esphome:
  name: buttonplus-test
  friendly_name: ButtonPlus_test

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "2IF/Aa3Sf31DyZpHOBhDoQM1+RuDeLZhHbVSmKVdwx0="

ota:
  - platform: esphome
    password: "f3063af8596a5910fc4798ff4efee4dc"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Buttonplus-Test Fallback Hotspot"
    password: "m8FaRl2yzalt"

captive_portal:
    
i2c:
  sda: GPIO47
  scl: GPIO48
  scan: true
  frequency: 400khz

spi:
  clk_pin: GPIO36
  mosi_pin: GPIO35

mcp23008:
  # - id: 'base_J0'
  #   address: 0x20
  # - id: 'base_J1'
  #   address: 0x21
  - id: 'base_J2'
    address: 0x22
  - id: 'base_J3'
    address: 0x23

# Define a PWM output on the ESP32
output:
  - platform: ledc
    pin: GPIO46
    id: displays_mini_backlight_pwm
    inverted: True
  - platform: ledc
    pin: GPIO3
    id: display_main_backlight_pwm
    inverted: True

binary_sensor:
  - platform: gpio
    id: 'base_j2_btn_left'
    name: "Display button Left"
    pin: 
      mcp23xxx: base_J2
      number: 6
      mode: INPUT_PULLUP
      inverted: true

  - platform: gpio
    id: 'base_j2_btn_right'
    name: "Display button Right"
    pin: 
      mcp23xxx: base_J2
      number: 2
      mode: INPUT_PULLUP
      inverted: true

  - platform: gpio
    id: 'base_j3_btn_left'
    name: "BAR button Left"
    pin: 
      mcp23xxx: base_J3
      number: 6
      mode: INPUT_PULLUP
      inverted: true

  - platform: gpio
    id: 'base_j3_btn_right'
    name: "BAR button Right"
    pin: 
      mcp23xxx: base_J3
      number: 2
      mode: INPUT_PULLUP
      inverted: true

light:
  - platform: monochromatic
    output: displays_mini_backlight_pwm
    name: "Mini Display Backlight"
    id: displays_mini_backlight
    restore_mode: ALWAYS_ON
  - platform: monochromatic
    output: display_main_backlight_pwm
    name: "Main Display Backlight"
    id: display_main_backlight
    restore_mode: ALWAYS_ON

display:
  - id: display_j2_main
    platform: ili9xxx
    model: ili9341
    invert_colors: false
    dc_pin: 
      number: GPIO37
      allow_other_uses: true
    cs_pin: 
      mcp23xxx: base_J2
      number: 5
      mode:
        output: true
      inverted: false
    update_interval: 1s
    show_test_card: false
    dimensions: 
      height: 240
      width: 320
    rotation: 180
    lambda: |-
      it.print(0, 25, id(my_font), "Hello World! From ESPHome");
  - id: display_j3_Left
    platform: ili9xxx
    model: ST7735
    dc_pin: 
      number: GPIO37
      allow_other_uses: true
    cs_pin: 
      mcp23xxx: base_J3
      number: 5
      mode:
        output: true
      inverted: false
    invert_colors: false
    show_test_card: false
    dimensions: 
      height: 160
      width: 80
      offset_width: 24
    rotation: 270
    update_interval: 1s
    lambda: |-
      it.print(0, 25, id(my_font), "Hello World! From ESPHome");
  - id: display_j3_Right
    platform: ili9xxx
    model: ST7735
    dc_pin:
      number: GPIO37
      allow_other_uses: true
    cs_pin: 
      mcp23xxx: base_J3
      number: 1
      mode:
        output: true
      inverted: false
    invert_colors: false
    show_test_card: false
    dimensions: 
      height: 160
      width: 80
      offset_width: 24
    rotation: 90
    update_interval: 1s
    lambda: |-
      it.print(0, 25, id(my_font), "Hello World! From ESPHome");

font:
  - file: "gfonts://Roboto"
    id: my_font
    size: 20