6050_PWR1_CLKSEL_BIT         2
+#define MPU6050_PWR1_CLKSEL_LENGTH      3
+
+#define MPU6050_CLOCK_INTERNAL          0x00
+#define MPU6050_CLOCK_PLL_XGYRO         0x01
+#define MPU6050_CLOCK_PLL_YGYRO         0x02
+#define MPU6050_CLOCK_PLL_ZGYRO         0x03
+#define MPU6050_CLOCK_PLL_EXT32K        0x04
+#define MPU6050_CLOCK_PLL_EXT19M        0x05
+#define MPU6050_CLOCK_KEEP_RESET        0x07
+
+#define MPU6050_PWR2_LP_WAKE_CTRL_BIT       7
+#define MPU6050_PWR2_LP_WAKE_CTRL_LENGTH    2
+#define MPU6050_PWR2_STBY_XA_BIT            5
+#define MPU6050_PWR2_STBY_YA_BIT            4
+#define MPU6050_PWR2_STBY_ZA_BIT            3
+#define MPU6050_PWR2_STBY_XG_BIT            2
+#define MPU6050_PWR2_STBY_YG_BIT            1
+#define MPU6050_PWR2_STBY_ZG_BIT            0
+
+#define MPU6050_WAKE_FREQ_1P25      0x0
+#define MPU6050_WAKE_FREQ_2P5       0x1
+#define MPU6050_WAKE_FREQ_5         0x2
+#define MPU6050_WAKE_FREQ_10        0x3
+
+#define MPU6050_BANKSEL_PRFTCH_EN_BIT       6
+#define MPU6050_BANKSEL_CFG_USER_BANK_BIT   5
+#define MPU6050_BANKSEL_MEM_SEL_BIT         4
+#define MPU6050_BANKSEL_MEM_SEL_LENGTH      5
+
+#define MPU6050_WHO_AM_I_BIT        6
+#define MPU6050_WHO_AM_I_LENGTH     6
+
+#define MPU6050_DMP_MEMORY_BANKS        8
+#define MPU6050_DMP_MEMORY_BANK_SIZE    256
+#define MPU6050_DMP_MEMORY_CHUNK_SIZE   16
+
+// note: DMP code memory blocks defined at end of header file
+
+class MPU6050 {
+    public:
+        MPU6050();
+        MPU6050(uint8_t address);
+
+        void initialize();
+        bool testConnection();
+
+        // AUX_VDDIO register
+        uint8_t getAuxVDDIOLevel();
+        void setAuxVDDIOLevel(uint8_t level);
+
+        // SMPLRT_DIV register
+        uint8_t getRate();
+        void setRate(uint8_t rate);
+
+        // CONFIG register
+        uint8_t getExternalFrameSync();
+        void setExternalFrameSync(uint8_t sync);
+        uint8_t getDLPFMode();
+        void setDLPFMode(uint8_t bandwidth);
+
+        // GYRO_CONFIG register
+        uint8_t getFullScaleGyroRange();
+        void setFullScaleGyroRange(uint8_t range);
+
+        // ACCEL_CONFIG register
+        bool getAccelXSelfTest();
+        void setAccelXSelfTest(bool enabled);
+        bool getAccelYSelfTest();
+        void setAccelYSelfTest(bool enabled);
+        bool getAccelZSelfTest();
+        void setAccelZSelfTest(bool enabled);
+        uint8_t getFullScaleAccelRange();
+        void setFullScaleAccelRange(uint8_t range);
+        uint8_t getDHPFMode();
+        void setDHPFMode(uint8_t mode);
+
+        // FF_THR register
+        uint8_t getFreefallDetectionThreshold();
+        void setFreefallDetectionThreshold(uint8_t threshold);
+
+        // FF_DUR register
+        uint8_t getFreefallDetectionDuration();
+        void setFreefallDetectionDuration(uint8_t duration);
+
+        // MOT_THR register
+        uint8_t getMotionDetectionThreshold();
+        void setMotionDetectionThreshold(uint8_t threshold);
+
+        // MOT_DUR register
+        uint8_t getMotionDetectionDuration();
+        void setMotionDetectionDuration(uint8_t duration);
+
+        // ZRMOT_THR register
+        uint8_t getZeroMotionDetectionThreshold();
+        void setZeroMotionDetectionThreshold(uint8_t threshold);
+
+        // ZRMOT_DUR register
+        uint8_t getZeroMotionDetectionDuration();
+        void setZeroMotionDetectionDuration(uint8_t duration);
+
+        // FIFO_EN register
+        bool getTempFIFOEnabled();
+        void setTempFIFOEnabled(bool enabled);
+        bool getXGyroFIFOEnabled();
+        void setXGyroFIFOEnabled(bool enabled);
+        bool getYGyroFIFOEnabled();
+        void setYGyroFIFOEnabled(bool enabled);
+        bool getZGyroFIFOEnabled();
+        void setZGyroFIFOEnabled(bool enabled);
+        bool getAccelFIFOEnabled();
+        void setAccelFIFOEnabled(bool enabled);
+        bool getSlave2FIFOEnabled();
+        void setSlave2FIFOEnabled(bool enabled);
+        bool getSlave1FIFOEnabled();
+        void setSlave1FIFOEnabled(bool enabled);
+        bool getSlave0FIFOEnabled();
+        void setSlave0FIFOEnabled(bool enabled);
+
+        // I2C_MST_CTRL register
+        bool getMultiMasterEnabled();
+        void setMultiMasterEnabled(bool enabled);
+        bool getWaitForExternalSensorEnabled();
+        void setWaitForExternalSensorEnabled(bool enabled);
+        bool getSlave3FIFOEnabled();
+        void setSlave3FIFOEnabled(bool enabled);
+        bool getSlaveReadWriteTransitionEnabled();
+        void setSlaveReadWriteTransitionEnabled(bool enabled);
+        uint8_t getMasterClockSpeed();
+        void setMasterClockSpeed(uint8_t speed);
+
+        // I2C_SLV* registers (Slave 0-3)
+        uint8_t getSlaveAddress(uint8_t num);
+        void setSlaveAddress(uint8_t num, uint8_t address);
+        uint8_t getSlaveRegister(uint8_t num);
+        void setSlaveRegister(uint8_t num, uint8_t reg);
+        bool getSlaveEnabled(uint8_t num);
+        void setSlaveEnabled(uint8_t num, bool enabled);
+        bool getSlaveWordByteSwap(uint8_t num);
+        void setSlaveWordByteSwap(uint8_t num, bool enabled);
+        bool getSlaveWriteMode(uint8_t num);
+        void setSlaveWriteMode(uint8_t num, bool mode);
+        bool getSlaveWordGroupOffset(uint8_t num);
+        void setSlaveWordGroupOffset(uint8_t num, bool enabled);
+        uint8_t getSlaveDataLength(uint8_t num);
+        void setSlaveDataLength(uint8_t num, uint8_t length);
+
+        // I2C_SLV* registers (Slave 4)
+        uint8_t getSlave4Address();
+        void setSlave4Address(uint8_t address);
+        uint8_t getSlave4Register();
+        void setSlave4Register(uint8_t reg);
+        void setSlave4OutputByte(uint8_t data);
+        bool getSlave4Enabled();
+        void setSlave4Enabled(bool enabled);
+        bool getSlave4InterruptEnabled();
+        void setSlave4InterruptEnabled(bool enabled);
+        bool getSlave4WriteMode();
+        void setSlave4WriteMode(bool mode);
+        uint8_t getSlave4MasterDelay();
+        void setSlave4MasterDelay(uint8_t delay);
+        uint8_t getSlate4InputByte();
+
+        // I2C_MST_STATUS register
+        bool getPassthroughStatus();
+        bool getSlave4IsDone();
+        bool getLostArbitration();
+        bool getSlave4Nack();
+        bool getSlave3Nack();
+        bool getSlave2Nack();
+        bool getSlave1Nack();
+        bool getSlave0Nack();
+
+        // INT_PIN_CFG register
+        bool getInterruptMode();
+        void setInterruptMode(bool mode);
+        bool getInterruptDrive();
+        void setInterruptDrive(bool drive);
+        bool getInterruptLatch();
+        void setInterruptLatch(bool latch);
+        bool getInterruptLatchClear();
+        void setInterruptLatchClear(bool clear);
+        bool getFSyncInterruptLevel();
+        void setFSyncInterruptLevel(bool level);
+        bool getFSyncInterruptEnabled();
+        void setFSyncInterruptEnabled(bool enabled);
+        bool getI2CBypassEnabled();
+        void setI2CBypassEnabled(bool enabled);
+        bool getClockOutputEnabled();
+        void setClockOutputEnabled(bool enabled);
+
+        // INT_ENABLE register
+        uint8_t getIntEnabled();
+        void setIntEnabled(uint8_t enabled);
+        bool getIntFreefallEnabled();
+        void setIntFreefallEnabled(bool enabled);
+        bool getIntMotionEnabled();
+        void setIntMotionEnabled(bool enabled);
+        bool getIntZeroMotionEnabled();
+        void setIntZeroMotionEnabled(bool enabled);
+        bool getIntFIFOBufferOverflowEnabled();
+        void setIntFIFOBufferOverflowEnabled(bool enabled);
+        bool getIntI2CMasterEnabled();
+        void setIntI2CMasterEnabled(bool enabled);
+        bool getIntDataReadyEnabled();
+        void setIntDataReadyEnabled(bool enabled);
+
+        // INT_STATUS register
+        uint8_t getIntStatus();
+        bool getIntFreefallStatus();
+        bool getIntMotionStatus();
+        bool getIntZeroMotionStatus();
+        bool getIntFIFOBufferOverflowStatus();
+        bool getIntI2CMasterStatus();
+        bool getIntDataReadyStatus();
+
+        // ACCEL_*OUT_* registers
+        void getMotion9(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz, int16_t* mx, int16_t* my, int16_t* mz);
+        void getMotion6(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz);
+        void getAcceleration(int16_t* x, int16_t* y, int16_t* z);
+        int16_t getAccelerationX();
+        int16_t getAccelerationY();
+        int16_t getAccelerationZ();
+
+        // TEMP_OUT_* registers
+        int16_t getTemperature();
+
+        // GYRO_*OUT_* registers
+        void getRotation(int16_t* x, int16_t* y, int16_t* z);
+        int16_t getRotationX();
+        int16_t getRotationY();
+        int16_t getRotationZ();
+
+        // EXT_SENS_DATA_* registers
+        uint8_t getExternalSensorByte(int position);
+        uint16_t getExternalSensorWord(int position);
+        uint32_t getExternalSensorDWord(int position);
+
+        // MOT_DETECT_STATUS register
+        bool getXNegMotionDetected();
+        bool getXPosMotionDetected();
+        bool getYNegMotionDetected();
+        bool getYPosMotionDetected();
+        bool getZNegMotionDetected();
+        bool getZPosMotionDetected();
+        bool getZeroMotionDetected();
+
+        // I2C_SLV*_DO register
+        void setSlaveOutputByte(uint8_t num, uint8_t data);
+
+        // I2C_MST_DELAY_CTRL register
+        bool getExternalShadowDelayEnabled();
+        void setExternalShadowDelayEnabled(bool enabled);
+        bool getSlaveDelayEnabled(uint8_t num);
+        void setSlaveDelayEnabled(uint8_t num, bool enabled);
+
+        // SIGNAL_PATH_RESET register
+        void resetGyroscopePath();
+        void resetAccelerometerPath();
+        void resetTemperaturePath();
+
+        // MOT_DETECT_CTRL register
+        uint8_t getAccelerometerPowerOnDelay();
+        void setAccelerometerPowerOnDelay(uint8_t delay);
+        uint8_t getFreefallDetectionCounterDecrement();
+        void setFreefallDetectionCounterDecrement(uint8_t decrement);
+        uint8_t getMotionDetectionCounterDecrement();
+        void setMotionDetectionCounterDecrement(uint8_t decrement);
+
+        // USER_CTRL register
+        bool getFIFOEnabled();
+        void setFIFOEnabled(bool enabled);
+        bool getI2CMasterModeEnabled();
+        void setI2CMasterModeEnabled(bool enabled);
+        void switchSPIEnabled(bool enabled);
+        void resetFIFO();
+        void resetI2CMaster();
+        void resetSensors();
+
+        // PWR_MGMT_1 register
+        void reset();
+        bool getSleepEnabled();
+        void setSleepEnabled(bool enabled);
+        bool getWakeCycleEnabled();
+        void setWakeCycleEnabled(bool enabled);
+        bool getTempSensorEnabled();
+        void setTempSensorEnabled(bool enabled);
+        uint8_t getClockSource();
+        void setClockSource(uint8_t source);
+
+        // PWR_MGMT_2 register
+        uint8_t getWakeFrequency();
+        void setWakeFrequency(uint8_t frequency);
+        bool getStandbyXAccelEnabled();
+        void setStandbyXAccelEnabled(bool enabled);
+        bool getStandbyYAccelEnabled();
+        void setStandbyYAccelEnabled(bool enabled);
+        bool getStandbyZAccelEnabled();
+        void setStandbyZAccelEnabled(bool enabled);
+        bool getStandbyXGyroEnabled();
+        void setStandbyXGyroEnabled(bool enabled);
+        bool getStandbyYGyroEnabled();
+        void setStandbyYGyroEnabled(bool enabled);
+        bool getStandbyZGyroEnabled();
+        void setStandbyZGyroEnabled(bool enabled);
+
+        // FIFO_COUNT_* registers
+        uint16_t getFIFOCount();
+
+        // FIFO_R_W register
+        uint8_t getFIFOByte();
+        void setFIFOByte(uint8_t data);
+        void getFIFOBytes(uint8_t *data, uint8_t length);
+
+        // WHO_AM_I register
+        uint8_t getDeviceID();
+        void setDeviceID(uint8_t id);
+        
+        // ======== UNDOCUMENTED/DMP REGISTERS/METHODS ========
+        
+        // XG_OFFS_TC register
+        uint8_t getOTPBankValid();
+        void setOTPBankValid(bool enabled);
+        int8_t getXGyroOffsetTC();
+        void setXGyroOffsetTC(int8_t offset);
+
+        // YG_OFFS_TC register
+        int8_t getYGyroOffsetTC();
+        void setYGyroOffsetTC(int8_t offset);
+
+        // ZG_OFFS_TC register
+        int8_t getZGyroOffsetTC();
+        void setZGyroOffsetTC(int8_t offset);
+
+        // X_FINE_GAIN register
+        int8_t getXFineGain();
+        void setXFineGain(int8_t gain);
+
+        // Y_FINE_GAIN register
+        int8_t getYFineGain();
+        void setYFineGain(int8_t gain);
+
+        // Z_FINE_GAIN register
+        int8_t getZFineGain();
+        void setZFineGain(int8_t gain);
+
+        // XA_OFFS_* registers
+        int16_t getXAccelOffset();
+        void setXAccelOffset(int16_t offset);
+
+        // YA_OFFS_* register
+        int16_t getYAccelOffset();
+        void setYAccelOffset(int16_t offset);
+
+        // ZA_OFFS_* register
+        int16_t getZAccelOffset();
+        void setZAccelOffset(int16_t offset);
+
+        // XG_OFFS_USR* registers
+        int16_t getXGyroOffset();
+        void setXGyroOffset(int16_t offset);
+
+        // YG_OFFS_USR* register
+        int16_t getYGyroOffset();
+        void setYGyroOffset(int16_t offset);
+
+        // ZG_OFFS_USR* register
+        int16_t getZGyroOffset();
+        void setZGyroOffset(int16_t offset);
+        
+        // INT_ENABLE register (DMP functions)
+        bool getIntPLLReadyEnabled();
+        void setIntPLLReadyEnabled(bool enabled);
+        bool getIntDMPEnabled();
+        void setIntDMPEnabled(bool enabled);
+        
+        // DMP_INT_STATUS
+        bool getDMPInt5Status();
+        bool getDMPInt4Status();
+        bool getDMPInt3Status();
+        bool getDMPInt2Status();
+        bool getDMPInt1Status();
+        bool getDMPInt0Status();
+
+        // INT_STATUS register (DMP functions)
+        bool getIntPLLReadyStatus();
