added comment and 3b1d setup

package/1bar_1display.yaml

@@ -1,11 +1,15 @@
+###########################################
+##                                       ##
+##   filename: 1bar_1display.yaml        ##
+##   description: Specific configuration ##
+##   for the 1 BAR 1 Display setup       ##
+##                                       ##
+###########################################
+
 packages: 
     base: !include base.yaml
 
 mcp23008:
-  # - id: 'base_J0'
-  #   address: 0x20
-  # - id: 'base_J1'
-  #   address: 0x21
   - id: 'base_J2'
     i2c_id: buttons
     address: 0x22
@@ -14,6 +18,9 @@ mcp23008:
     address: 0x23
 
 binary_sensor:
+  ############################
+  ### Buttons Main Display ###
+  ############################
   - platform: gpio
     id: 'base_j2_btn_left'
     name: "Display button Left"
@@ -22,7 +29,6 @@ binary_sensor:
       number: 6
       mode: INPUT_PULLUP
       inverted: true
-
   - platform: gpio
     id: 'base_j2_btn_right'
     name: "Display button Right"
@@ -32,6 +38,9 @@ binary_sensor:
       mode: INPUT_PULLUP
       inverted: true
 
+  ############################
+  ### Buttons BAR module 1 ###
+  ############################
   - platform: gpio
     id: 'base_j3_btn_left'
     name: "BAR button Left"
@@ -40,7 +49,6 @@ binary_sensor:
       number: 6
       mode: INPUT_PULLUP
       inverted: true
-
   - platform: gpio
     id: 'base_j3_btn_right'
     name: "BAR button Right"
@@ -53,6 +61,9 @@ binary_sensor:
 light:
   - id: !extend neopixels
     num_leds: 5
+  ############################
+  ### RGB LED's BAR module ###
+  ############################
   - platform: partition
     name: "BAR J3 Left RGB Front"
     id: bar_j3_left_rgb_front
@@ -82,11 +93,10 @@ light:
         from: 3
         to: 3
 
-time:
-  - platform: homeassistant
-    id: esptime
-
 display:
+  ####################
+  ### Main Display ###
+  ####################
   - id: display_j2_main
     platform: ili9xxx
     model: ili9341
@@ -106,6 +116,9 @@ display:
       height: 240
       width: 320
     rotation: 180
+  ##################
+  ### BAR module ###
+  ##################
   - id: display_j3_Left
     platform: ili9xxx
     model: ST7735

package/2bar_1display.yaml

@@ -1,9 +1,16 @@
+###########################################
+##                                       ##
+##   filename: base.yaml                 ##
+##   description: contains configuration ##
+##   that will be the same for all the   ##
+##   possible setups                     ##
+##                                       ##
+###########################################
+
 packages: 
     base: !include base.yaml
 
 mcp23008:
-  # - id: 'base_J0'
-  #   address: 0x20
   - id: 'base_J1'
     address: 0x21
   - id: 'base_J2'
@@ -14,6 +21,9 @@ mcp23008:
     address: 0x23
 
 binary_sensor:
+  ############################
+  ### Buttons Main Display ###
+  ############################
   - platform: gpio
     id: 'base_j1_btn_left'
     name: "Display button Left"
@@ -22,7 +32,6 @@ binary_sensor:
       number: 6
       mode: INPUT_PULLUP
       inverted: true
-
   - platform: gpio
     id: 'base_j1_btn_right'
     name: "Display button Right"
@@ -32,6 +41,9 @@ binary_sensor:
       mode: INPUT_PULLUP
       inverted: true
       
+  ############################
+  ### Buttons BAR module 1 ###
+  ############################
   - platform: gpio
     id: 'base_j2_btn_left'
     name: "BAR 1 button Left"
@@ -40,7 +52,6 @@ binary_sensor:
       number: 6
       mode: INPUT_PULLUP
       inverted: true
-
   - platform: gpio
     id: 'base_j2_btn_right'
     name: "BAR 1 button Right"
@@ -50,6 +61,9 @@ binary_sensor:
       mode: INPUT_PULLUP
       inverted: true
 
+  ############################
+  ### Buttons BAR module 2 ###
+  ############################
   - platform: gpio
     id: 'base_j3_btn_left'
     name: "BAR 2 button Left"
@@ -58,7 +72,6 @@ binary_sensor:
       number: 6
       mode: INPUT_PULLUP
       inverted: true
-
   - platform: gpio
     id: 'base_j3_btn_right'
     name: "BAR 2 button Right"
@@ -69,6 +82,9 @@ binary_sensor:
       inverted: true
 
 light:
+  ##############################
+  ### RGB LED's BAR module 1 ###
+  ##############################
   - id: !extend neopixels
     num_leds: 9
   - platform: partition
@@ -99,6 +115,9 @@ light:
       - id: neopixels
         from: 3
         to: 3
+  ##############################
+  ### RGB LED's BAR module 2 ###
+  ##############################
   - platform: partition
     name: "BAR 2 Left RGB Front"
     id: bar_2_left_rgb_front
@@ -128,12 +147,11 @@ light:
         from: 7
         to: 7
 
