All B+ features working

Examples/basic_example.yaml

@@ -1,9 +1,14 @@
+### 
+### This is a basic example, showing all features of the Button+
+### 
+
 esphome:
   name: buttonplus-test
   friendly_name: ButtonPlus_test
 
 esp32:
   board: esp32-s3-devkitc-1
+  flash_size: 16MB
   framework:
     type: arduino
 
@@ -22,23 +27,22 @@ ota:
 wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "Buttonplus-Test Fallback Hotspot"
-    password: "m8FaRl2yzalt"
-
-captive_portal:
     
 i2c:
-  sda: GPIO47
-  scl: GPIO48
-  scan: true
-  frequency: 400khz
+  - id: temperature_sensor
+    sda: GPIO1
+    scl: GPIO2
+    scan: true
+  - id: buttons
+    sda: GPIO47
+    scl: GPIO48
+    scan: true
+    frequency: 400khz
 
 spi:
   clk_pin: GPIO36
   mosi_pin: GPIO35
+  # miso_pin: GPIOXX
 
 mcp23008:
   # - id: 'base_J0'
@@ -46,8 +50,10 @@ mcp23008:
   # - id: 'base_J1'
   #   address: 0x21
   - id: 'base_J2'
+    i2c_id: buttons
     address: 0x22
   - id: 'base_J3'
+    i2c_id: buttons
     address: 0x23
 
 # Define a PWM output on the ESP32
@@ -98,6 +104,18 @@ binary_sensor:
       mode: INPUT_PULLUP
       inverted: true
 
+sensor:
+  - platform: sts3x
+    id: inside_temperature
+    i2c_id: temperature_sensor
+    name: "Temperature"
+    address: 0x4A
+    update_interval: 10s
+  - platform: homeassistant
+    id: outside_temperature
+    entity_id: sensor.gw1100a_outdoor_temperature
+    internal: true
+
 light:
   - platform: monochromatic
     output: displays_mini_backlight_pwm
@@ -109,6 +127,74 @@ light:
     name: "Main Display Backlight"
     id: display_main_backlight
     restore_mode: ALWAYS_ON
+  - platform: neopixelbus
+    id: neopixels
+    type: RGB
+    variant: WS2812
+    pin: GPIO4
+    num_leds: 8
+  - platform: partition
+    name: "BAR J3 Left RGB Front"
+    id: bar_j3_left_rgb_front
+    segments:
+      - id: neopixels
+        from: 0
+        to: 0
+  - platform: partition
+    name: "BAR J3 Left RGB Back"
+    id: bar_j3_left_rgb_back
+    segments:
+      - id: neopixels
+        from: 1
+        to: 1
+  - platform: partition
+    name: "BAR J3 Right RGB Front"
+    id: bar_j3_right_rgb_front
+    segments:
+      - id: neopixels
+        from: 2
+        to: 2
+  - platform: partition
+    name: "BAR J3 Right RGB Back"
+    id: bar_j3_right_rgb_back
+    segments:
+      - id: neopixels
+        from: 3
+        to: 3
+
+time:
+  - platform: homeassistant
+    id: esptime
+
+font:
+  - file: "https://github.com/web-fonts/ttf/raw/refs/heads/master/bpg-ingiri-arial-webfont.ttf"
+    id: my_font20
+    size: 20
+  - file: "https://github.com/web-fonts/ttf/raw/refs/heads/master/bpg-ingiri-arial-webfont.ttf"
+    id: my_font15
+    size: 15
+  - file: "https://github.com/web-fonts/ttf/raw/refs/heads/master/bpg-ingiri-arial-webfont.ttf"
+    id: my_font40
+    size: 40
+
+image:
+  - file: mdi:lightbulb
+    id: lightbulb
+    resize: 80x80
+  - file: mdi:alert
+    id: alert
+    resize: 80x80
+  - file: "https://i.postimg.cc/CMXFmZ5n/henk.png"
+    id: henk
+    resize: 120x100
+    type: RGBA
+    use_transparency: true
+
+color:
+  - id: red
+    hex: 0000FF
+  - id: blue
+    hex: FF0000
 
 display:
   - id: display_j2_main
@@ -124,14 +210,32 @@ display:
       mode:
         output: true
       inverted: false
-    update_interval: 1s
+    update_interval: 100ms
     show_test_card: false
     dimensions: 
       height: 240
       width: 320
     rotation: 180
     lambda: |-
-      it.print(0, 25, id(my_font), "Hello World! From ESPHome");
+      // Print inside temperature (from homeassistant sensor)
+      if (id(inside_temperature).has_state()) {
+        it.printf(2, 60, id(my_font20), id(blue), TextAlign::BASELINE_LEFT , "%.1f°", id(inside_temperature).state);
+      }
+      it.printf(2, 80, id(my_font15), id(blue), TextAlign::BASELINE_LEFT, "Binnen");
+
+      // Print time and date
+      it.strftime(160, 60, id(my_font40), TextAlign::BASELINE_CENTER, "%H:%M", id(esptime).now());
+      it.strftime(160, 80, id(my_font20), id(red), TextAlign::BASELINE_CENTER, "%d-%m-%Y", id(esptime).now());
+
+      // Print outside temperature (from homeassistant sensor)
+      if (id(outside_temperature).has_state()) {
+        it.printf(316, 60, id(my_font20), id(blue), TextAlign::BASELINE_RIGHT , "%.1f°", id(outside_temperature).state);
+      }
+
+      it.printf(316, 80, id(my_font15), id(blue), TextAlign::BASELINE_RIGHT, "Buiten");
+
+      // Draw the image my_online_image at position
+      it.image(160, 100, id(henk), ImageAlign::TOP_CENTER);
   - id: display_j3_Left
     platform: ili9xxx
     model: ST7735
@@ -153,7 +257,7 @@ display:
     rotation: 270
     update_interval: 1s
     lambda: |-
-      it.print(0, 25, id(my_font), "Hello World! From ESPHome");
+      it.image(80, 0, id(lightbulb), ImageAlign::TOP_CENTER, id(red));
   - id: display_j3_Right
     platform: ili9xxx
     model: ST7735
@@ -175,9 +279,5 @@ display:
     rotation: 90
     update_interval: 1s
     lambda: |-
-      it.print(0, 25, id(my_font), "Hello World! From ESPHome");
-
-font:
-  - file: "gfonts://Roboto"
-    id: my_font
-    size: 20
+      //it.print(0, 25, id(my_font15), "Hello B+! From ESPHome");
+      it.image(80, 0, id(alert), ImageAlign::TOP_CENTER);