+        bool getIntDMPStatus();
+        
+        // USER_CTRL register (DMP functions)
+        bool getDMPEnabled();
+        void setDMPEnabled(bool enabled);
+        void resetDMP();
+        
+        // BANK_SEL register
+        void setMemoryBank(uint8_t bank, bool prefetchEnabled=false, bool userBank=false);
+        
+        // MEM_START_ADDR register
+        void setMemoryStartAddress(uint8_t address);
+        
+        // MEM_R_W register
+        uint8_t readMemoryByte();
+        void writeMemoryByte(uint8_t data);
+        void readMemoryBlock(uint8_t *data, uint16_t dataSize, uint8_t bank=0, uint8_t address=0);
+        bool writeMemoryBlock(const uint8_t *data, uint16_t dataSize, uint8_t bank=0, uint8_t address=0, bool verify=true, bool useProgMem=false);
+        bool writeProgMemoryBlock(const uint8_t *data, uint16_t dataSize, uint8_t bank=0, uint8_t address=0, bool verify=true);
+
+        bool writeDMPConfigurationSet(const uint8_t *data, uint16_t dataSize, bool useProgMem=false);
+        bool writeProgDMPConfigurationSet(const uint8_t *data, uint16_t dataSize);
+
+        // DMP_CFG_1 register
+        uint8_t getDMPConfig1();
+        void setDMPConfig1(uint8_t config);
+
+        // DMP_CFG_2 register
+        uint8_t getDMPConfig2();
+        void setDMPConfig2(uint8_t config);
+
+        // special methods for MotionApps 2.0 implementation
+        #ifdef MPU6050_INCLUDE_DMP_MOTIONAPPS20
+            uint8_t *dmpPacketBuffer;
+            uint16_t dmpPacketSize;
+
+            uint8_t dmpInitialize();
+            bool dmpPacketAvailable();
+
+            uint8_t dmpSetFIFORate(uint8_t fifoRate);
+            uint8_t dmpGetFIFORate();
+            uint8_t dmpGetSampleStepSizeMS();
+            uint8_t dmpGetSampleFrequency();
+            int32_t dmpDecodeTemperature(int8_t tempReg);
+            
+            // Register callbacks after a packet of FIFO data is processed
+            //uint8_t dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority);
+            //uint8_t dmpUnregisterFIFORateProcess(inv_obj_func func);
+            uint8_t dmpRunFIFORateProcesses();
+            
+            // Setup FIFO for various output
+            uint8_t dmpSendQuaternion(uint_fast16_t accuracy);
+            uint8_t dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendPacketNumber(uint_fast16_t accuracy);
+            uint8_t dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy);
+
+            // Get Fixed Point data from FIFO
+            uint8_t dmpGetAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternion(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternion(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternion(Quaternion *q, const uint8_t* packet=0);
+            uint8_t dmpGet6AxisQuaternion(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGet6AxisQuaternion(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGet6AxisQuaternion(Quaternion *q, const uint8_t* packet=0);
+            uint8_t dmpGetRelativeQuaternion(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetRelativeQuaternion(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetRelativeQuaternion(Quaternion *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyro(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyro(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyro(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpSetLinearAccelFilterCoefficient(float coef);
+            uint8_t dmpGetLinearAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity);
+            uint8_t dmpGetLinearAccelInWorld(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccelInWorld(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccelInWorld(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q);
+            uint8_t dmpGetGyroAndAccelSensor(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroAndAccelSensor(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroAndAccelSensor(VectorInt16 *g, VectorInt16 *a, const uint8_t* packet=0);
+            uint8_t dmpGetGyroSensor(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroSensor(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroSensor(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetControlData(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetTemperature(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(VectorFloat *v, Quaternion *q);
+            uint8_t dmpGetUnquantizedAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetUnquantizedAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetUnquantizedAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetQuantizedAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuantizedAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuantizedAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetExternalSensorData(int32_t *data, uint16_t size, const uint8_t* packet=0);
+            uint8_t dmpGetEIS(int32_t *data, const uint8_t* packet=0);
+            
+            uint8_t dmpGetEuler(float *data, Quaternion *q);
+            uint8_t dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity);
+
+            // Get Floating Point data from FIFO
+            uint8_t dmpGetAccelFloat(float *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternionFloat(float *data, const uint8_t* packet=0);
+
+            uint8_t dmpProcessFIFOPacket(const unsigned char *dmpData);
+            uint8_t dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed=NULL);
+
+            uint8_t dmpSetFIFOProcessedCallback(void (*func) (void));
+
+            uint8_t dmpInitFIFOParam();
+            uint8_t dmpCloseFIFO();
+            uint8_t dmpSetGyroDataSource(uint8_t source);
+            uint8_t dmpDecodeQuantizedAccel();
+            uint32_t dmpGetGyroSumOfSquare();
+            uint32_t dmpGetAccelSumOfSquare();
+            void dmpOverrideQuaternion(long *q);
+            uint16_t dmpGetFIFOPacketSize();
+        #endif
+
+        // special methods for MotionApps 4.1 implementation
+        #ifdef MPU6050_INCLUDE_DMP_MOTIONAPPS41
+            uint8_t *dmpPacketBuffer;
+            uint16_t dmpPacketSize;
+
+            uint8_t dmpInitialize();
+            bool dmpPacketAvailable();
+
+            uint8_t dmpSetFIFORate(uint8_t fifoRate);
+            uint8_t dmpGetFIFORate();
+            uint8_t dmpGetSampleStepSizeMS();
+            uint8_t dmpGetSampleFrequency();
+            int32_t dmpDecodeTemperature(int8_t tempReg);
+            
+            // Register callbacks after a packet of FIFO data is processed
+            //uint8_t dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority);
+            //uint8_t dmpUnregisterFIFORateProcess(inv_obj_func func);
+            uint8_t dmpRunFIFORateProcesses();
+            
+            // Setup FIFO for various output
+            uint8_t dmpSendQuaternion(uint_fast16_t accuracy);
+            uint8_t dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendPacketNumber(uint_fast16_t accuracy);
+            uint8_t dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+            uint8_t dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy);
+
+            // Get Fixed Point data from FIFO
+            uint8_t dmpGetAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternion(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternion(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternion(Quaternion *q, const uint8_t* packet=0);
+            uint8_t dmpGet6AxisQuaternion(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGet6AxisQuaternion(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGet6AxisQuaternion(Quaternion *q, const uint8_t* packet=0);
+            uint8_t dmpGetRelativeQuaternion(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetRelativeQuaternion(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetRelativeQuaternion(Quaternion *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyro(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyro(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyro(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetMag(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpSetLinearAccelFilterCoefficient(float coef);
+            uint8_t dmpGetLinearAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity);
+            uint8_t dmpGetLinearAccelInWorld(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccelInWorld(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccelInWorld(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q);
+            uint8_t dmpGetGyroAndAccelSensor(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroAndAccelSensor(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroAndAccelSensor(VectorInt16 *g, VectorInt16 *a, const uint8_t* packet=0);
+            uint8_t dmpGetGyroSensor(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroSensor(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGyroSensor(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetControlData(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetTemperature(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetGravity(VectorFloat *v, Quaternion *q);
+            uint8_t dmpGetUnquantizedAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetUnquantizedAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetUnquantizedAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetQuantizedAccel(int32_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuantizedAccel(int16_t *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuantizedAccel(VectorInt16 *v, const uint8_t* packet=0);
+            uint8_t dmpGetExternalSensorData(int32_t *data, uint16_t size, const uint8_t* packet=0);
+            uint8_t dmpGetEIS(int32_t *data, const uint8_t* packet=0);
+            
+            uint8_t dmpGetEuler(float *data, Quaternion *q);
+            uint8_t dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity);
+
+            // Get Floating Point data from FIFO
+            uint8_t dmpGetAccelFloat(float *data, const uint8_t* packet=0);
+            uint8_t dmpGetQuaternionFloat(float *data, const uint8_t* packet=0);
+
+            uint8_t dmpProcessFIFOPacket(const unsigned char *dmpData);
+            uint8_t dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed=NULL);
+
+            uint8_t dmpSetFIFOProcessedCallback(void (*func) (void));
+
+            uint8_t dmpInitFIFOParam();
+            uint8_t dmpCloseFIFO();
+            uint8_t dmpSetGyroDataSource(uint8_t source);
+            uint8_t dmpDecodeQuantizedAccel();
+            uint32_t dmpGetGyroSumOfSquare();
+            uint32_t dmpGetAccelSumOfSquare();
+            void dmpOverrideQuaternion(long *q);
+            uint16_t dmpGetFIFOPacketSize();
+        #endif
+
+    private:
+        uint8_t devAddr;
+        uint8_t buffer[14];
+};
+
+#endif /* _MPU6050_H_ */

libraries/MPU6050/MPU6050_6Axis_MotionApps20.h

@@ -0,0 +1,741 @@
+// I2Cdev library collection - MPU6050 I2C device class, 6-axis MotionApps 2.0 implementation
+// Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00)
+// 5/20/2013 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//     ... - ongoing debug release
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2012 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+#ifndef _MPU6050_6AXIS_MOTIONAPPS20_H_
+#define _MPU6050_6AXIS_MOTIONAPPS20_H_
+
+#include "I2Cdev.h"
+#include "helper_3dmath.h"
+
+// MotionApps 2.0 DMP implementation, built using the MPU-6050EVB evaluation board
+#define MPU6050_INCLUDE_DMP_MOTIONAPPS20
+
+#include "MPU6050.h"
+
+// Tom Carpenter's conditional PROGMEM code
+// http://forum.arduino.cc/index.php?topic=129407.0
+#ifndef __arm__
+    //#include <avr/pgmspace.h>
+#else
+    // Teensy 3.0 library conditional PROGMEM code from Paul Stoffregen
+    #ifndef __PGMSPACE_H_
+        #define __PGMSPACE_H_ 1
+        #include <inttypes.h>
+
+        #define PROGMEM
+        #define PGM_P  const char *
+        #define PSTR(str) (str)
+        #define F(x) x
+
+        typedef void prog_void;
+        typedef char prog_char;
+        typedef unsigned char prog_uchar;
+        typedef int8_t prog_int8_t;
+        typedef uint8_t prog_uint8_t;
+        typedef int16_t prog_int16_t;
+        typedef uint16_t prog_uint16_t;
+        typedef int32_t prog_int32_t;
+        typedef uint32_t prog_uint32_t;
+        
+        #define strcpy_P(dest, src) strcpy((dest), (src))
+        #define strcat_P(dest, src) strcat((dest), (src))
+        #define strcmp_P(a, b) strcmp((a), (b))
+        
+        #define pgm_read_byte(addr) (*(const unsigned char *)(addr))
+        #define pgm_read_word(addr) (*(const unsigned short *)(addr))
+        #define pgm_read_dword(addr) (*(const unsigned long *)(addr))
+        #define pgm_read_float(addr) (*(const float *)(addr))
+        
+        #define pgm_read_byte_near(addr) pgm_read_byte(addr)
+        #define pgm_read_word_near(addr) pgm_read_word(addr)
+        #define pgm_read_dword_near(addr) pgm_read_dword(addr)
+        #define pgm_read_float_near(addr) pgm_read_float(addr)
+        #define pgm_read_byte_far(addr) pgm_read_byte(addr)
+        #define pgm_read_word_far(addr) pgm_read_word(addr)
+        #define pgm_read_dword_far(addr) pgm_read_dword(addr)
+        #define pgm_read_float_far(addr) pgm_read_float(addr)
+    #endif
+#endif
+
+/* Source is from the InvenSense MotionApps v2 demo code. Original source is
+ * unavailable, unless you happen to be amazing as decompiling binary by
+ * hand (in which case, please contact me, and I'm totally serious).
+ *
+ * Also, I'd like to offer many, many thanks to Noah Zerkin for all of the
+ * DMP reverse-engineering he did to help make this bit of wizardry
+ * possible.
+ */
+
+// NOTE! Enabling DEBUG adds about 3.3kB to the flash program size.
+// Debug output is now working even on ATMega328P MCUs (e.g. Arduino Uno)
+// after moving string constants to flash memory storage using the F()
+// compiler macro (Arduino IDE 1.0+ required).