-time:
-  - platform: homeassistant
-    id: esptime
-
 display:
-  - id: display_j2_main
+  ####################
+  ### Main Display ###
+  ####################
+  - id: display_j1_main
     platform: ili9xxx
     model: ili9341
     invert_colors: false
@@ -141,7 +159,7 @@ display:
       number: GPIO37
       allow_other_uses: true
     cs_pin: 
-      mcp23xxx: base_J2
+      mcp23xxx: base_J1
       number: 5
       mode:
         output: true
@@ -152,6 +170,52 @@ display:
       height: 240
       width: 320
     rotation: 180
+  ####################
+  ### BAR module 1 ###
+  ####################
+  - id: display_j2_Left
+    platform: ili9xxx
+    model: ST7735
+    dc_pin: 
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J3
+      number: 5
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 270
+    update_interval: 1s
+  - id: display_j2_Right
+    platform: ili9xxx
+    model: ST7735
+    dc_pin:
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J2
+      number: 1
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 90
+    update_interval: 1s
+  ####################
+  ### BAR module 2 ###
+  ####################
   - id: display_j3_Left
     platform: ili9xxx
     model: ST7735

package/3bar_1display.yaml

@@ -0,0 +1,354 @@
+###########################################
+##                                       ##
+##   filename: base.yaml                 ##
+##   description: contains configuration ##
+##   that will be the same for all the   ##
+##   possible setups                     ##
+##                                       ##
+###########################################
+
+packages: 
+    base: !include base.yaml
+
+mcp23008:
+  - id: 'base_J0'
+    address: 0x20
+  - id: 'base_J1'
+    address: 0x21
+  - id: 'base_J2'
+    i2c_id: buttons
+    address: 0x22
+  - id: 'base_J3'
+    i2c_id: buttons
+    address: 0x23
+
+binary_sensor:
+  ############################
+  ### Buttons Main Display ###
+  ############################
+  - platform: gpio
+    id: 'base_j0_btn_left'
+    name: "Display button Left"
+    pin: 
+      mcp23xxx: base_J0
+      number: 6
+      mode: INPUT_PULLUP
+      inverted: true
+  - platform: gpio
+    id: 'base_j0_btn_right'
+    name: "Display button Right"
+    pin: 
+      mcp23xxx: base_J0
+      number: 2
+      mode: INPUT_PULLUP
+      inverted: true
+      
+  ############################
+  ### Buttons BAR module 1 ###
+  ############################
+  - platform: gpio
+    id: 'base_j1_btn_left'
+    name: "BAR 1 button Left"
+    pin: 
+      mcp23xxx: base_J1
+      number: 6
+      mode: INPUT_PULLUP
+      inverted: true
+  - platform: gpio
+    id: 'base_j1_btn_right'
+    name: "BAR 1 button Right"
+    pin: 
+      mcp23xxx: base_J1
+      number: 2
+      mode: INPUT_PULLUP
+      inverted: true
+      
+  ############################
+  ### Buttons BAR module 2 ###
+  ############################
+  - platform: gpio
+    id: 'base_j2_btn_left'
+    name: "BAR 2 button Left"
+    pin: 
+      mcp23xxx: base_J2
+      number: 6
+      mode: INPUT_PULLUP
+      inverted: true
+  - platform: gpio
+    id: 'base_j2_btn_right'
+    name: "BAR 2 button Right"
+    pin: 
+      mcp23xxx: base_J2
+      number: 2
+      mode: INPUT_PULLUP
+      inverted: true
+
+  ############################
+  ### Buttons BAR module 3 ###
+  ############################
+  - platform: gpio
+    id: 'base_j3_btn_left'
+    name: "BAR 3 button Left"
+    pin: 
+      mcp23xxx: base_J3
+      number: 6
+      mode: INPUT_PULLUP
+      inverted: true
+  - platform: gpio
+    id: 'base_j3_btn_right'
+    name: "BAR 3 button Right"
+    pin: 
+      mcp23xxx: base_J3
+      number: 2
+      mode: INPUT_PULLUP
+      inverted: true
+
+light:
+  ##############################
+  ### RGB LED's BAR module 1 ###
+  ##############################
+  - id: !extend neopixels
+    num_leds: 9
+  - platform: partition
+    name: "BAR 1 Left RGB Front"
+    id: bar_1_left_rgb_front
+    segments:
+      - id: neopixels
+        from: 0
+        to: 0
+  - platform: partition
+    name: "BAR 1 Left RGB Back"
+    id: bar_1_left_rgb_back
+    segments:
+      - id: neopixels
+        from: 1
+        to: 1
+  - platform: partition
+    name: "BAR 1 Right RGB Front"
+    id: bar_1_right_rgb_front
+    segments:
+      - id: neopixels
+        from: 2
+        to: 2
+  - platform: partition
+    name: "BAR 1 Right RGB Back"
+    id: bar_1_right_rgb_back
+    segments:
+      - id: neopixels
+        from: 3
+        to: 3
+  ##############################
+  ### RGB LED's BAR module 2 ###
+  ##############################