+
+//#define DEBUG
+#ifdef DEBUG
+    #define DEBUG_PRINT(x) Serial.print(x)
+    #define DEBUG_PRINTF(x, y) Serial.print(x, y)
+    #define DEBUG_PRINTLN(x) Serial.println(x)
+    #define DEBUG_PRINTLNF(x, y) Serial.println(x, y)
+#else
+    #define DEBUG_PRINT(x)
+    #define DEBUG_PRINTF(x, y)
+    #define DEBUG_PRINTLN(x)
+    #define DEBUG_PRINTLNF(x, y)
+#endif
+
+#define MPU6050_DMP_CODE_SIZE       1929    // dmpMemory[]
+#define MPU6050_DMP_CONFIG_SIZE     192     // dmpConfig[]
+#define MPU6050_DMP_UPDATES_SIZE    47      // dmpUpdates[]
+
+/* ================================================================================================ *
+ | Default MotionApps v2.0 42-byte FIFO packet structure:                                           |
+ |                                                                                                  |
+ | [QUAT W][      ][QUAT X][      ][QUAT Y][      ][QUAT Z][      ][GYRO X][      ][GYRO Y][      ] |
+ |   0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  |
+ |                                                                                                  |
+ | [GYRO Z][      ][ACC X ][      ][ACC Y ][      ][ACC Z ][      ][      ]                         |
+ |  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41                          |
+ * ================================================================================================ */
+
+// this block of memory gets written to the MPU on start-up, and it seems
+// to be volatile memory, so it has to be done each time (it only takes ~1
+// second though)
+const unsigned char dmpMemory[MPU6050_DMP_CODE_SIZE] PROGMEM = {
+    // bank 0, 256 bytes
+    0xFB, 0x00, 0x00, 0x3E, 0x00, 0x0B, 0x00, 0x36, 0x00, 0x01, 0x00, 0x02, 0x00, 0x03, 0x00, 0x00,
+    0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0xFA, 0x80, 0x00, 0x0B, 0x12, 0x82, 0x00, 0x01,
+    0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x28, 0x00, 0x00, 0xFF, 0xFF, 0x45, 0x81, 0xFF, 0xFF, 0xFA, 0x72, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x03, 0xE8, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x7F, 0xFF, 0xFF, 0xFE, 0x80, 0x01,
+    0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x3E, 0x03, 0x30, 0x40, 0x00, 0x00, 0x00, 0x02, 0xCA, 0xE3, 0x09, 0x3E, 0x80, 0x00, 0x00,
+    0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00,
+    0x41, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x0B, 0x2A, 0x00, 0x00, 0x16, 0x55, 0x00, 0x00, 0x21, 0x82,
+    0xFD, 0x87, 0x26, 0x50, 0xFD, 0x80, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x05, 0x80, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x6F, 0x00, 0x02, 0x65, 0x32, 0x00, 0x00, 0x5E, 0xC0,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xFB, 0x8C, 0x6F, 0x5D, 0xFD, 0x5D, 0x08, 0xD9, 0x00, 0x7C, 0x73, 0x3B, 0x00, 0x6C, 0x12, 0xCC,
+    0x32, 0x00, 0x13, 0x9D, 0x32, 0x00, 0xD0, 0xD6, 0x32, 0x00, 0x08, 0x00, 0x40, 0x00, 0x01, 0xF4,
+    0xFF, 0xE6, 0x80, 0x79, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xD6, 0x00, 0x00, 0x27, 0x10,
+
+    // bank 1, 256 bytes
+    0xFB, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0xFA, 0x36, 0xFF, 0xBC, 0x30, 0x8E, 0x00, 0x05, 0xFB, 0xF0, 0xFF, 0xD9, 0x5B, 0xC8,
+    0xFF, 0xD0, 0x9A, 0xBE, 0x00, 0x00, 0x10, 0xA9, 0xFF, 0xF4, 0x1E, 0xB2, 0x00, 0xCE, 0xBB, 0xF7,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04, 0x00, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00, 0x0C,
+    0xFF, 0xC2, 0x80, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0xCF, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x14,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x03, 0x3F, 0x68, 0xB6, 0x79, 0x35, 0x28, 0xBC, 0xC6, 0x7E, 0xD1, 0x6C,
+    0x80, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB2, 0x6A, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xF0, 0x00, 0x00, 0x00, 0x30,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x25, 0x4D, 0x00, 0x2F, 0x70, 0x6D, 0x00, 0x00, 0x05, 0xAE, 0x00, 0x0C, 0x02, 0xD0,
+
+    // bank 2, 256 bytes
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x00, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x01, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x00, 0x00, 0x54, 0x00, 0x00, 0xFF, 0xEF, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00,
+    0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+    // bank 3, 256 bytes
+    0xD8, 0xDC, 0xBA, 0xA2, 0xF1, 0xDE, 0xB2, 0xB8, 0xB4, 0xA8, 0x81, 0x91, 0xF7, 0x4A, 0x90, 0x7F,
+    0x91, 0x6A, 0xF3, 0xF9, 0xDB, 0xA8, 0xF9, 0xB0, 0xBA, 0xA0, 0x80, 0xF2, 0xCE, 0x81, 0xF3, 0xC2,
+    0xF1, 0xC1, 0xF2, 0xC3, 0xF3, 0xCC, 0xA2, 0xB2, 0x80, 0xF1, 0xC6, 0xD8, 0x80, 0xBA, 0xA7, 0xDF,
+    0xDF, 0xDF, 0xF2, 0xA7, 0xC3, 0xCB, 0xC5, 0xB6, 0xF0, 0x87, 0xA2, 0x94, 0x24, 0x48, 0x70, 0x3C,
+    0x95, 0x40, 0x68, 0x34, 0x58, 0x9B, 0x78, 0xA2, 0xF1, 0x83, 0x92, 0x2D, 0x55, 0x7D, 0xD8, 0xB1,
+    0xB4, 0xB8, 0xA1, 0xD0, 0x91, 0x80, 0xF2, 0x70, 0xF3, 0x70, 0xF2, 0x7C, 0x80, 0xA8, 0xF1, 0x01,
+    0xB0, 0x98, 0x87, 0xD9, 0x43, 0xD8, 0x86, 0xC9, 0x88, 0xBA, 0xA1, 0xF2, 0x0E, 0xB8, 0x97, 0x80,
+    0xF1, 0xA9, 0xDF, 0xDF, 0xDF, 0xAA, 0xDF, 0xDF, 0xDF, 0xF2, 0xAA, 0xC5, 0xCD, 0xC7, 0xA9, 0x0C,
+    0xC9, 0x2C, 0x97, 0x97, 0x97, 0x97, 0xF1, 0xA9, 0x89, 0x26, 0x46, 0x66, 0xB0, 0xB4, 0xBA, 0x80,
+    0xAC, 0xDE, 0xF2, 0xCA, 0xF1, 0xB2, 0x8C, 0x02, 0xA9, 0xB6, 0x98, 0x00, 0x89, 0x0E, 0x16, 0x1E,
+    0xB8, 0xA9, 0xB4, 0x99, 0x2C, 0x54, 0x7C, 0xB0, 0x8A, 0xA8, 0x96, 0x36, 0x56, 0x76, 0xF1, 0xB9,
+    0xAF, 0xB4, 0xB0, 0x83, 0xC0, 0xB8, 0xA8, 0x97, 0x11, 0xB1, 0x8F, 0x98, 0xB9, 0xAF, 0xF0, 0x24,
+    0x08, 0x44, 0x10, 0x64, 0x18, 0xF1, 0xA3, 0x29, 0x55, 0x7D, 0xAF, 0x83, 0xB5, 0x93, 0xAF, 0xF0,
+    0x00, 0x28, 0x50, 0xF1, 0xA3, 0x86, 0x9F, 0x61, 0xA6, 0xDA, 0xDE, 0xDF, 0xD9, 0xFA, 0xA3, 0x86,
+    0x96, 0xDB, 0x31, 0xA6, 0xD9, 0xF8, 0xDF, 0xBA, 0xA6, 0x8F, 0xC2, 0xC5, 0xC7, 0xB2, 0x8C, 0xC1,
+    0xB8, 0xA2, 0xDF, 0xDF, 0xDF, 0xA3, 0xDF, 0xDF, 0xDF, 0xD8, 0xD8, 0xF1, 0xB8, 0xA8, 0xB2, 0x86,
+
+    // bank 4, 256 bytes
+    0xB4, 0x98, 0x0D, 0x35, 0x5D, 0xB8, 0xAA, 0x98, 0xB0, 0x87, 0x2D, 0x35, 0x3D, 0xB2, 0xB6, 0xBA,
+    0xAF, 0x8C, 0x96, 0x19, 0x8F, 0x9F, 0xA7, 0x0E, 0x16, 0x1E, 0xB4, 0x9A, 0xB8, 0xAA, 0x87, 0x2C,
+    0x54, 0x7C, 0xB9, 0xA3, 0xDE, 0xDF, 0xDF, 0xA3, 0xB1, 0x80, 0xF2, 0xC4, 0xCD, 0xC9, 0xF1, 0xB8,
+    0xA9, 0xB4, 0x99, 0x83, 0x0D, 0x35, 0x5D, 0x89, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0xB5, 0x93, 0xA3,
+    0x0E, 0x16, 0x1E, 0xA9, 0x2C, 0x54, 0x7C, 0xB8, 0xB4, 0xB0, 0xF1, 0x97, 0x83, 0xA8, 0x11, 0x84,
+    0xA5, 0x09, 0x98, 0xA3, 0x83, 0xF0, 0xDA, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xD8, 0xF1, 0xA5,
+    0x29, 0x55, 0x7D, 0xA5, 0x85, 0x95, 0x02, 0x1A, 0x2E, 0x3A, 0x56, 0x5A, 0x40, 0x48, 0xF9, 0xF3,
+    0xA3, 0xD9, 0xF8, 0xF0, 0x98, 0x83, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0x97, 0x82, 0xA8, 0xF1,
+    0x11, 0xF0, 0x98, 0xA2, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xDA, 0xF3, 0xDE, 0xD8, 0x83, 0xA5,
+    0x94, 0x01, 0xD9, 0xA3, 0x02, 0xF1, 0xA2, 0xC3, 0xC5, 0xC7, 0xD8, 0xF1, 0x84, 0x92, 0xA2, 0x4D,
+    0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9,
+    0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0x93, 0xA3, 0x4D,
+    0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9,
+    0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0xA8, 0x8A, 0x9A,
+    0xF0, 0x28, 0x50, 0x78, 0x9E, 0xF3, 0x88, 0x18, 0xF1, 0x9F, 0x1D, 0x98, 0xA8, 0xD9, 0x08, 0xD8,
+    0xC8, 0x9F, 0x12, 0x9E, 0xF3, 0x15, 0xA8, 0xDA, 0x12, 0x10, 0xD8, 0xF1, 0xAF, 0xC8, 0x97, 0x87,
+
+    // bank 5, 256 bytes
+    0x34, 0xB5, 0xB9, 0x94, 0xA4, 0x21, 0xF3, 0xD9, 0x22, 0xD8, 0xF2, 0x2D, 0xF3, 0xD9, 0x2A, 0xD8,
+    0xF2, 0x35, 0xF3, 0xD9, 0x32, 0xD8, 0x81, 0xA4, 0x60, 0x60, 0x61, 0xD9, 0x61, 0xD8, 0x6C, 0x68,
+    0x69, 0xD9, 0x69, 0xD8, 0x74, 0x70, 0x71, 0xD9, 0x71, 0xD8, 0xB1, 0xA3, 0x84, 0x19, 0x3D, 0x5D,
+    0xA3, 0x83, 0x1A, 0x3E, 0x5E, 0x93, 0x10, 0x30, 0x81, 0x10, 0x11, 0xB8, 0xB0, 0xAF, 0x8F, 0x94,
+    0xF2, 0xDA, 0x3E, 0xD8, 0xB4, 0x9A, 0xA8, 0x87, 0x29, 0xDA, 0xF8, 0xD8, 0x87, 0x9A, 0x35, 0xDA,
+    0xF8, 0xD8, 0x87, 0x9A, 0x3D, 0xDA, 0xF8, 0xD8, 0xB1, 0xB9, 0xA4, 0x98, 0x85, 0x02, 0x2E, 0x56,
+    0xA5, 0x81, 0x00, 0x0C, 0x14, 0xA3, 0x97, 0xB0, 0x8A, 0xF1, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9,
+    0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x84, 0x0D, 0xDA, 0x0E, 0xD8, 0xA3, 0x29, 0x83, 0xDA,
+    0x2C, 0x0E, 0xD8, 0xA3, 0x84, 0x49, 0x83, 0xDA, 0x2C, 0x4C, 0x0E, 0xD8, 0xB8, 0xB0, 0xA8, 0x8A,
+    0x9A, 0xF5, 0x20, 0xAA, 0xDA, 0xDF, 0xD8, 0xA8, 0x40, 0xAA, 0xD0, 0xDA, 0xDE, 0xD8, 0xA8, 0x60,
+    0xAA, 0xDA, 0xD0, 0xDF, 0xD8, 0xF1, 0x97, 0x86, 0xA8, 0x31, 0x9B, 0x06, 0x99, 0x07, 0xAB, 0x97,
+    0x28, 0x88, 0x9B, 0xF0, 0x0C, 0x20, 0x14, 0x40, 0xB8, 0xB0, 0xB4, 0xA8, 0x8C, 0x9C, 0xF0, 0x04,
+    0x28, 0x51, 0x79, 0x1D, 0x30, 0x14, 0x38, 0xB2, 0x82, 0xAB, 0xD0, 0x98, 0x2C, 0x50, 0x50, 0x78,
+    0x78, 0x9B, 0xF1, 0x1A, 0xB0, 0xF0, 0x8A, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x8B, 0x29, 0x51, 0x79,
+    0x8A, 0x24, 0x70, 0x59, 0x8B, 0x20, 0x58, 0x71, 0x8A, 0x44, 0x69, 0x38, 0x8B, 0x39, 0x40, 0x68,
+    0x8A, 0x64, 0x48, 0x31, 0x8B, 0x30, 0x49, 0x60, 0xA5, 0x88, 0x20, 0x09, 0x71, 0x58, 0x44, 0x68,
+
+    // bank 6, 256 bytes
+    0x11, 0x39, 0x64, 0x49, 0x30, 0x19, 0xF1, 0xAC, 0x00, 0x2C, 0x54, 0x7C, 0xF0, 0x8C, 0xA8, 0x04,
+    0x28, 0x50, 0x78, 0xF1, 0x88, 0x97, 0x26, 0xA8, 0x59, 0x98, 0xAC, 0x8C, 0x02, 0x26, 0x46, 0x66,
+    0xF0, 0x89, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x24, 0x70, 0x59, 0x44, 0x69, 0x38, 0x64, 0x48, 0x31,
+    0xA9, 0x88, 0x09, 0x20, 0x59, 0x70, 0xAB, 0x11, 0x38, 0x40, 0x69, 0xA8, 0x19, 0x31, 0x48, 0x60,
+    0x8C, 0xA8, 0x3C, 0x41, 0x5C, 0x20, 0x7C, 0x00, 0xF1, 0x87, 0x98, 0x19, 0x86, 0xA8, 0x6E, 0x76,
+    0x7E, 0xA9, 0x99, 0x88, 0x2D, 0x55, 0x7D, 0x9E, 0xB9, 0xA3, 0x8A, 0x22, 0x8A, 0x6E, 0x8A, 0x56,
+    0x8A, 0x5E, 0x9F, 0xB1, 0x83, 0x06, 0x26, 0x46, 0x66, 0x0E, 0x2E, 0x4E, 0x6E, 0x9D, 0xB8, 0xAD,
+    0x00, 0x2C, 0x54, 0x7C, 0xF2, 0xB1, 0x8C, 0xB4, 0x99, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0x81, 0x91,
+    0xAC, 0x38, 0xAD, 0x3A, 0xB5, 0x83, 0x91, 0xAC, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9, 0x48, 0xD8,
+    0x6D, 0xD9, 0x68, 0xD8, 0x8C, 0x9D, 0xAE, 0x29, 0xD9, 0x04, 0xAE, 0xD8, 0x51, 0xD9, 0x04, 0xAE,
+    0xD8, 0x79, 0xD9, 0x04, 0xD8, 0x81, 0xF3, 0x9D, 0xAD, 0x00, 0x8D, 0xAE, 0x19, 0x81, 0xAD, 0xD9,
+    0x01, 0xD8, 0xF2, 0xAE, 0xDA, 0x26, 0xD8, 0x8E, 0x91, 0x29, 0x83, 0xA7, 0xD9, 0xAD, 0xAD, 0xAD,
+    0xAD, 0xF3, 0x2A, 0xD8, 0xD8, 0xF1, 0xB0, 0xAC, 0x89, 0x91, 0x3E, 0x5E, 0x76, 0xF3, 0xAC, 0x2E,
+    0x2E, 0xF1, 0xB1, 0x8C, 0x5A, 0x9C, 0xAC, 0x2C, 0x28, 0x28, 0x28, 0x9C, 0xAC, 0x30, 0x18, 0xA8,
+    0x98, 0x81, 0x28, 0x34, 0x3C, 0x97, 0x24, 0xA7, 0x28, 0x34, 0x3C, 0x9C, 0x24, 0xF2, 0xB0, 0x89,
+    0xAC, 0x91, 0x2C, 0x4C, 0x6C, 0x8A, 0x9B, 0x2D, 0xD9, 0xD8, 0xD8, 0x51, 0xD9, 0xD8, 0xD8, 0x79,
+
+    // bank 7, 138 bytes (remainder)
+    0xD9, 0xD8, 0xD8, 0xF1, 0x9E, 0x88, 0xA3, 0x31, 0xDA, 0xD8, 0xD8, 0x91, 0x2D, 0xD9, 0x28, 0xD8,
+    0x4D, 0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x83, 0x93, 0x35, 0x3D, 0x80, 0x25, 0xDA,
+    0xD8, 0xD8, 0x85, 0x69, 0xDA, 0xD8, 0xD8, 0xB4, 0x93, 0x81, 0xA3, 0x28, 0x34, 0x3C, 0xF3, 0xAB,
+    0x8B, 0xF8, 0xA3, 0x91, 0xB6, 0x09, 0xB4, 0xD9, 0xAB, 0xDE, 0xFA, 0xB0, 0x87, 0x9C, 0xB9, 0xA3,
+    0xDD, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x95, 0xF1, 0xA3, 0xA3, 0xA3, 0x9D, 0xF1, 0xA3, 0xA3, 0xA3,
+    0xA3, 0xF2, 0xA3, 0xB4, 0x90, 0x80, 0xF2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+    0xA3, 0xB2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xB0, 0x87, 0xB5, 0x99, 0xF1, 0xA3, 0xA3, 0xA3,
+    0x98, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x97, 0xA3, 0xA3, 0xA3, 0xA3, 0xF3, 0x9B, 0xA3, 0xA3, 0xDC,
+    0xB9, 0xA7, 0xF1, 0x26, 0x26, 0x26, 0xD8, 0xD8, 0xFF
+};
+
+// thanks to Noah Zerkin for piecing this stuff together!
+const unsigned char dmpConfig[MPU6050_DMP_CONFIG_SIZE] PROGMEM = {
+//  BANK    OFFSET  LENGTH  [DATA]
+    0x03,   0x7B,   0x03,   0x4C, 0xCD, 0x6C,         // FCFG_1 inv_set_gyro_calibration
+    0x03,   0xAB,   0x03,   0x36, 0x56, 0x76,         // FCFG_3 inv_set_gyro_calibration
+    0x00,   0x68,   0x04,   0x02, 0xCB, 0x47, 0xA2,   // D_0_104 inv_set_gyro_calibration
+    0x02,   0x18,   0x04,   0x00, 0x05, 0x8B, 0xC1,   // D_0_24 inv_set_gyro_calibration
+    0x01,   0x0C,   0x04,   0x00, 0x00, 0x00, 0x00,   // D_1_152 inv_set_accel_calibration
+    0x03,   0x7F,   0x06,   0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_accel_calibration
+    0x03,   0x89,   0x03,   0x26, 0x46, 0x66,         // FCFG_7 inv_set_accel_calibration
+    0x00,   0x6C,   0x02,   0x20, 0x00,               // D_0_108 inv_set_accel_calibration
+    0x02,   0x40,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_00 inv_set_compass_calibration
+    0x02,   0x44,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_01
+    0x02,   0x48,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_02
+    0x02,   0x4C,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_10
+    0x02,   0x50,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_11
+    0x02,   0x54,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_12
+    0x02,   0x58,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_20
+    0x02,   0x5C,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_21
+    0x02,   0xBC,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_22
+    0x01,   0xEC,   0x04,   0x00, 0x00, 0x40, 0x00,   // D_1_236 inv_apply_endian_accel
+    0x03,   0x7F,   0x06,   0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_mpu_sensors
+    0x04,   0x02,   0x03,   0x0D, 0x35, 0x5D,         // CFG_MOTION_BIAS inv_turn_on_bias_from_no_motion
+    0x04,   0x09,   0x04,   0x87, 0x2D, 0x35, 0x3D,   // FCFG_5 inv_set_bias_update
+    0x00,   0xA3,   0x01,   0x00,                     // D_0_163 inv_set_dead_zone
+                 // SPECIAL 0x01 = enable interrupts
+    0x00,   0x00,   0x00,   0x01, // SET INT_ENABLE at i=22, SPECIAL INSTRUCTION
+    0x07,   0x86,   0x01,   0xFE,                     // CFG_6 inv_set_fifo_interupt
+    0x07,   0x41,   0x05,   0xF1, 0x20, 0x28, 0x30, 0x38, // CFG_8 inv_send_quaternion
+    0x07,   0x7E,   0x01,   0x30,                     // CFG_16 inv_set_footer
+    0x07,   0x46,   0x01,   0x9A,                     // CFG_GYRO_SOURCE inv_send_gyro
+    0x07,   0x47,   0x04,   0xF1, 0x28, 0x30, 0x38,   // CFG_9 inv_send_gyro -> inv_construct3_fifo
+    0x07,   0x6C,   0x04,   0xF1, 0x28, 0x30, 0x38,   // CFG_12 inv_send_accel -> inv_construct3_fifo
+    0x02,   0x16,   0x02,   0x00, 0x02               //(0x07 -> 16Mhz) D_0_22 inv_set_fifo_rate (0x06 for first 8mhz board) (0x09 for 8Mhz board from Binoy)
+
+    // This very last 0x01 WAS a 0x09, which drops the FIFO rate down to 20 Hz. 0x07 is 25 Hz,
+    // 0x01 is 100Hz. Going faster than 100Hz (0x00=200Hz) tends to result in very noisy data.
+    // DMP output frequency is calculated easily using this equation: (200Hz / (1 + value))
+
+    // It is important to make sure the host processor can keep up with reading and processing
+    // the FIFO output at the desired rate. Handling FIFO overflow cleanly is also a good idea.
+};
+
+const unsigned char dmpUpdates[MPU6050_DMP_UPDATES_SIZE] PROGMEM = {
+    0x01,   0xB2,   0x02,   0xFF, 0xFF,
+    0x01,   0x90,   0x04,   0x09, 0x23, 0xA1, 0x35,
+    0x01,   0x6A,   0x02,   0x06, 0x00,
+    0x01,   0x60,   0x08,   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00,   0x60,   0x04,   0x40, 0x00, 0x00, 0x00,
+    0x01,   0x62,   0x02,   0x00, 0x00,
+    0x00,   0x60,   0x04,   0x00, 0x40, 0x00, 0x00
+};
+
+uint8_t MPU6050::dmpInitialize() {
+    // reset device
+    DEBUG_PRINTLN(F("\n\nResetting MPU6050..."));
+    reset();
+    delay(30); // wait after reset
+
+    // enable sleep mode and wake cycle
+    /*Serial.println(F("Enabling sleep mode..."));
+    setSleepEnabled(true);
+    Serial.println(F("Enabling wake cycle..."));
+    setWakeCycleEnabled(true);*/
+
+    // disable sleep mode
+    DEBUG_PRINTLN(F("Disabling sleep mode..."));
+    setSleepEnabled(false);
+
+    // get MPU hardware revision
+    DEBUG_PRINTLN(F("Selecting user bank 16..."));
+    setMemoryBank(0x10, true, true);
+    DEBUG_PRINTLN(F("Selecting memory byte 6..."));
+    setMemoryStartAddress(0x06);
+    DEBUG_PRINTLN(F("Checking hardware revision..."));
+    uint8_t hwRevision = readMemoryByte();
+    DEBUG_PRINT(F("Revision @ user[16][6] = "));
+    DEBUG_PRINTLNF(hwRevision, HEX);
+    DEBUG_PRINTLN(F("Resetting memory bank selection to 0..."));
+    setMemoryBank(0, false, false);
+
+    // check OTP bank valid
+    DEBUG_PRINTLN(F("Reading OTP bank valid flag..."));
+    uint8_t otpValid = getOTPBankValid();
+    DEBUG_PRINT(F("OTP bank is "));
+    DEBUG_PRINTLN(otpValid ? F("valid!") : F("invalid!"));
+
+    // get X/Y/Z gyro offsets
+    DEBUG_PRINTLN(F("Reading gyro offset TC values..."));
+    int8_t xgOffsetTC = getXGyroOffsetTC();
+    int8_t ygOffsetTC = getYGyroOffsetTC();
+    int8_t zgOffsetTC = getZGyroOffsetTC();
+    DEBUG_PRINT(F("X gyro offset = "));
+    DEBUG_PRINTLN(xgOffset);
+    DEBUG_PRINT(F("Y gyro offset = "));
+    DEBUG_PRINTLN(ygOffset);
+    DEBUG_PRINT(F("Z gyro offset = "));
+    DEBUG_PRINTLN(zgOffset);
+
+    // setup weird slave stuff (?)
+    DEBUG_PRINTLN(F("Setting slave 0 address to 0x7F..."));
+    setSlaveAddress(0, 0x7F);
+    DEBUG_PRINTLN(F("Disabling I2C Master mode..."));
+    setI2CMasterModeEnabled(false);
+    DEBUG_PRINTLN(F("Setting slave 0 address to 0x68 (self)..."));
+    setSlaveAddress(0, 0x68);
+    DEBUG_PRINTLN(F("Resetting I2C Master control..."));
+    resetI2CMaster();
+    delay(20);
+
+    // load DMP code into memory banks
+    DEBUG_PRINT(F("Writing DMP code to MPU memory banks ("));
+    DEBUG_PRINT(MPU6050_DMP_CODE_SIZE);
+    DEBUG_PRINTLN(F(" bytes)"));
+    if (writeProgMemoryBlock(dmpMemory, MPU6050_DMP_CODE_SIZE)) {
+        DEBUG_PRINTLN(F("Success! DMP code written and verified."));
+
+        // write DMP configuration
+        DEBUG_PRINT(F("Writing DMP configuration to MPU memory banks ("));
+        DEBUG_PRINT(MPU6050_DMP_CONFIG_SIZE);
+        DEBUG_PRINTLN(F(" bytes in config def)"));
+        if (writeProgDMPConfigurationSet(dmpConfig, MPU6050_DMP_CONFIG_SIZE)) {
+            DEBUG_PRINTLN(F("Success! DMP configuration written and verified."));
+
+            DEBUG_PRINTLN(F("Setting clock source to Z Gyro..."));
+            setClockSource(MPU6050_CLOCK_PLL_ZGYRO);
+
+            DEBUG_PRINTLN(F("Setting DMP and FIFO_OFLOW interrupts enabled..."));
+            setIntEnabled(0x12);
+
+            DEBUG_PRINTLN(F("Setting sample rate to 200Hz..."));
+            setRate(7); // 1khz / (1 + 4) = 200 Hz
+
+            DEBUG_PRINTLN(F("Setting external frame sync to TEMP_OUT_L[0]..."));
+            setExternalFrameSync(MPU6050_EXT_SYNC_TEMP_OUT_L);
+
+            DEBUG_PRINTLN(F("Setting DLPF bandwidth to 42Hz..."));
+            setDLPFMode(MPU6050_DLPF_BW_188);
+
+            DEBUG_PRINTLN(F("Setting gyro sensitivity to +/- 2000 deg/sec..."));
+            setFullScaleGyroRange(MPU6050_GYRO_FS_2000);
+
+            DEBUG_PRINTLN(F("Setting DMP configuration bytes (function unknown)..."));
+            setDMPConfig1(0x03);
+            setDMPConfig2(0x00);
+
+            DEBUG_PRINTLN(F("Clearing OTP Bank flag..."));
+            setOTPBankValid(false);
+
+            DEBUG_PRINTLN(F("Setting X/Y/Z gyro offset TCs to previous values..."));
+            setXGyroOffsetTC(xgOffsetTC);
+            setYGyroOffsetTC(ygOffsetTC);
+            setZGyroOffsetTC(zgOffsetTC);
+
+            //DEBUG_PRINTLN(F("Setting X/Y/Z gyro user offsets to zero..."));
+            //setXGyroOffset(0);
+            //setYGyroOffset(0);
+            //setZGyroOffset(0);
+
+            DEBUG_PRINTLN(F("Writing final memory update 1/7 (function unknown)..."));
+            uint8_t dmpUpdate[16], j;
+            uint16_t pos = 0;
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Writing final memory update 2/7 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Resetting FIFO..."));
+            resetFIFO();
+
+            DEBUG_PRINTLN(F("Reading FIFO count..."));
+            uint16_t fifoCount = getFIFOCount();
+            uint8_t fifoBuffer[128];
+
+            DEBUG_PRINT(F("Current FIFO count="));
+            DEBUG_PRINTLN(fifoCount);
+            getFIFOBytes(fifoBuffer, fifoCount);
+
+            DEBUG_PRINTLN(F("Setting motion detection threshold to 2..."));
+            setMotionDetectionThreshold(2);
+
+            DEBUG_PRINTLN(F("Setting zero-motion detection threshold to 156..."));
+            setZeroMotionDetectionThreshold(156);
+
+            DEBUG_PRINTLN(F("Setting motion detection duration to 80..."));
+            setMotionDetectionDuration(80);
+
+            DEBUG_PRINTLN(F("Setting zero-motion detection duration to 0..."));
+            setZeroMotionDetectionDuration(0);
+
+            DEBUG_PRINTLN(F("Resetting FIFO..."));
+            resetFIFO();
+
+            DEBUG_PRINTLN(F("Enabling FIFO..."));
+            setFIFOEnabled(true);
+
+            DEBUG_PRINTLN(F("Enabling DMP..."));
+            setDMPEnabled(true);
+
+            DEBUG_PRINTLN(F("Resetting DMP..."));
+            resetDMP();
+
+            DEBUG_PRINTLN(F("Writing final memory update 3/7 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Writing final memory update 4/7 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Writing final memory update 5/7 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Waiting for FIFO count > 2..."));
+            while ((fifoCount = getFIFOCount()) < 3);
+
+            DEBUG_PRINT(F("Current FIFO count="));
+            DEBUG_PRINTLN(fifoCount);
+            DEBUG_PRINTLN(F("Reading FIFO data..."));
+            getFIFOBytes(fifoBuffer, fifoCount);
+
+            DEBUG_PRINTLN(F("Reading interrupt status..."));
+            uint8_t mpuIntStatus = getIntStatus();
+
+            DEBUG_PRINT(F("Current interrupt status="));
+            DEBUG_PRINTLNF(mpuIntStatus, HEX);
+
+            DEBUG_PRINTLN(F("Reading final memory update 6/7 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            readMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Waiting for FIFO count > 2..."));
+            while ((fifoCount = getFIFOCount()) < 3);
+
+            DEBUG_PRINT(F("Current FIFO count="));
+            DEBUG_PRINTLN(fifoCount);
+
+            DEBUG_PRINTLN(F("Reading FIFO data..."));
+            getFIFOBytes(fifoBuffer, fifoCount);
+
+            DEBUG_PRINTLN(F("Reading interrupt status..."));
+            mpuIntStatus = getIntStatus();
+
+            DEBUG_PRINT(F("Current interrupt status="));
+            DEBUG_PRINTLNF(mpuIntStatus, HEX);
+
+            DEBUG_PRINTLN(F("Writing final memory update 7/7 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("DMP is good to go! Finally."));
+
+            DEBUG_PRINTLN(F("Disabling DMP (you turn it on later)..."));
+            setDMPEnabled(false);
+
+            DEBUG_PRINTLN(F("Setting up internal 42-byte (default) DMP packet buffer..."));
+            dmpPacketSize = 42;
+            /*if ((dmpPacketBuffer = (uint8_t *)malloc(42)) == 0) {
+                return 3; // TODO: proper error code for no memory
+            }*/
+
+            DEBUG_PRINTLN(F("Resetting FIFO and clearing INT status one last time..."));
+            resetFIFO();
+            getIntStatus();
+        } else {
+            DEBUG_PRINTLN(F("ERROR! DMP configuration verification failed."));
+            return 2; // configuration block loading failed
+        }
+    } else {
+        DEBUG_PRINTLN(F("ERROR! DMP code verification failed."));
+        return 1; // main binary block loading failed
+    }
+    return 0; // success
+}
+
+bool MPU6050::dmpPacketAvailable() {
+    return getFIFOCount() >= dmpGetFIFOPacketSize();
+}
+
+// uint8_t MPU6050::dmpSetFIFORate(uint8_t fifoRate);
+// uint8_t MPU6050::dmpGetFIFORate();