+  - platform: partition
+    name: "BAR 2 Left RGB Front"
+    id: bar_2_left_rgb_front
+    segments:
+      - id: neopixels
+        from: 4
+        to: 4
+  - platform: partition
+    name: "BAR 2 Left RGB Back"
+    id: bar_2_left_rgb_back
+    segments:
+      - id: neopixels
+        from: 5
+        to: 5
+  - platform: partition
+    name: "BAR 2 Right RGB Front"
+    id: bar_2_right_rgb_front
+    segments:
+      - id: neopixels
+        from: 6
+        to: 6
+  - platform: partition
+    name: "BAR 2 Right RGB Back"
+    id: bar_2_right_rgb_back
+    segments:
+      - id: neopixels
+        from: 7
+        to: 7
+  ##############################
+  ### RGB LED's BAR module 3 ###
+  ##############################
+  - platform: partition
+    name: "BAR 3 Left RGB Front"
+    id: bar_3_left_rgb_front
+    segments:
+      - id: neopixels
+        from: 8
+        to: 8
+  - platform: partition
+    name: "BAR 3 Left RGB Back"
+    id: bar_3_left_rgb_back
+    segments:
+      - id: neopixels
+        from: 9
+        to: 9
+  - platform: partition
+    name: "BAR 3 Right RGB Front"
+    id: bar_3_right_rgb_front
+    segments:
+      - id: neopixels
+        from: 10 
+        to: 10
+  - platform: partition
+    name: "BAR 3 Right RGB Back"
+    id: bar_3_right_rgb_back
+    segments:
+      - id: neopixels
+        from: 11
+        to: 11
+
+display:
+  ####################
+  ### Main Display ###
+  ####################
+  - id: display_j0_main
+    platform: ili9xxx
+    model: ili9341
+    invert_colors: false
+    dc_pin: 
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J0
+      number: 5
+      mode:
+        output: true
+      inverted: false
+    update_interval: 200ms
+    show_test_card: false
+    dimensions: 
+      height: 240
+      width: 320
+    rotation: 180
+  ####################
+  ### BAR module 1 ###
+  ####################
+  - id: display_j1_Left
+    platform: ili9xxx
+    model: ST7735
+    dc_pin: 
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J1
+      number: 5
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 270
+    update_interval: 1s
+  - id: display_j1_Right
+    platform: ili9xxx
+    model: ST7735
+    dc_pin:
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J1
+      number: 1
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 90
+    update_interval: 1s
+  ####################
+  ### BAR module 2 ###
+  ####################
+  - id: display_j2_Left
+    platform: ili9xxx
+    model: ST7735
+    dc_pin: 
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J2
+      number: 5
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 270
+    update_interval: 1s
+  - id: display_j2_Right
+    platform: ili9xxx
+    model: ST7735
+    dc_pin:
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J2
+      number: 1
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 90
+    update_interval: 1s
+  ####################
+  ### BAR module 3 ###
+  ####################
+  - id: display_j3_Left
+    platform: ili9xxx
+    model: ST7735
+    dc_pin: 
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J3
+      number: 5
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 270
+    update_interval: 1s
+  - id: display_j3_Right
+    platform: ili9xxx
+    model: ST7735
+    dc_pin:
+      number: GPIO37
+      allow_other_uses: true
+    cs_pin: 
+      mcp23xxx: base_J3
+      number: 1
+      mode:
+        output: true
+      inverted: false
+    invert_colors: false
+    show_test_card: false
+    dimensions: 
+      height: 160
+      width: 80
+      offset_width: 24
+    rotation: 90
+    update_interval: 1s

package/base.yaml

@@ -1,3 +1,12 @@
+###########################################
+##                                       ##
+##   filename: base.yaml                 ##
+##   description: contains configuration ##
+##   that will be the same for all the   ##
+##   possible configurations             ##
+##                                       ##
+###########################################
+
 i2c:
   - id: temperature_sensor
     sda: GPIO1
@@ -12,7 +21,6 @@ i2c:
 spi:
   clk_pin: GPIO36
   mosi_pin: GPIO35
-  # miso_pin: GPIOXX
 
 output:
   - platform: ledc
@@ -38,7 +46,7 @@ light:
     type: RGB
     variant: WS2812
     pin: GPIO4
-    num_leds: 20
+    num_leds: 17
   - platform: monochromatic
     output: displays_mini_backlight_pwm
     name: "Mini Display Backlight"
@@ -49,3 +57,7 @@ light:
     name: "Main Display Backlight"
     id: display_main_backlight
     restore_mode: ALWAYS_ON
+    
+time:
+  - platform: homeassistant
+    id: datetime