+// uint8_t MPU6050::dmpGetSampleStepSizeMS();
+// uint8_t MPU6050::dmpGetSampleFrequency();
+// int32_t MPU6050::dmpDecodeTemperature(int8_t tempReg);
+
+//uint8_t MPU6050::dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority);
+//uint8_t MPU6050::dmpUnregisterFIFORateProcess(inv_obj_func func);
+//uint8_t MPU6050::dmpRunFIFORateProcesses();
+
+// uint8_t MPU6050::dmpSendQuaternion(uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendPacketNumber(uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy);
+
+uint8_t MPU6050::dmpGetAccel(int32_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[28] << 24) + (packet[29] << 16) + (packet[30] << 8) + packet[31]);
+    data[1] = ((packet[32] << 24) + (packet[33] << 16) + (packet[34] << 8) + packet[35]);
+    data[2] = ((packet[36] << 24) + (packet[37] << 16) + (packet[38] << 8) + packet[39]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetAccel(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = (packet[28] << 8) + packet[29];
+    data[1] = (packet[32] << 8) + packet[33];
+    data[2] = (packet[36] << 8) + packet[37];
+    return 0;
+}
+uint8_t MPU6050::dmpGetAccel(VectorInt16 *v, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    v -> x = (packet[28] << 8) + packet[29];
+    v -> y = (packet[32] << 8) + packet[33];
+    v -> z = (packet[36] << 8) + packet[37];
+    return 0;
+}
+uint8_t MPU6050::dmpGetQuaternion(int32_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[0] << 24) + (packet[1] << 16) + (packet[2] << 8) + packet[3]);
+    data[1] = ((packet[4] << 24) + (packet[5] << 16) + (packet[6] << 8) + packet[7]);
+    data[2] = ((packet[8] << 24) + (packet[9] << 16) + (packet[10] << 8) + packet[11]);
+    data[3] = ((packet[12] << 24) + (packet[13] << 16) + (packet[14] << 8) + packet[15]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetQuaternion(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[0] << 8) + packet[1]);
+    data[1] = ((packet[4] << 8) + packet[5]);
+    data[2] = ((packet[8] << 8) + packet[9]);
+    data[3] = ((packet[12] << 8) + packet[13]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetQuaternion(Quaternion *q, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    int16_t qI[4];
+    uint8_t status = dmpGetQuaternion(qI, packet);
+    if (status == 0) {
+        q -> w = (float)qI[0] / 16384.0f;
+        q -> x = (float)qI[1] / 16384.0f;
+        q -> y = (float)qI[2] / 16384.0f;
+        q -> z = (float)qI[3] / 16384.0f;
+        return 0;
+    }
+    return status; // int16 return value, indicates error if this line is reached
+}
+// uint8_t MPU6050::dmpGet6AxisQuaternion(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetRelativeQuaternion(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetGyro(int32_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[16] << 24) + (packet[17] << 16) + (packet[18] << 8) + packet[19]);
+    data[1] = ((packet[20] << 24) + (packet[21] << 16) + (packet[22] << 8) + packet[23]);
+    data[2] = ((packet[24] << 24) + (packet[25] << 16) + (packet[26] << 8) + packet[27]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetGyro(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = (packet[16] << 8) + packet[17];
+    data[1] = (packet[20] << 8) + packet[21];
+    data[2] = (packet[24] << 8) + packet[25];
+    return 0;
+}
+// uint8_t MPU6050::dmpSetLinearAccelFilterCoefficient(float coef);
+// uint8_t MPU6050::dmpGetLinearAccel(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity) {
+    // get rid of the gravity component (+1g = +8192 in standard DMP FIFO packet, sensitivity is 2g)
+    v -> x = vRaw -> x - gravity -> x*8192;
+    v -> y = vRaw -> y - gravity -> y*8192;
+    v -> z = vRaw -> z - gravity -> z*8192;
+    return 0;
+}
+// uint8_t MPU6050::dmpGetLinearAccelInWorld(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q) {
+    // rotate measured 3D acceleration vector into original state
+    // frame of reference based on orientation quaternion
+    memcpy(v, vReal, sizeof(VectorInt16));
+    v -> rotate(q);
+    return 0;
+}
+// uint8_t MPU6050::dmpGetGyroAndAccelSensor(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetGyroSensor(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetControlData(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetTemperature(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetGravity(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetGravity(VectorFloat *v, Quaternion *q) {
+    v -> x = 2 * (q -> x*q -> z - q -> w*q -> y);
+    v -> y = 2 * (q -> w*q -> x + q -> y*q -> z);
+    v -> z = q -> w*q -> w - q -> x*q -> x - q -> y*q -> y + q -> z*q -> z;
+    return 0;
+}
+// uint8_t MPU6050::dmpGetUnquantizedAccel(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetQuantizedAccel(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetExternalSensorData(long *data, int size, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetEIS(long *data, const uint8_t* packet);
+
+uint8_t MPU6050::dmpGetEuler(float *data, Quaternion *q) {
+    data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1);   // psi
+    data[1] = -asin(2*q -> x*q -> z + 2*q -> w*q -> y);                              // theta
+    data[2] = atan2(2*q -> y*q -> z - 2*q -> w*q -> x, 2*q -> w*q -> w + 2*q -> z*q -> z - 1);   // phi
+    return 0;
+}
+uint8_t MPU6050::dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity) {
+    // yaw: (about Z axis)
+    data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1);
+    // pitch: (nose up/down, about Y axis)
+    data[1] = atan(gravity -> x / sqrt(gravity -> y*gravity -> y + gravity -> z*gravity -> z));
+    // roll: (tilt left/right, about X axis)
+    data[2] = atan(gravity -> y / sqrt(gravity -> x*gravity -> x + gravity -> z*gravity -> z));
+    return 0;
+}
+
+// uint8_t MPU6050::dmpGetAccelFloat(float *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetQuaternionFloat(float *data, const uint8_t* packet);
+
+uint8_t MPU6050::dmpProcessFIFOPacket(const unsigned char *dmpData) {
+    /*for (uint8_t k = 0; k < dmpPacketSize; k++) {
+        if (dmpData[k] < 0x10) Serial.print("0");
+        Serial.print(dmpData[k], HEX);
+        Serial.print(" ");
+    }
+    Serial.print("\n");*/
+    //Serial.println((uint16_t)dmpPacketBuffer);
+    return 0;
+}
+uint8_t MPU6050::dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed) {
+    uint8_t status;
+    uint8_t buf[dmpPacketSize];
+    for (uint8_t i = 0; i < numPackets; i++) {
+        // read packet from FIFO
+        getFIFOBytes(buf, dmpPacketSize);
+
+        // process packet
+        if ((status = dmpProcessFIFOPacket(buf)) > 0) return status;
+        
+        // increment external process count variable, if supplied
+        if (processed != 0) *processed++;
+    }
+    return 0;
+}
+
+// uint8_t MPU6050::dmpSetFIFOProcessedCallback(void (*func) (void));
+
+// uint8_t MPU6050::dmpInitFIFOParam();
+// uint8_t MPU6050::dmpCloseFIFO();
+// uint8_t MPU6050::dmpSetGyroDataSource(uint_fast8_t source);
+// uint8_t MPU6050::dmpDecodeQuantizedAccel();
+// uint32_t MPU6050::dmpGetGyroSumOfSquare();
+// uint32_t MPU6050::dmpGetAccelSumOfSquare();
+// void MPU6050::dmpOverrideQuaternion(long *q);
+uint16_t MPU6050::dmpGetFIFOPacketSize() {
+    return dmpPacketSize;
+}
+
+#endif /* _MPU6050_6AXIS_MOTIONAPPS20_H_ */

libraries/MPU6050/MPU6050_9Axis_MotionApps41.h

@@ -0,0 +1,852 @@
+// I2Cdev library collection - MPU6050 I2C device class, 9-axis MotionApps 4.1 implementation
+// Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00)
+// 6/18/2012 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//     ... - ongoing debug release
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2012 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+#ifndef _MPU6050_9AXIS_MOTIONAPPS41_H_
+#define _MPU6050_9AXIS_MOTIONAPPS41_H_
+
+#include "I2Cdev.h"
+#include "helper_3dmath.h"
+
+// MotionApps 4.1 DMP implementation, built using the MPU-9150 "MotionFit" board
+#define MPU6050_INCLUDE_DMP_MOTIONAPPS41
+
+#include "MPU6050.h"
+
+// Tom Carpenter's conditional PROGMEM code
+// http://forum.arduino.cc/index.php?topic=129407.0
+#ifndef __arm__
+    #include <avr/pgmspace.h>
+#else
+    // Teensy 3.0 library conditional PROGMEM code from Paul Stoffregen
+    #ifndef __PGMSPACE_H_
+        #define __PGMSPACE_H_ 1
+        #include <inttypes.h>
+
+        #define PROGMEM
+        #define PGM_P  const char *
+        #define PSTR(str) (str)
+        #define F(x) x
+
+        typedef void prog_void;
+        typedef char prog_char;
+        typedef unsigned char prog_uchar;
+        typedef int8_t prog_int8_t;
+        typedef uint8_t prog_uint8_t;
+        typedef int16_t prog_int16_t;
+        typedef uint16_t prog_uint16_t;
+        typedef int32_t prog_int32_t;
+        typedef uint32_t prog_uint32_t;
+        
+        #define strcpy_P(dest, src) strcpy((dest), (src))
+        #define strcat_P(dest, src) strcat((dest), (src))
+        #define strcmp_P(a, b) strcmp((a), (b))
+        
+        #define pgm_read_byte(addr) (*(const unsigned char *)(addr))
+        #define pgm_read_word(addr) (*(const unsigned short *)(addr))
+        #define pgm_read_dword(addr) (*(const unsigned long *)(addr))
+        #define pgm_read_float(addr) (*(const float *)(addr))
+        
+        #define pgm_read_byte_near(addr) pgm_read_byte(addr)
+        #define pgm_read_word_near(addr) pgm_read_word(addr)
+        #define pgm_read_dword_near(addr) pgm_read_dword(addr)
+        #define pgm_read_float_near(addr) pgm_read_float(addr)
+        #define pgm_read_byte_far(addr) pgm_read_byte(addr)
+        #define pgm_read_word_far(addr) pgm_read_word(addr)
+        #define pgm_read_dword_far(addr) pgm_read_dword(addr)
+        #define pgm_read_float_far(addr) pgm_read_float(addr)
+    #endif
+#endif
+
+// NOTE! Enabling DEBUG adds about 3.3kB to the flash program size.
+// Debug output is now working even on ATMega328P MCUs (e.g. Arduino Uno)
+// after moving string constants to flash memory storage using the F()
+// compiler macro (Arduino IDE 1.0+ required).
+
+//#define DEBUG
+#ifdef DEBUG
+    #define DEBUG_PRINT(x) Serial.print(x)
+    #define DEBUG_PRINTF(x, y) Serial.print(x, y)
+    #define DEBUG_PRINTLN(x) Serial.println(x)
+    #define DEBUG_PRINTLNF(x, y) Serial.println(x, y)
+#else
+    #define DEBUG_PRINT(x)
+    #define DEBUG_PRINTF(x, y)
+    #define DEBUG_PRINTLN(x)
+    #define DEBUG_PRINTLNF(x, y)
+#endif
+
+#define MPU6050_DMP_CODE_SIZE       1962    // dmpMemory[]
+#define MPU6050_DMP_CONFIG_SIZE     232     // dmpConfig[]
+#define MPU6050_DMP_UPDATES_SIZE    140     // dmpUpdates[]
+
+/* ================================================================================================ *
+ | Default MotionApps v4.1 48-byte FIFO packet structure:                                           |
+ |                                                                                                  |
+ | [QUAT W][      ][QUAT X][      ][QUAT Y][      ][QUAT Z][      ][GYRO X][      ][GYRO Y][      ] |
+ |   0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  |
+ |                                                                                                  |
+ | [GYRO Z][      ][MAG X ][MAG Y ][MAG Z ][ACC X ][      ][ACC Y ][      ][ACC Z ][      ][      ] |
+ |  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  |
+ * ================================================================================================ */
+
+// this block of memory gets written to the MPU on start-up, and it seems
+// to be volatile memory, so it has to be done each time (it only takes ~1
+// second though)
+const prog_uchar dmpMemory[MPU6050_DMP_CODE_SIZE] PROGMEM = {
+    // bank 0, 256 bytes
+    0xFB, 0x00, 0x00, 0x3E, 0x00, 0x0B, 0x00, 0x36, 0x00, 0x01, 0x00, 0x02, 0x00, 0x03, 0x00, 0x00,
+    0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0xFA, 0x80, 0x00, 0x0B, 0x12, 0x82, 0x00, 0x01,
+    0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x28, 0x00, 0x00, 0xFF, 0xFF, 0x45, 0x81, 0xFF, 0xFF, 0xFA, 0x72, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x03, 0xE8, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x7F, 0xFF, 0xFF, 0xFE, 0x80, 0x01,
+    0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x3E, 0x03, 0x30, 0x40, 0x00, 0x00, 0x00, 0x02, 0xCA, 0xE3, 0x09, 0x3E, 0x80, 0x00, 0x00,
+    0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00,
+    0x41, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x0B, 0x2A, 0x00, 0x00, 0x16, 0x55, 0x00, 0x00, 0x21, 0x82,
+    0xFD, 0x87, 0x26, 0x50, 0xFD, 0x80, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x05, 0x80, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x6F, 0x00, 0x02, 0x65, 0x32, 0x00, 0x00, 0x5E, 0xC0,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xFB, 0x8C, 0x6F, 0x5D, 0xFD, 0x5D, 0x08, 0xD9, 0x00, 0x7C, 0x73, 0x3B, 0x00, 0x6C, 0x12, 0xCC,
+    0x32, 0x00, 0x13, 0x9D, 0x32, 0x00, 0xD0, 0xD6, 0x32, 0x00, 0x08, 0x00, 0x40, 0x00, 0x01, 0xF4,
+    0xFF, 0xE6, 0x80, 0x79, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xD6, 0x00, 0x00, 0x27, 0x10,
+
+    // bank 1, 256 bytes
+    0xFB, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0xFA, 0x36, 0xFF, 0xBC, 0x30, 0x8E, 0x00, 0x05, 0xFB, 0xF0, 0xFF, 0xD9, 0x5B, 0xC8,
+    0xFF, 0xD0, 0x9A, 0xBE, 0x00, 0x00, 0x10, 0xA9, 0xFF, 0xF4, 0x1E, 0xB2, 0x00, 0xCE, 0xBB, 0xF7,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04, 0x00, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00, 0x0C,
+    0xFF, 0xC2, 0x80, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0xCF, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x14,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x03, 0x3F, 0x68, 0xB6, 0x79, 0x35, 0x28, 0xBC, 0xC6, 0x7E, 0xD1, 0x6C,
+    0x80, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB2, 0x6A, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xF0, 0x00, 0x00, 0x00, 0x30,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x25, 0x4D, 0x00, 0x2F, 0x70, 0x6D, 0x00, 0x00, 0x05, 0xAE, 0x00, 0x0C, 0x02, 0xD0,
+    
+    // bank 2, 256 bytes
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x54, 0xFF, 0xEF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x00, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x01, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x65, 0x00, 0x00, 0x00, 0x54, 0x00, 0x00, 0xFF, 0xEF, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00,
+    0x00, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x78, 0xA2,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    
+    // bank 3, 256 bytes
+    0xD8, 0xDC, 0xF4, 0xD8, 0xB9, 0xAB, 0xF3, 0xF8, 0xFA, 0xF1, 0xBA, 0xA2, 0xDE, 0xB2, 0xB8, 0xB4,
+    0xA8, 0x81, 0x98, 0xF7, 0x4A, 0x90, 0x7F, 0x91, 0x6A, 0xF3, 0xF9, 0xDB, 0xA8, 0xF9, 0xB0, 0xBA,
+    0xA0, 0x80, 0xF2, 0xCE, 0x81, 0xF3, 0xC2, 0xF1, 0xC1, 0xF2, 0xC3, 0xF3, 0xCC, 0xA2, 0xB2, 0x80,
+    0xF1, 0xC6, 0xD8, 0x80, 0xBA, 0xA7, 0xDF, 0xDF, 0xDF, 0xF2, 0xA7, 0xC3, 0xCB, 0xC5, 0xB6, 0xF0,
+    0x87, 0xA2, 0x94, 0x24, 0x48, 0x70, 0x3C, 0x95, 0x40, 0x68, 0x34, 0x58, 0x9B, 0x78, 0xA2, 0xF1,
+    0x83, 0x92, 0x2D, 0x55, 0x7D, 0xD8, 0xB1, 0xB4, 0xB8, 0xA1, 0xD0, 0x91, 0x80, 0xF2, 0x70, 0xF3,
+    0x70, 0xF2, 0x7C, 0x80, 0xA8, 0xF1, 0x01, 0xB0, 0x98, 0x87, 0xD9, 0x43, 0xD8, 0x86, 0xC9, 0x88,
+    0xBA, 0xA1, 0xF2, 0x0E, 0xB8, 0x97, 0x80, 0xF1, 0xA9, 0xDF, 0xDF, 0xDF, 0xAA, 0xDF, 0xDF, 0xDF,
+    0xF2, 0xAA, 0xC5, 0xCD, 0xC7, 0xA9, 0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, 0x97, 0xF1, 0xA9, 0x89,
+    0x26, 0x46, 0x66, 0xB0, 0xB4, 0xBA, 0x80, 0xAC, 0xDE, 0xF2, 0xCA, 0xF1, 0xB2, 0x8C, 0x02, 0xA9,
+    0xB6, 0x98, 0x00, 0x89, 0x0E, 0x16, 0x1E, 0xB8, 0xA9, 0xB4, 0x99, 0x2C, 0x54, 0x7C, 0xB0, 0x8A,
+    0xA8, 0x96, 0x36, 0x56, 0x76, 0xF1, 0xB9, 0xAF, 0xB4, 0xB0, 0x83, 0xC0, 0xB8, 0xA8, 0x97, 0x11,
+    0xB1, 0x8F, 0x98, 0xB9, 0xAF, 0xF0, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xF1, 0xA3, 0x29, 0x55,
+    0x7D, 0xAF, 0x83, 0xB5, 0x93, 0xF0, 0x00, 0x28, 0x50, 0xF5, 0xBA, 0xAD, 0x8F, 0x9F, 0x28, 0x54,
+    0x7C, 0xB9, 0xF1, 0xA3, 0x86, 0x9F, 0x61, 0xA6, 0xDA, 0xDE, 0xDF, 0xDB, 0xB2, 0xB6, 0x8E, 0x9D,
+    0xAE, 0xF5, 0x60, 0x68, 0x70, 0xB1, 0xB5, 0xF1, 0xDA, 0xA6, 0xDF, 0xD9, 0xA6, 0xFA, 0xA3, 0x86,
+    
+    // bank 4, 256 bytes
+    0x96, 0xDB, 0x31, 0xA6, 0xD9, 0xF8, 0xDF, 0xBA, 0xA6, 0x8F, 0xC2, 0xC5, 0xC7, 0xB2, 0x8C, 0xC1,
+    0xB8, 0xA2, 0xDF, 0xDF, 0xDF, 0xA3, 0xDF, 0xDF, 0xDF, 0xD8, 0xD8, 0xF1, 0xB8, 0xA8, 0xB2, 0x86,
+    0xB4, 0x98, 0x0D, 0x35, 0x5D, 0xB8, 0xAA, 0x98, 0xB0, 0x87, 0x2D, 0x35, 0x3D, 0xB2, 0xB6, 0xBA,
+    0xAF, 0x8C, 0x96, 0x19, 0x8F, 0x9F, 0xA7, 0x0E, 0x16, 0x1E, 0xB4, 0x9A, 0xB8, 0xAA, 0x87, 0x2C,
+    0x54, 0x7C, 0xB9, 0xA3, 0xDE, 0xDF, 0xDF, 0xA3, 0xB1, 0x80, 0xF2, 0xC4, 0xCD, 0xC9, 0xF1, 0xB8,
+    0xA9, 0xB4, 0x99, 0x83, 0x0D, 0x35, 0x5D, 0x89, 0xB9, 0xA3, 0x2D, 0x55, 0x7D, 0xB5, 0x93, 0xA3,
+    0x0E, 0x16, 0x1E, 0xA9, 0x2C, 0x54, 0x7C, 0xB8, 0xB4, 0xB0, 0xF1, 0x97, 0x83, 0xA8, 0x11, 0x84,
+    0xA5, 0x09, 0x98, 0xA3, 0x83, 0xF0, 0xDA, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xD8, 0xF1, 0xA5,
+    0x29, 0x55, 0x7D, 0xA5, 0x85, 0x95, 0x02, 0x1A, 0x2E, 0x3A, 0x56, 0x5A, 0x40, 0x48, 0xF9, 0xF3,
+    0xA3, 0xD9, 0xF8, 0xF0, 0x98, 0x83, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0x97, 0x82, 0xA8, 0xF1,
+    0x11, 0xF0, 0x98, 0xA2, 0x24, 0x08, 0x44, 0x10, 0x64, 0x18, 0xDA, 0xF3, 0xDE, 0xD8, 0x83, 0xA5,
+    0x94, 0x01, 0xD9, 0xA3, 0x02, 0xF1, 0xA2, 0xC3, 0xC5, 0xC7, 0xD8, 0xF1, 0x84, 0x92, 0xA2, 0x4D,
+    0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9,
+    0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0x93, 0xA3, 0x4D,
+    0xDA, 0x2A, 0xD8, 0x48, 0x69, 0xD9, 0x2A, 0xD8, 0x68, 0x55, 0xDA, 0x32, 0xD8, 0x50, 0x71, 0xD9,
+    0x32, 0xD8, 0x70, 0x5D, 0xDA, 0x3A, 0xD8, 0x58, 0x79, 0xD9, 0x3A, 0xD8, 0x78, 0xA8, 0x8A, 0x9A,
+    
+    // bank 5, 256 bytes
+    0xF0, 0x28, 0x50, 0x78, 0x9E, 0xF3, 0x88, 0x18, 0xF1, 0x9F, 0x1D, 0x98, 0xA8, 0xD9, 0x08, 0xD8,
+    0xC8, 0x9F, 0x12, 0x9E, 0xF3, 0x15, 0xA8, 0xDA, 0x12, 0x10, 0xD8, 0xF1, 0xAF, 0xC8, 0x97, 0x87,
+    0x34, 0xB5, 0xB9, 0x94, 0xA4, 0x21, 0xF3, 0xD9, 0x22, 0xD8, 0xF2, 0x2D, 0xF3, 0xD9, 0x2A, 0xD8,
+    0xF2, 0x35, 0xF3, 0xD9, 0x32, 0xD8, 0x81, 0xA4, 0x60, 0x60, 0x61, 0xD9, 0x61, 0xD8, 0x6C, 0x68,
+    0x69, 0xD9, 0x69, 0xD8, 0x74, 0x70, 0x71, 0xD9, 0x71, 0xD8, 0xB1, 0xA3, 0x84, 0x19, 0x3D, 0x5D,
+    0xA3, 0x83, 0x1A, 0x3E, 0x5E, 0x93, 0x10, 0x30, 0x81, 0x10, 0x11, 0xB8, 0xB0, 0xAF, 0x8F, 0x94,
+    0xF2, 0xDA, 0x3E, 0xD8, 0xB4, 0x9A, 0xA8, 0x87, 0x29, 0xDA, 0xF8, 0xD8, 0x87, 0x9A, 0x35, 0xDA,
+    0xF8, 0xD8, 0x87, 0x9A, 0x3D, 0xDA, 0xF8, 0xD8, 0xB1, 0xB9, 0xA4, 0x98, 0x85, 0x02, 0x2E, 0x56,
+    0xA5, 0x81, 0x00, 0x0C, 0x14, 0xA3, 0x97, 0xB0, 0x8A, 0xF1, 0x2D, 0xD9, 0x28, 0xD8, 0x4D, 0xD9,
+    0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x84, 0x0D, 0xDA, 0x0E, 0xD8, 0xA3, 0x29, 0x83, 0xDA,
+    0x2C, 0x0E, 0xD8, 0xA3, 0x84, 0x49, 0x83, 0xDA, 0x2C, 0x4C, 0x0E, 0xD8, 0xB8, 0xB0, 0x97, 0x86,
+    0xA8, 0x31, 0x9B, 0x06, 0x99, 0x07, 0xAB, 0x97, 0x28, 0x88, 0x9B, 0xF0, 0x0C, 0x20, 0x14, 0x40,
+    0xB9, 0xA3, 0x8A, 0xC3, 0xC5, 0xC7, 0x9A, 0xA3, 0x28, 0x50, 0x78, 0xF1, 0xB5, 0x93, 0x01, 0xD9,
+    0xDF, 0xDF, 0xDF, 0xD8, 0xB8, 0xB4, 0xA8, 0x8C, 0x9C, 0xF0, 0x04, 0x28, 0x51, 0x79, 0x1D, 0x30,
+    0x14, 0x38, 0xB2, 0x82, 0xAB, 0xD0, 0x98, 0x2C, 0x50, 0x50, 0x78, 0x78, 0x9B, 0xF1, 0x1A, 0xB0,
+    0xF0, 0xB1, 0x83, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0xB0, 0x8B, 0x29, 0x51, 0x79, 0xB1, 0x83, 0x24,
+
+    // bank 6, 256 bytes
+    0x70, 0x59, 0xB0, 0x8B, 0x20, 0x58, 0x71, 0xB1, 0x83, 0x44, 0x69, 0x38, 0xB0, 0x8B, 0x39, 0x40,
+    0x68, 0xB1, 0x83, 0x64, 0x48, 0x31, 0xB0, 0x8B, 0x30, 0x49, 0x60, 0xA5, 0x88, 0x20, 0x09, 0x71,
+    0x58, 0x44, 0x68, 0x11, 0x39, 0x64, 0x49, 0x30, 0x19, 0xF1, 0xAC, 0x00, 0x2C, 0x54, 0x7C, 0xF0,
+    0x8C, 0xA8, 0x04, 0x28, 0x50, 0x78, 0xF1, 0x88, 0x97, 0x26, 0xA8, 0x59, 0x98, 0xAC, 0x8C, 0x02,
+    0x26, 0x46, 0x66, 0xF0, 0x89, 0x9C, 0xA8, 0x29, 0x51, 0x79, 0x24, 0x70, 0x59, 0x44, 0x69, 0x38,
+    0x64, 0x48, 0x31, 0xA9, 0x88, 0x09, 0x20, 0x59, 0x70, 0xAB, 0x11, 0x38, 0x40, 0x69, 0xA8, 0x19,
+    0x31, 0x48, 0x60, 0x8C, 0xA8, 0x3C, 0x41, 0x5C, 0x20, 0x7C, 0x00, 0xF1, 0x87, 0x98, 0x19, 0x86,
+    0xA8, 0x6E, 0x76, 0x7E, 0xA9, 0x99, 0x88, 0x2D, 0x55, 0x7D, 0x9E, 0xB9, 0xA3, 0x8A, 0x22, 0x8A,
+    0x6E, 0x8A, 0x56, 0x8A, 0x5E, 0x9F, 0xB1, 0x83, 0x06, 0x26, 0x46, 0x66, 0x0E, 0x2E, 0x4E, 0x6E,
+    0x9D, 0xB8, 0xAD, 0x00, 0x2C, 0x54, 0x7C, 0xF2, 0xB1, 0x8C, 0xB4, 0x99, 0xB9, 0xA3, 0x2D, 0x55,
+    0x7D, 0x81, 0x91, 0xAC, 0x38, 0xAD, 0x3A, 0xB5, 0x83, 0x91, 0xAC, 0x2D, 0xD9, 0x28, 0xD8, 0x4D,
+    0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0x8C, 0x9D, 0xAE, 0x29, 0xD9, 0x04, 0xAE, 0xD8, 0x51,
+    0xD9, 0x04, 0xAE, 0xD8, 0x79, 0xD9, 0x04, 0xD8, 0x81, 0xF3, 0x9D, 0xAD, 0x00, 0x8D, 0xAE, 0x19,
+    0x81, 0xAD, 0xD9, 0x01, 0xD8, 0xF2, 0xAE, 0xDA, 0x26, 0xD8, 0x8E, 0x91, 0x29, 0x83, 0xA7, 0xD9,
+    0xAD, 0xAD, 0xAD, 0xAD, 0xF3, 0x2A, 0xD8, 0xD8, 0xF1, 0xB0, 0xAC, 0x89, 0x91, 0x3E, 0x5E, 0x76,
+    0xF3, 0xAC, 0x2E, 0x2E, 0xF1, 0xB1, 0x8C, 0x5A, 0x9C, 0xAC, 0x2C, 0x28, 0x28, 0x28, 0x9C, 0xAC,
+    
+    // bank 7, 170 bytes (remainder)
+    0x30, 0x18, 0xA8, 0x98, 0x81, 0x28, 0x34, 0x3C, 0x97, 0x24, 0xA7, 0x28, 0x34, 0x3C, 0x9C, 0x24,
+    0xF2, 0xB0, 0x89, 0xAC, 0x91, 0x2C, 0x4C, 0x6C, 0x8A, 0x9B, 0x2D, 0xD9, 0xD8, 0xD8, 0x51, 0xD9,
+    0xD8, 0xD8, 0x79, 0xD9, 0xD8, 0xD8, 0xF1, 0x9E, 0x88, 0xA3, 0x31, 0xDA, 0xD8, 0xD8, 0x91, 0x2D,
+    0xD9, 0x28, 0xD8, 0x4D, 0xD9, 0x48, 0xD8, 0x6D, 0xD9, 0x68, 0xD8, 0xB1, 0x83, 0x93, 0x35, 0x3D,
+    0x80, 0x25, 0xDA, 0xD8, 0xD8, 0x85, 0x69, 0xDA, 0xD8, 0xD8, 0xB4, 0x93, 0x81, 0xA3, 0x28, 0x34,
+    0x3C, 0xF3, 0xAB, 0x8B, 0xA3, 0x91, 0xB6, 0x09, 0xB4, 0xD9, 0xAB, 0xDE, 0xB0, 0x87, 0x9C, 0xB9,
+    0xA3, 0xDD, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x95, 0xF1, 0xA3, 0xA3, 0xA3, 0x9D, 0xF1, 0xA3, 0xA3,
+    0xA3, 0xA3, 0xF2, 0xA3, 0xB4, 0x90, 0x80, 0xF2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+    0xA3, 0xA3, 0xB2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xB0, 0x87, 0xB5, 0x99, 0xF1, 0xA3, 0xA3,
+    0xA3, 0x98, 0xF1, 0xA3, 0xA3, 0xA3, 0xA3, 0x97, 0xA3, 0xA3, 0xA3, 0xA3, 0xF3, 0x9B, 0xA3, 0xA3,
+    0xDC, 0xB9, 0xA7, 0xF1, 0x26, 0x26, 0x26, 0xD8, 0xD8, 0xFF
+};
+
+const prog_uchar dmpConfig[MPU6050_DMP_CONFIG_SIZE] PROGMEM = {
+//  BANK    OFFSET  LENGTH  [DATA]
+    0x02,   0xEC,   0x04,   0x00, 0x47, 0x7D, 0x1A,   // ?
+    0x03,   0x82,   0x03,   0x4C, 0xCD, 0x6C,         // FCFG_1 inv_set_gyro_calibration
+    0x03,   0xB2,   0x03,   0x36, 0x56, 0x76,         // FCFG_3 inv_set_gyro_calibration
+    0x00,   0x68,   0x04,   0x02, 0xCA, 0xE3, 0x09,   // D_0_104 inv_set_gyro_calibration
+    0x01,   0x0C,   0x04,   0x00, 0x00, 0x00, 0x00,   // D_1_152 inv_set_accel_calibration
+    0x03,   0x86,   0x03,   0x0C, 0xC9, 0x2C,         // FCFG_2 inv_set_accel_calibration
+    0x03,   0x90,   0x03,   0x26, 0x46, 0x66,         //   (continued)...FCFG_2 inv_set_accel_calibration
+    0x00,   0x6C,   0x02,   0x40, 0x00,               // D_0_108 inv_set_accel_calibration
+
+    0x02,   0x40,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_00 inv_set_compass_calibration
+    0x02,   0x44,   0x04,   0x40, 0x00, 0x00, 0x00,   // CPASS_MTX_01
+    0x02,   0x48,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_02
+    0x02,   0x4C,   0x04,   0x40, 0x00, 0x00, 0x00,   // CPASS_MTX_10
+    0x02,   0x50,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_11
+    0x02,   0x54,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_12
+    0x02,   0x58,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_20
+    0x02,   0x5C,   0x04,   0x00, 0x00, 0x00, 0x00,   // CPASS_MTX_21
+    0x02,   0xBC,   0x04,   0xC0, 0x00, 0x00, 0x00,   // CPASS_MTX_22
+
+    0x01,   0xEC,   0x04,   0x00, 0x00, 0x40, 0x00,   // D_1_236 inv_apply_endian_accel
+    0x03,   0x86,   0x06,   0x0C, 0xC9, 0x2C, 0x97, 0x97, 0x97, // FCFG_2 inv_set_mpu_sensors
+    0x04,   0x22,   0x03,   0x0D, 0x35, 0x5D,         // CFG_MOTION_BIAS inv_turn_on_bias_from_no_motion
+    0x00,   0xA3,   0x01,   0x00,                     // ?
+    0x04,   0x29,   0x04,   0x87, 0x2D, 0x35, 0x3D,   // FCFG_5 inv_set_bias_update
+    0x07,   0x62,   0x05,   0xF1, 0x20, 0x28, 0x30, 0x38, // CFG_8 inv_send_quaternion
+    0x07,   0x9F,   0x01,   0x30,                     // CFG_16 inv_set_footer
+    0x07,   0x67,   0x01,   0x9A,                     // CFG_GYRO_SOURCE inv_send_gyro
+    0x07,   0x68,   0x04,   0xF1, 0x28, 0x30, 0x38,   // CFG_9 inv_send_gyro -> inv_construct3_fifo
+    0x07,   0x62,   0x05,   0xF1, 0x20, 0x28, 0x30, 0x38, // ?
+    0x02,   0x0C,   0x04,   0x00, 0x00, 0x00, 0x00,   // ?
+    0x07,   0x83,   0x06,   0xC2, 0xCA, 0xC4, 0xA3, 0xA3, 0xA3, // ?
+                 // SPECIAL 0x01 = enable interrupts
+    0x00,   0x00,   0x00,   0x01, // SET INT_ENABLE, SPECIAL INSTRUCTION
+    0x07,   0xA7,   0x01,   0xFE,                     // ?
+    0x07,   0x62,   0x05,   0xF1, 0x20, 0x28, 0x30, 0x38, // ?
+    0x07,   0x67,   0x01,   0x9A,                     // ?
+    0x07,   0x68,   0x04,   0xF1, 0x28, 0x30, 0x38,   // CFG_12 inv_send_accel -> inv_construct3_fifo
+    0x07,   0x8D,   0x04,   0xF1, 0x28, 0x30, 0x38,   // ??? CFG_12 inv_send_mag -> inv_construct3_fifo
+    0x02,   0x16,   0x02,   0x00, 0x03                // D_0_22 inv_set_fifo_rate
+
+    // This very last 0x01 WAS a 0x09, which drops the FIFO rate down to 20 Hz. 0x07 is 25 Hz,
+    // 0x01 is 100Hz. Going faster than 100Hz (0x00=200Hz) tends to result in very noisy data.
+    // DMP output frequency is calculated easily using this equation: (200Hz / (1 + value))
+
+    // It is important to make sure the host processor can keep up with reading and processing
+    // the FIFO output at the desired rate. Handling FIFO overflow cleanly is also a good idea.
+};
+
+const prog_uchar dmpUpdates[MPU6050_DMP_UPDATES_SIZE] PROGMEM = {
+    0x01,   0xB2,   0x02,   0xFF, 0xF5,
+    0x01,   0x90,   0x04,   0x0A, 0x0D, 0x97, 0xC0,
+    0x00,   0xA3,   0x01,   0x00,
+    0x04,   0x29,   0x04,   0x87, 0x2D, 0x35, 0x3D,
+    0x01,   0x6A,   0x02,   0x06, 0x00,
+    0x01,   0x60,   0x08,   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00,   0x60,   0x04,   0x40, 0x00, 0x00, 0x00,
+    0x02,   0x60,   0x0C,   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01,   0x08,   0x02,   0x01, 0x20,
+    0x01,   0x0A,   0x02,   0x00, 0x4E,
+    0x01,   0x02,   0x02,   0xFE, 0xB3,
+    0x02,   0x6C,   0x04,   0x00, 0x00, 0x00, 0x00, // READ
+    0x02,   0x6C,   0x04,   0xFA, 0xFE, 0x00, 0x00,
+    0x02,   0x60,   0x0C,   0xFF, 0xFF, 0xCB, 0x4D, 0x00, 0x01, 0x08, 0xC1, 0xFF, 0xFF, 0xBC, 0x2C,
+    0x02,   0xF4,   0x04,   0x00, 0x00, 0x00, 0x00,
+    0x02,   0xF8,   0x04,   0x00, 0x00, 0x00, 0x00,
+    0x02,   0xFC,   0x04,   0x00, 0x00, 0x00, 0x00,
+    0x00,   0x60,   0x04,   0x40, 0x00, 0x00, 0x00,
+    0x00,   0x60,   0x04,   0x00, 0x40, 0x00, 0x00
+};
+
+uint8_t MPU6050::dmpInitialize() {
+    // reset device
+    DEBUG_PRINTLN(F("\n\nResetting MPU6050..."));
+    reset();
+    delay(30); // wait after reset
+
+    // disable sleep mode
+    DEBUG_PRINTLN(F("Disabling sleep mode..."));
+    setSleepEnabled(false);
+
+    // get MPU product ID
+    DEBUG_PRINTLN(F("Getting product ID..."));
+    //uint8_t productID = 0; //getProductID();
+    DEBUG_PRINT(F("Product ID = "));
+    DEBUG_PRINT(productID);
+
+    // get MPU hardware revision
+    DEBUG_PRINTLN(F("Selecting user bank 16..."));
+    setMemoryBank(0x10, true, true);
+    DEBUG_PRINTLN(F("Selecting memory byte 6..."));
+    setMemoryStartAddress(0x06);
+    DEBUG_PRINTLN(F("Checking hardware revision..."));
+    uint8_t hwRevision = readMemoryByte();
+    DEBUG_PRINT(F("Revision @ user[16][6] = "));
+    DEBUG_PRINTLNF(hwRevision, HEX);
+    DEBUG_PRINTLN(F("Resetting memory bank selection to 0..."));
+    setMemoryBank(0, false, false);
+
+    // check OTP bank valid
+    DEBUG_PRINTLN(F("Reading OTP bank valid flag..."));
+    uint8_t otpValid = getOTPBankValid();
+    DEBUG_PRINT(F("OTP bank is "));
+    DEBUG_PRINTLN(otpValid ? F("valid!") : F("invalid!"));
+
+    // get X/Y/Z gyro offsets
+    DEBUG_PRINTLN(F("Reading gyro offset values..."));
+    int8_t xgOffset = getXGyroOffset();
+    int8_t ygOffset = getYGyroOffset();
+    int8_t zgOffset = getZGyroOffset();
+    DEBUG_PRINT(F("X gyro offset = "));
+    DEBUG_PRINTLN(xgOffset);
+    DEBUG_PRINT(F("Y gyro offset = "));
+    DEBUG_PRINTLN(ygOffset);
+    DEBUG_PRINT(F("Z gyro offset = "));
+    DEBUG_PRINTLN(zgOffset);
+    
+    I2Cdev::readByte(devAddr, MPU6050_RA_USER_CTRL, buffer); // ?
+    
+    DEBUG_PRINTLN(F("Enabling interrupt latch, clear on any read, AUX bypass enabled"));
+    I2Cdev::writeByte(devAddr, MPU6050_RA_INT_PIN_CFG, 0x32);
+
+    // enable MPU AUX I2C bypass mode
+    //DEBUG_PRINTLN(F("Enabling AUX I2C bypass mode..."));
+    //setI2CBypassEnabled(true);
+
+    DEBUG_PRINTLN(F("Setting magnetometer mode to power-down..."));
+    //mag -> setMode(0);
+    I2Cdev::writeByte(0x0E, 0x0A, 0x00);
+
+    DEBUG_PRINTLN(F("Setting magnetometer mode to fuse access..."));
+    //mag -> setMode(0x0F);
+    I2Cdev::writeByte(0x0E, 0x0A, 0x0F);
+
+    DEBUG_PRINTLN(F("Reading mag magnetometer factory calibration..."));
+    int8_t asax, asay, asaz;
+    //mag -> getAdjustment(&asax, &asay, &asaz);
+    I2Cdev::readBytes(0x0E, 0x10, 3, buffer);
+    asax = (int8_t)buffer[0];
+    asay = (int8_t)buffer[1];
+    asaz = (int8_t)buffer[2];
+    DEBUG_PRINT(F("Adjustment X/Y/Z = "));
+    DEBUG_PRINT(asax);
+    DEBUG_PRINT(F(" / "));
+    DEBUG_PRINT(asay);
+    DEBUG_PRINT(F(" / "));
+    DEBUG_PRINTLN(asaz);
+
+    DEBUG_PRINTLN(F("Setting magnetometer mode to power-down..."));
+    //mag -> setMode(0);
+    I2Cdev::writeByte(0x0E, 0x0A, 0x00);
+
+    // load DMP code into memory banks
+    DEBUG_PRINT(F("Writing DMP code to MPU memory banks ("));
+    DEBUG_PRINT(MPU6050_DMP_CODE_SIZE);
+    DEBUG_PRINTLN(F(" bytes)"));
+    if (writeProgMemoryBlock(dmpMemory, MPU6050_DMP_CODE_SIZE)) {
+        DEBUG_PRINTLN(F("Success! DMP code written and verified."));
+
+        DEBUG_PRINTLN(F("Configuring DMP and related settings..."));
+
+        // write DMP configuration
+        DEBUG_PRINT(F("Writing DMP configuration to MPU memory banks ("));
+        DEBUG_PRINT(MPU6050_DMP_CONFIG_SIZE);
+        DEBUG_PRINTLN(F(" bytes in config def)"));
+        if (writeProgDMPConfigurationSet(dmpConfig, MPU6050_DMP_CONFIG_SIZE)) {
+            DEBUG_PRINTLN(F("Success! DMP configuration written and verified."));
+
+            DEBUG_PRINTLN(F("Setting DMP and FIFO_OFLOW interrupts enabled..."));
+            setIntEnabled(0x12);
+
+            DEBUG_PRINTLN(F("Setting sample rate to 200Hz..."));
+            setRate(4); // 1khz / (1 + 4) = 200 Hz
+
+            DEBUG_PRINTLN(F("Setting clock source to Z Gyro..."));
+            setClockSource(MPU6050_CLOCK_PLL_ZGYRO);
+
+            DEBUG_PRINTLN(F("Setting DLPF bandwidth to 42Hz..."));
+            setDLPFMode(MPU6050_DLPF_BW_42);
+
+            DEBUG_PRINTLN(F("Setting external frame sync to TEMP_OUT_L[0]..."));
+            setExternalFrameSync(MPU6050_EXT_SYNC_TEMP_OUT_L);
+
+            DEBUG_PRINTLN(F("Setting gyro sensitivity to +/- 2000 deg/sec..."));
+            setFullScaleGyroRange(MPU6050_GYRO_FS_2000);
+
+            DEBUG_PRINTLN(F("Setting DMP configuration bytes (function unknown)..."));
+            setDMPConfig1(0x03);
+            setDMPConfig2(0x00);
+
+            DEBUG_PRINTLN(F("Clearing OTP Bank flag..."));
+            setOTPBankValid(false);
+
+            DEBUG_PRINTLN(F("Setting X/Y/Z gyro offsets to previous values..."));
+            setXGyroOffset(xgOffset);
+            setYGyroOffset(ygOffset);
+            setZGyroOffset(zgOffset);
+
+            DEBUG_PRINTLN(F("Setting X/Y/Z gyro user offsets to zero..."));
+            setXGyroOffsetUser(0);
+            setYGyroOffsetUser(0);
+            setZGyroOffsetUser(0);
+
+            DEBUG_PRINTLN(F("Writing final memory update 1/19 (function unknown)..."));
+            uint8_t dmpUpdate[16], j;
+            uint16_t pos = 0;
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Writing final memory update 2/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Resetting FIFO..."));
+            resetFIFO();
+
+            DEBUG_PRINTLN(F("Reading FIFO count..."));
+            uint8_t fifoCount = getFIFOCount();
+
+            DEBUG_PRINT(F("Current FIFO count="));
+            DEBUG_PRINTLN(fifoCount);
+            uint8_t fifoBuffer[128];
+            //getFIFOBytes(fifoBuffer, fifoCount);
+
+            DEBUG_PRINTLN(F("Writing final memory update 3/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Writing final memory update 4/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Disabling all standby flags..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_PWR_MGMT_2, 0x00);
+
+            DEBUG_PRINTLN(F("Setting accelerometer sensitivity to +/- 2g..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_ACCEL_CONFIG, 0x00);
+
+            DEBUG_PRINTLN(F("Setting motion detection threshold to 2..."));
+            setMotionDetectionThreshold(2);
+
+            DEBUG_PRINTLN(F("Setting zero-motion detection threshold to 156..."));
+            setZeroMotionDetectionThreshold(156);
+
+            DEBUG_PRINTLN(F("Setting motion detection duration to 80..."));
+            setMotionDetectionDuration(80);
+
+            DEBUG_PRINTLN(F("Setting zero-motion detection duration to 0..."));
+            setZeroMotionDetectionDuration(0);
+
+            DEBUG_PRINTLN(F("Setting AK8975 to single measurement mode..."));
+            //mag -> setMode(1);
+            I2Cdev::writeByte(0x0E, 0x0A, 0x01);
+
+            // setup AK8975 (0x0E) as Slave 0 in read mode
+            DEBUG_PRINTLN(F("Setting up AK8975 read slave 0..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV0_ADDR, 0x8E);
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV0_REG,  0x01);
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV0_CTRL, 0xDA);
+
+            // setup AK8975 (0x0E) as Slave 2 in write mode
+            DEBUG_PRINTLN(F("Setting up AK8975 write slave 2..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV2_ADDR, 0x0E);
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV2_REG,  0x0A);
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV2_CTRL, 0x81);
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV2_DO,   0x01);
+
+            // setup I2C timing/delay control
+            DEBUG_PRINTLN(F("Setting up slave access delay..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_SLV4_CTRL, 0x18);
+            I2Cdev::writeByte(0x68, MPU6050_RA_I2C_MST_DELAY_CTRL, 0x05);
+
+            // enable interrupts
+            DEBUG_PRINTLN(F("Enabling default interrupt behavior/no bypass..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_INT_PIN_CFG, 0x00);
+
+            // enable I2C master mode and reset DMP/FIFO
+            DEBUG_PRINTLN(F("Enabling I2C master mode..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_USER_CTRL, 0x20);
+            DEBUG_PRINTLN(F("Resetting FIFO..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_USER_CTRL, 0x24);
+            DEBUG_PRINTLN(F("Rewriting I2C master mode enabled because...I don't know"));
+            I2Cdev::writeByte(0x68, MPU6050_RA_USER_CTRL, 0x20);
+            DEBUG_PRINTLN(F("Enabling and resetting DMP/FIFO..."));
+            I2Cdev::writeByte(0x68, MPU6050_RA_USER_CTRL, 0xE8);
+
+            DEBUG_PRINTLN(F("Writing final memory update 5/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 6/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 7/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 8/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 9/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 10/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 11/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            
+            DEBUG_PRINTLN(F("Reading final memory update 12/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            readMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            #ifdef DEBUG
+                DEBUG_PRINT(F("Read bytes: "));
+                for (j = 0; j < 4; j++) {
+                    DEBUG_PRINTF(dmpUpdate[3 + j], HEX);
+                    DEBUG_PRINT(" ");
+                }
+                DEBUG_PRINTLN("");
+            #endif
+
+            DEBUG_PRINTLN(F("Writing final memory update 13/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 14/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 15/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 16/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+            DEBUG_PRINTLN(F("Writing final memory update 17/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Waiting for FIRO count >= 46..."));
+            while ((fifoCount = getFIFOCount()) < 46);
+            DEBUG_PRINTLN(F("Reading FIFO..."));
+            getFIFOBytes(fifoBuffer, min(fifoCount, 128)); // safeguard only 128 bytes
+            DEBUG_PRINTLN(F("Reading interrupt status..."));
+            getIntStatus();
+
+            DEBUG_PRINTLN(F("Writing final memory update 18/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Waiting for FIRO count >= 48..."));
+            while ((fifoCount = getFIFOCount()) < 48);
+            DEBUG_PRINTLN(F("Reading FIFO..."));
+            getFIFOBytes(fifoBuffer, min(fifoCount, 128)); // safeguard only 128 bytes
+            DEBUG_PRINTLN(F("Reading interrupt status..."));
+            getIntStatus();
+            DEBUG_PRINTLN(F("Waiting for FIRO count >= 48..."));
+            while ((fifoCount = getFIFOCount()) < 48);
+            DEBUG_PRINTLN(F("Reading FIFO..."));
+            getFIFOBytes(fifoBuffer, min(fifoCount, 128)); // safeguard only 128 bytes
+            DEBUG_PRINTLN(F("Reading interrupt status..."));
+            getIntStatus();
+
+            DEBUG_PRINTLN(F("Writing final memory update 19/19 (function unknown)..."));
+            for (j = 0; j < 4 || j < dmpUpdate[2] + 3; j++, pos++) dmpUpdate[j] = pgm_read_byte(&dmpUpdates[pos]);
+            writeMemoryBlock(dmpUpdate + 3, dmpUpdate[2], dmpUpdate[0], dmpUpdate[1]);
+
+            DEBUG_PRINTLN(F("Disabling DMP (you turn it on later)..."));
+            setDMPEnabled(false);
+
+            DEBUG_PRINTLN(F("Setting up internal 48-byte (default) DMP packet buffer..."));
+            dmpPacketSize = 48;
+            /*if ((dmpPacketBuffer = (uint8_t *)malloc(42)) == 0) {
+                return 3; // TODO: proper error code for no memory
+            }*/
+
+            DEBUG_PRINTLN(F("Resetting FIFO and clearing INT status one last time..."));
+            resetFIFO();
+            getIntStatus();
+        } else {
+            DEBUG_PRINTLN(F("ERROR! DMP configuration verification failed."));
+            return 2; // configuration block loading failed
+        }
+    } else {
+        DEBUG_PRINTLN(F("ERROR! DMP code verification failed."));
+        return 1; // main binary block loading failed
+    }
+    return 0; // success
+}
+
+bool MPU6050::dmpPacketAvailable() {
+    return getFIFOCount() >= dmpGetFIFOPacketSize();
+}
+
+// uint8_t MPU6050::dmpSetFIFORate(uint8_t fifoRate);
+// uint8_t MPU6050::dmpGetFIFORate();
+// uint8_t MPU6050::dmpGetSampleStepSizeMS();
+// uint8_t MPU6050::dmpGetSampleFrequency();
+// int32_t MPU6050::dmpDecodeTemperature(int8_t tempReg);
+
+//uint8_t MPU6050::dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority);
+//uint8_t MPU6050::dmpUnregisterFIFORateProcess(inv_obj_func func);
+//uint8_t MPU6050::dmpRunFIFORateProcesses();
+
+// uint8_t MPU6050::dmpSendQuaternion(uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendPacketNumber(uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy);
+// uint8_t MPU6050::dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy);
+
+uint8_t MPU6050::dmpGetAccel(int32_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[34] << 24) + (packet[35] << 16) + (packet[36] << 8) + packet[37]);
+    data[1] = ((packet[38] << 24) + (packet[39] << 16) + (packet[40] << 8) + packet[41]);
+    data[2] = ((packet[42] << 24) + (packet[43] << 16) + (packet[44] << 8) + packet[45]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetAccel(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = (packet[34] << 8) + packet[35];
+    data[1] = (packet[38] << 8) + packet[39];
+    data[2] = (packet[42] << 8) + packet[43];
+    return 0;
+}
+uint8_t MPU6050::dmpGetAccel(VectorInt16 *v, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    v -> x = (packet[34] << 8) + packet[35];
+    v -> y = (packet[38] << 8) + packet[39];
+    v -> z = (packet[42] << 8) + packet[43];
+    return 0;
+}
+uint8_t MPU6050::dmpGetQuaternion(int32_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[0] << 24) + (packet[1] << 16) + (packet[2] << 8) + packet[3]);
+    data[1] = ((packet[4] << 24) + (packet[5] << 16) + (packet[6] << 8) + packet[7]);
+    data[2] = ((packet[8] << 24) + (packet[9] << 16) + (packet[10] << 8) + packet[11]);
+    data[3] = ((packet[12] << 24) + (packet[13] << 16) + (packet[14] << 8) + packet[15]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetQuaternion(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[0] << 8) + packet[1]);
+    data[1] = ((packet[4] << 8) + packet[5]);
+    data[2] = ((packet[8] << 8) + packet[9]);
+    data[3] = ((packet[12] << 8) + packet[13]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetQuaternion(Quaternion *q, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    int16_t qI[4];
+    uint8_t status = dmpGetQuaternion(qI, packet);
+    if (status == 0) {
+        q -> w = (float)qI[0] / 16384.0f;
+        q -> x = (float)qI[1] / 16384.0f;
+        q -> y = (float)qI[2] / 16384.0f;
+        q -> z = (float)qI[3] / 16384.0f;
+        return 0;
+    }
+    return status; // int16 return value, indicates error if this line is reached
+}
+// uint8_t MPU6050::dmpGet6AxisQuaternion(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetRelativeQuaternion(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetGyro(int32_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = ((packet[16] << 24) + (packet[17] << 16) + (packet[18] << 8) + packet[19]);
+    data[1] = ((packet[20] << 24) + (packet[21] << 16) + (packet[22] << 8) + packet[23]);
+    data[2] = ((packet[24] << 24) + (packet[25] << 16) + (packet[26] << 8) + packet[27]);
+    return 0;
+}
+uint8_t MPU6050::dmpGetGyro(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = (packet[16] << 8) + packet[17];
+    data[1] = (packet[20] << 8) + packet[21];
+    data[2] = (packet[24] << 8) + packet[25];
+    return 0;
+}
+uint8_t MPU6050::dmpGetMag(int16_t *data, const uint8_t* packet) {
+    // TODO: accommodate different arrangements of sent data (ONLY default supported now)
+    if (packet == 0) packet = dmpPacketBuffer;
+    data[0] = (packet[28] << 8) + packet[29];
+    data[1] = (packet[30] << 8) + packet[31];
+    data[2] = (packet[32] << 8) + packet[33];
+    return 0;
+}
+// uint8_t MPU6050::dmpSetLinearAccelFilterCoefficient(float coef);
+// uint8_t MPU6050::dmpGetLinearAccel(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity) {
+    // get rid of the gravity component (+1g = +4096 in standard DMP FIFO packet)
+    v -> x = vRaw -> x - gravity -> x*4096;
+    v -> y = vRaw -> y - gravity -> y*4096;
+    v -> z = vRaw -> z - gravity -> z*4096;
+    return 0;
+}
+// uint8_t MPU6050::dmpGetLinearAccelInWorld(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q) {
+    // rotate measured 3D acceleration vector into original state
+    // frame of reference based on orientation quaternion
+    memcpy(v, vReal, sizeof(VectorInt16));
+    v -> rotate(q);
+    return 0;
+}
+// uint8_t MPU6050::dmpGetGyroAndAccelSensor(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetGyroSensor(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetControlData(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetTemperature(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetGravity(long *data, const uint8_t* packet);
+uint8_t MPU6050::dmpGetGravity(VectorFloat *v, Quaternion *q) {
+    v -> x = 2 * (q -> x*q -> z - q -> w*q -> y);
+    v -> y = 2 * (q -> w*q -> x + q -> y*q -> z);
+    v -> z = q -> w*q -> w - q -> x*q -> x - q -> y*q -> y + q -> z*q -> z;
+    return 0;
+}
+// uint8_t MPU6050::dmpGetUnquantizedAccel(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetQuantizedAccel(long *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetExternalSensorData(long *data, int size, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetEIS(long *data, const uint8_t* packet);
+
+uint8_t MPU6050::dmpGetEuler(float *data, Quaternion *q) {
+    data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1);   // psi
+    data[1] = -asin(2*q -> x*q -> z + 2*q -> w*q -> y);                              // theta
+    data[2] = atan2(2*q -> y*q -> z - 2*q -> w*q -> x, 2*q -> w*q -> w + 2*q -> z*q -> z - 1);   // phi
+    return 0;
+}
+uint8_t MPU6050::dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity) {
+    // yaw: (about Z axis)
+    data[0] = atan2(2*q -> x*q -> y - 2*q -> w*q -> z, 2*q -> w*q -> w + 2*q -> x*q -> x - 1);
+    // pitch: (nose up/down, about Y axis)
+    data[1] = atan(gravity -> x / sqrt(gravity -> y*gravity -> y + gravity -> z*gravity -> z));
+    // roll: (tilt left/right, about X axis)
+    data[2] = atan(gravity -> y / sqrt(gravity -> x*gravity -> x + gravity -> z*gravity -> z));
+    return 0;
+}
+
+// uint8_t MPU6050::dmpGetAccelFloat(float *data, const uint8_t* packet);
+// uint8_t MPU6050::dmpGetQuaternionFloat(float *data, const uint8_t* packet);
+
+uint8_t MPU6050::dmpProcessFIFOPacket(const unsigned char *dmpData) {
+    /*for (uint8_t k = 0; k < dmpPacketSize; k++) {
+        if (dmpData[k] < 0x10) Serial.print("0");
+        Serial.print(dmpData[k], HEX);
+        Serial.print(" ");
+    }
+    Serial.print("\n");*/
+    //Serial.println((uint16_t)dmpPacketBuffer);
+    return 0;
+}
+uint8_t MPU6050::dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed) {
+    uint8_t status;
+    uint8_t buf[dmpPacketSize];
+    for (uint8_t i = 0; i < numPackets; i++) {
+        // read packet from FIFO
+        getFIFOBytes(buf, dmpPacketSize);
+
+        // process packet
+        if ((status = dmpProcessFIFOPacket(buf)) > 0) return status;
+        
+        // increment external process count variable, if supplied
+        if (processed != 0) *processed++;
+    }
+    return 0;
+}
+
+// uint8_t MPU6050::dmpSetFIFOProcessedCallback(void (*func) (void));
+
+// uint8_t MPU6050::dmpInitFIFOParam();
+// uint8_t MPU6050::dmpCloseFIFO();
+// uint8_t MPU6050::dmpSetGyroDataSource(uint_fast8_t source);
+// uint8_t MPU6050::dmpDecodeQuantizedAccel();
+// uint32_t MPU6050::dmpGetGyroSumOfSquare();
+// uint32_t MPU6050::dmpGetAccelSumOfSquare();
+// void MPU6050::dmpOverrideQuaternion(long *q);
+uint16_t MPU6050::dmpGetFIFOPacketSize() {
+    return dmpPacketSize;
+}
+
+#endif /* _MPU6050_9AXIS_MOTIONAPPS41_H_ */

libraries/MPU6050/helper_3dmath.h

@@ -0,0 +1,216 @@
+// I2C device class (I2Cdev) demonstration Arduino sketch for MPU6050 class, 3D math helper
+// 6/5/2012 by Jeff Rowberg <jeff@rowberg.net>
+// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
+//
+// Changelog:
+//     2012-06-05 - add 3D math helper file to DMP6 example sketch
+
+/* ============================================
+I2Cdev device library code is placed under the MIT license
+Copyright (c) 2012 Jeff Rowberg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+===============================================
+*/
+
+#ifndef _HELPER_3DMATH_H_
+#define _HELPER_3DMATH_H_
+
+class Quaternion {
+    public:
+        float w;
+        float x;
+        float y;
+        float z;
+        
+        Quaternion() {
+            w = 1.0f;
+            x = 0.0f;
+            y = 0.0f;
+            z = 0.0f;
+        }
+        
+        Quaternion(float nw, float nx, float ny, float nz) {
+            w = nw;
+            x = nx;
+            y = ny;
+            z = nz;
+        }
+
+        Quaternion getProduct(Quaternion q) {
+            // Quaternion multiplication is defined by:
+            //     (Q1 * Q2).w = (w1w2 - x1x2 - y1y2 - z1z2)
+            //     (Q1 * Q2).x = (w1x2 + x1w2 + y1z2 - z1y2)
+            //     (Q1 * Q2).y = (w1y2 - x1z2 + y1w2 + z1x2)
+            //     (Q1 * Q2).z = (w1z2 + x1y2 - y1x2 + z1w2
+            return Quaternion(
+                w*q.w - x*q.x - y*q.y - z*q.z,  // new w
+                w*q.x + x*q.w + y*q.z - z*q.y,  // new x
+                w*q.y - x*q.z + y*q.w + z*q.x,  // new y
+                w*q.z + x*q.y - y*q.x + z*q.w); // new z
+        }
+
+        Quaternion getConjugate() {
+            return Quaternion(w, -x, -y, -z);
+        }
+        
+        float getMagnitude() {
+            return sqrt(w*w + x*x + y*y + z*z);
+        }
+        
+        void normalize() {
+            float m = getMagnitude();
+            w /= m;
+            x /= m;
+            y /= m;
+            z /= m;
+        }
+        
+        Quaternion getNormalized() {
+            Quaternion r(w, x, y, z);
+            r.normalize();
+            return r;
+        }
+};
+
+class VectorInt16 {
+    public:
+        int16_t x;
+        int16_t y;
+        int16_t z;
+
+        VectorInt16() {
+            x = 0;
+            y = 0;
+            z = 0;
+        }
+        
+        VectorInt16(int16_t nx, int16_t ny, int16_t nz) {
+            x = nx;
+            y = ny;
+            z = nz;
+        }
+
+        float getMagnitude() {
+            return sqrt(x*x + y*y + z*z);
+        }
+
+        void normalize() {
+            float m = getMagnitude();
+            x /= m;
+            y /= m;
+            z /= m;
+        }
+        
+        VectorInt16 getNormalized() {
+            VectorInt16 r(x, y, z);
+            r.normalize();
+            return r;
+        }
+        
+        void rotate(Quaternion *q) {
+            // http://www.cprogramming.com/tutorial/3d/quaternions.html
+            // http://www.euclideanspace.com/maths/algebra/realNormedAlgebra/quaternions/transforms/index.htm
+            // http://content.gpwiki.org/index.php/OpenGL:Tutorials:Using_Quaternions_to_represent_rotation
+            // ^ or: http://webcache.googleusercontent.com/search?q=cache:xgJAp3bDNhQJ:content.gpwiki.org/index.php/OpenGL:Tutorials:Using_Quaternions_to_represent_rotation&hl=en&gl=us&strip=1
+        
+            // P_out = q * P_in * conj(q)
+            // - P_out is the output vector
+            // - q is the orientation quaternion
+            // - P_in is the input vector (a*aReal)
+            // - conj(q) is the conjugate of the orientation quaternion (q=[w,x,y,z], q*=[w,-x,-y,-z])
+            Quaternion p(0, x, y, z);
+
+            // quaternion multiplication: q * p, stored back in p
+            p = q -> getProduct(p);
+
+            // quaternion multiplication: p * conj(q), stored back in p
+            p = p.getProduct(q -> getConjugate());
+
+            // p quaternion is now [0, x', y', z']
+            x = p.x;
+            y = p.y;
+            z = p.z;
+        }
+
+        VectorInt16 getRotated(Quaternion *q) {
+            VectorInt16 r(x, y, z);
+            r.rotate(q);
+            return r;
+        }
+};
+
+class VectorFloat {
+    public:
+        float x;
+        float y;
+        float z;
+
+        VectorFloat() {
+            x = 0;
+            y = 0;
+            z = 0;
+        }
+        
+        VectorFloat(float nx, float ny, float nz) {
+            x = nx;
+            y = ny;
+            z = nz;
+        }
+
+        float getMagnitude() {
+            return sqrt(x*x + y*y + z*z);
+        }
+
+        void normalize() {
+            float m = getMagnitude();
+            x /= m;
+            y /= m;
+            z /= m;
+        }
+        
+        VectorFloat getNormalized() {
+            VectorFloat r(x, y, z);
+            r.normalize();
+            return r;
+        }
+        
+        void rotate(Quaternion *q) {
+            Quaternion p(0, x, y, z);
+
+            // quaternion multiplication: q * p, stored back in p
+            p = q -> getProduct(p);
+
+            // quaternion multiplication: p * conj(q), stored back in p
+            p = p.getProduct(q -> getConjugate());
+
+            // p quaternion is now [0, x', y', z']
+            x = p.x;
+            y = p.y;
+            z = p.z;
+        }
+
+        VectorFloat getRotated(Quaternion *q) {
+            VectorFloat r(x, y, z);
+            r.rotate(q);
+            return r;
+        }
+};
+
+#endif /* _HELPER_3DMATH_H_ */